cepilladoras usadas para la venta

Capacity: 220 x 120 mm.Spindles: 5Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kWSpindle diameter: 40 mmMotorised thickness adjustment, motor 1,5 kW digital displayInfeed table1700 mm longSiko reading on the shaft positioningProtective hood with electrical contactExtension 5 x 140 mm ... más información

SPECIFICATIONS: Pre-planer machine inlet mm: 2000 Number of spindles: 6 (5 + 1 universal) Spindle Configuration: I Bottom: CW 5.5 II - III right-left: week 7.5 IV top: week 5.5 V Bottom: KW 5.5 VI Universal spindle: KW 5.5 Cardan shaft drive Variable speed drive KW: 3.0 Revolutions per minute: 6,000 Max. working width mm: 230 Max. working height mm: 150 Spindle diameter: mm 40 Central lubrication inclusive: - Soundproof booth -Tools CE Marking

The machine contains the components from the large-scale series of the powerful WEINIG class Working width 20 – 260 mm / carpentry version Working height 8 – 160 mm 5 working spindles DM 40 mm Long inlet work table - 2000 mm 5 working spindles, bottom 5.5 kW, left + right 7.5 kW, top 7.5 kW, plaster bottom 11 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 – 24 m/min. ATS system: Up to 98 workpiece dimensions can be programmed and called up at the touch of a button Left and upper spindle drive auto. in position Machine in CE design Built in 1998 Without editing tools

Thickness planer, Thickness T 44 from Martin with Tersa shaft Planing width max. 630mm Planing height from approx. 3 to 250mm electrically adjustable, reading via LED display in 1/10mm accuracy, fine adjustment via tip button Drive motor 5.5kW Automatic engine brake 4-knife shaft Tersa with new knives 2 Feed speed 6m/min and 12m/min Rubberized infeed roller and rubberized outfeed roller renewed Articulated pressure beam Planed thicknessing table guided on 4 threaded spindles and guides for optimal stability Low-noise design with soundproof hood Suction nozzle 160mm Emergency stop front and rear Original paintwork, only partially reworked Carpet in original condition V-belt renewed Infeed and pull-out rollers renewed New knives CE Mark Dimensions approx. 1300 x 1150 x 1150mm (LxWxH). Weight approx. 1250kg. The machine can be demonstrated by appointment at our s ...

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

– after technical inspection – year of production 1999 – chrome tops – electronic height setting TECHNICAL PARAMETERS: planing width 230 mm planing height 130 mm electric adjustment of the left head electric adjustment of the upper head electronic height adjustment five steel top rollers one top rubber roller spindle diameter 40 mm 1 bottom spindle 5.5 kW 2 right spindle 3 left spindle 7.5 kW 4 upper spindle 7.5 kW tool diameters 160 and 180 mm pneumatic clamps feed on cardan shafts smoothly adjustable feed 6-20 m/min feed motor power 2.2 kW chrome tops pre-table top length 1980 mm connection diameter 4 x 130 mm dimensions of the machine (L/W/H) 340 / 190 / 200 cm weight 2200 kg

– German production – year of production 1999 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm spindle diameter 40 mm feed 10 m/min feed motor power 3 x 0.85 kW first bottom spindle 4 kW second right spindle third left spindle 7.5 kW fourth top spindle 5.5 kW .max. diameter of horizontal / vertical tools 140 mm / 180 mm two upper steel pulling rollers one top roller rubber pulling one rubber roller in the countertop central lubrication of the table top table top length 2465 mm pneumatic clamps upper head shoe connection diameter 250 mm dimensions of the machine (L/W/H) 360 / 140 / 175 cm weight ~ 1000 kg

4-sided planer and roll forming machine with 5 shafts Finished dimensions 240 x 170  ... más información

Specifications/Equipment: Planing width 410 mm Chip removal max. 8 mm Table length 2,850 mm TERSA knife shaft with 4 blades Knife shaft speed 5000 rpm SUVAmatic planer shaft protection cover electr. Feed table height adjustment Dispensing table with hollow and pointed joint adjustment Stop can be tilted up to 45° Motor power 4 kW Suction nozzle Ø 160 mm Space requirement 2,850 x 1,950 x 1,027 mm Weight approx. 870 kg All information is subject to the actual equipment

