cepilladoras usadas para la venta

SPECIFICATIONS: Entrance headstock of mm: 2500 Number of spindles: 5 Spindle Configuration: I Down - CW 5,5 II - III right-left - week 7.5 IV Top - CW 5.5 V Down - CW 4.0 Cardan shaft drive Gear motor KW: 2.2  ... más información

Planing machine Weinig hydromat H30 W baujar 1990 36m/min Working width 300mm working-high 200mm memeeser of the fresspindel 50mm with suction  ... más información

Working width: 530 mmLength of the planing table: 1550 mmNumber of knives: 4 St.Motor output: 4 kWDimensions (L/W/H): 2900x 800 x 960 mmweight of the machine ca.: 800 kgSAC type FS 530--------------------------------Working width: 530 mmTotal table length: 2,900 mmFeed table: 1550 mmDispensing table: 1,310 mmTable height: 800 mmPower: 4kWSpeed: 5,000 rpmNumber of knives: 4(technical information according to the manufacturer - without guarantee!)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 530 mm; Planing shaft: Centrofix; Number of knives: 4; Dressing table length: 2200 mm; Dressing stop angle adjustable: yes; folding up the dressing tables: manually; maximum clearance thickness planer: 220 mm; Height adjustment thickness table: electric; Display of planer thickness: mech. Counting display; Feed speed: 7 / 14 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure beams: articulated; Table rollers: no; Motor power: 5.5 kW; Engine braking: yes, automatic; Suction connection: 160mm; Machine length: 2300 mm; Machine width: 950 mm; Weight: 1050;

working width: 180 mm; working height: 120 mm; working spindles: 4; spindle following: down, right, left, up; motor power spindle down: 3,7 kW; motor power spindle right: 3,7 kW; motor power spindle left: 3,7 kW; motor power spindle up: 5,5 kW; adjustment spindle down: -; adjustment spindle right: -; adjustment spindle left: manual; adjustment spindle up: electric; cutter heads: turn cutter; feed speed: 2; feed pressure: feather; current consumption: 38 A; motor brake: automatisch; suction connection: machine length: machine width: weight:

SCM moulder model SUPERSET 23 with 5 shafts: - Useful working dimensions 230x120mm - Alfasistel electronic control for 2-axis programming - Cardan drive and differentiated pneumatic pressure - Variable feed speed from 4 to 26 m/min - feed unit before the 1st shaft, with quick override - drive roller in the plane after the 5th shaft - 2500mm entrance level - Deck lubrication pump - shafts D=40mm at 6000rpm - Complete with 4 knife heads Trees: - Under HP -right - Left (right+left with single HP engine) - Above HP - Under HP

REX HOMS 2050 Trimmer Machine year 1991 The machine is located in Spain. ... más información

Working width: 530 mm; Planing height: 250 mm; Planer shaft: strip knife; Number of knives: 4; Height adjustment: electric; Planer thickness indicator: Mechanical counter; Feed speed: 2 speeds; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 5.5 kW; Suction connection: 160mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 900kg;

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package ... más información

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package ... más información

Capacity: 180 x 100 mm.Spindles: 4Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kWMotorised thickness adjustment4 cutterblocks ChaindriveInfeed table 1m70. long ... más información

Working width: 530 mmLength of the planing table: 2.900 mmNumber of knives: 4 St.Motor output: 4 kWweight of the machine ca.: 850 kg: Tersa : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

working width: 180 mm; working height: 120 mm; number of spindles: 4; Spindle configuration: unten, rechts, links, oben; motor shaft spindle down: ca. 5,5 kW; motor shaft spindle top: ca. 5,5 kW; motor shaft spindle right: ca. 5,5 kW; Motorleistung Welle left: ca. 5,5 kW; adjustment shaft down: Kurbel; adjustment shaft right: Kurbel; adjustment shaft left: Kurbel; adjustment shaft top: elektrisch; cutter heads: Wendemesser; feed speed: stufenlos; feeder pressure: Feder; power consuption: 20 kW; motorbrake: - ; weight:

Profimat 22 n 5 spindle  ... más información

2-sided planing machine with slot bed: Year of construction 1993 Working width 170 mm Working height 120 mm Working height 4-sided 120 mm Number of spindles 4 Spindle arrangement u-o-u-o Diameter of the spindles 50 mm Spindle speed 6000 rpm Engine power 30-22-11-11 kW Feed speed 12-120 m/min Driven rollers in table 6 Automatic table lubrication Table height constant 840 Diameter of the suction nozzles 4x160 mm Weight 4500 kg Space requirement 4000x1700x1400 mm Voltage / Frequency 400V 50Hz 3Ph.

Inv. Num. : 7406 Type: RISZ 16 Producer: ARTHUR KLINK Created: 1993 Parameters: Theoretical diameter of the tool: 95 mm Max. workpiece height: 300 mm Clamping surface: 400x400 mm Maximum working stroke: 1250 mm Maximum stretching force: 16 t Weight: 6900 kg  ... más información

working width: 630 mm; cutter head: Streifenmesser; number of blades: 4; table length: 2800 mm; adjustment table: Hebel; read out table hight: Scala; motor power: 5,5 kW; machine length: 2800 mm; machine width: 1000mm; weight: 1050 kg;  ... más información

Planing width approx. 490/500 mm (at end position dressing stop) Table width 52 cm Table length 2210 mm Tersa planing shaft (4 knives) Motor power 7.5 kW Table height adjustment electric Thickness table guided on 4 spindles 2 feed speeds manual star-delta switch Emergency stop switch Suction nozzle Ø 160 mm Power: 400 V, 50 Hz, 3~, 15.5 A

Description: - Capacity: 180X120MM - Toolholder with 2 sharpening knives - Machine set-up on QTS digital axes - Centralized lubrication - Lubrication crank handle - Double tool clamping key - Iron adjuster - Soundproof enclosure with electromagnetic safety device - Planer motor: 4KW - Motor for two shapers: 5.5KW - Planer motor: 5.5KW - Feed roller in the outfeed table - Suction intake: 120/100/100/120mm - Machine dimensions: 3000X1000X1450mm - Weight: 1200Kg Machine sold without tools or accessoiresApprox. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,450 mm, weight approx.: 1,200 kg

Four-way planer model P 23, five-shaft machine with groove bed, Shaft arrangement down/right/left/up/down, Number of planer shafts: 5 Planing height max.: 120 mm Planing width max.: 230 mm Dressing table length: 2,000 mm Feed power: 2.2 kW Feed speed: 5 - 24 m/min Speed: 6,000 rpm Spindle diameter: 40 mm Soundproofing hood good neat condition, year of construction 94, extraction distributor