TRADE Plane Model CM500  ... más información

- year of manufacture 2000 -DTR - electronic height and width adjustment - the ability to save fixed parameters TECHNICAL PARAMETERS: planing width 230 mm planing height 140 mm spindle diameter 40 mm 1 bottom spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle 5.5 kW 4 upper spindle 7.5 kW 5 bottom spindle 7.5 kW feed smoothly adjustable feed motor power 3 kW electronic height adjustment electronic adjustment of the left head feed on cardan shafts five upper steel pull rollers two pulling rollers rubber top one role in the countertop pulling pneumatic material pressure minimum material length 400 mm pre-table length 2000 mm chrome tables connection diameter 5 x 125 mm Machine dimensions (L / W / H) 370 / 200 / 190 cm weight ~ 3000 kg

Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th s ...

WEINIG Hydromat H23 LINE, S/N 89533 Package chain conveyor with 5 chains approx. 2,700 x 4,800 mm WEINIG infeed transverse transport HighMech E-1, with 7 flat chains approx. 2000 x 4200 mm WEINIG Hydraulic Roller Accelerator 814 Short infeed table with heavy 4-roller feeder WEINIG Outlet HighMech A-5 Pull-out hinge approx. 2,000 mm x 250 mm Transverse transport with 7-fold cam chain 4,200 mm Transfer to 7-fold flat belt transport Scissor lift with driven chain support Automatic planer with reinforced KASCHWIG soundproof booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed infinitely variable 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 15.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle top 15.0 KW • 5th spindle bottom 11.0 KW • 6th s ...

Flush planer SCM model F410N : - 410x2610mm tops - shaft D.120mm with 4 knives - control panel on rear pine cone Machine according to CE standards.  ... más información

Kölle thickness planer DH 63 Product name: Thickness planer Type: DH 63 Manufacturer: Kölle Machine number: 888 Year of construction: 2000 Condition: used technical details: • Planing width: 630 mm • min. planing height: 4 mm • planing height: 225 mm • Largest chip depth: 8 mm • Length of the thickness table: 1,000 mm • Shortest workpiece length: 260 mm • Diameter of the knife shaft: 125 mm • Speed of the knife shaft: 5,000 rpm • Number of planing knives: 4 pieces • Feed speeds: 4/6/12 m/min • Weight: approx. 1,020 kg • Electronic positioning control e.g. adjustment of the thickness table • Sliding roller in the table Electrical equipment: • Voltage: 400 V • Power knife shaft motor: 7.5 kW • Power feed motor: 0.75 kW • Power motor for thickness table adjustment: 0.18 kW Suction: • Diameter suction nozzle: 160 ...

I am selling an industrial planer LEDINEK ROTOLES 300 D. Built in 2000. Max. working width 300mm Max. working height 2-150mm Max. material take-off 8mm Rotating Shaft 48 Knife Feed speed 10-25 m/min. Motorized thickness adjustment with digital display. Diameter of the extraction hood 200 mm (30m/sec. required) Main spindle motor 7.5 KW. Feed motor 3.0 KW. Total power 12 KW. Total weight 900kg. European product, manufactured in the EU, with CE certificate and instructions for use. Machine in stock in Kežmarok, Slovakia, possibility to test.

Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).  ... más información

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...

4-sided planer Fabr. Vinous Type U 23 E blue class YOC 2001 with 6 spindle + horizontal sawing unit 1 Sp. U-5,5 Kw 2-3 Sp. R/L 7.5 Kw 4 Sp.R 5,5 kw 5 Sp. Ø 7,5 Kw 6 Sp. U 5,5 Kw 7 horizontal sawing unit 2.2 kw (glazing bead saw) with button pressure yes-no Working width 20-230 mm Working height 8-120 mm Spindle 40 mm Feed rate 5-24 m/min 4 Kw Dressing table 2.5 m manuele waxilite pump two driven rollers in machine table