rectificadoras usadas para la venta

Manufacturer: Venyeskob, Type: Bürstenschleifmaschine, Year: 1985, Working widht mm: 1300, Through running hight max mm: 100, Diameter of brushes: ca.400, Number of rotations controlled: yes, Units mounted inclined: yes, Fast exchange device: yes, Through running hight max mm: 100, Axle-diameter: 60, Engine power - kW: ca.4, Vacuum belt: yes, Feeding speed continous adjustable: yes, Required space L x W x H mm: 3500X2500X2600, Year :1985

Used Oscillating Roll Grinding Machine Int. Art. Ref. m3476 Manafacture: Zimmermann Type FZ OZ Year of construction: 1985 2 speeds Table size approx. 1,080 x 620 mm Table height approx. 815 mm Swivel range 30/20° Weight approx. 500 kg Roll diameters 150, 200 & 250 mm Item location: 59425 Unna The machine can be viewed and tried out under power. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to make an intermediate sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / ware ...

Manufacturer: Johannsen, Type: T 92, Year: 1985, Sanding hight mm: 240, Table width mm: 800, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: ca.3, Travel range table mm: 800, Exhaust diameter mm: 180, Year :1985 ... más información

Belt/ozilierend swiveling Roll in the table  ... más información

usable grinding wheel outer Ø: 600 mm Table size: 470 x 950 mm Table tiltable down/up to: 45/30° Table height above corridor: 950 mm Grinding wheel speed: 940 rpm Grinding wheel drive: 380 V, 940/1140 rpm, 2.2/2.5 kW Weight: 237 kg  ... más información

equipped with: -2 milling units -1 long belt sanding unit -3 buffing units/profile grinding units  ... más información

Manufacturer: Hess, Type: Junior, Year: ca1987, Control: L/L, Software: yes, Barcode: 190, Monting of the machine: 4 - 150, Equipment of machine 2: 2, Double sided sanding line: 5 - 25, Steel roller: yes, Steel roller: yes, Belt 1 shoe unit: 5,5, Belt 1 combined unit: 5,5, Band 2 Kombiaggregat Walze/Schuh: 1, Band 2 Innenliegendes Drucklamellenband : yes, Band 2 Schleifbandgeschwindigkeit m/s : 280, Belt 2 pressure segment belt: yes, Belt 2 synchronous and reverse run: yes, Band 3 Kombiaggregat Walze/Schuh: yes, Year :ca1987

Motor output: 3 kWTable dimensions: 350 x 750 mmgrinding band dimension: 150 x 2.280 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS  ... más información

Long belt sanding machine, veneer sanding machine, Specifications: Table width 2800 mm Grinding width 2500 mm Table depth approx. 2000 mm Sanding belt length 9500 mm Pressure lamellar belt length 10 mm x 7750 mm Sanding belt dimensions 150 mm x 9500 mm Belt speed 25 + 12.5 m/s Suitable for intermediate paint sanding Workpiece height 6 - 220 mm Grinding engine power 24 kW Total power 27 kW Machine dimensions approx. L 5000 x W 2300 x H 2400 mm Space requirement of the machine in width is 3500 mm Machine weight 2600 kg TOP condition, technical documentation, sanding belt.

Manufacturer: Heesemann, Type: UKP 22, Year: 1989, Control: Hand, Sanding belt hight: 60, Table size mm: 2100, Roller diameter D mm: 10-60, Table stop mm: 60, Sanding area (beam): 5-25, Sanding belt length max mm: yes, Feeding speed min-max m/min: 6, Milling units: yes, Controllable slewable: no, Laquer sanding: ca.2, Main engine kW: yes, Controllable slewable: no, Laquer sanding: ca.2, 1st sanding motor controlled and tiltable: yes, Controllable slewable: no, Laquer sanding: ca.2, 2nd sanding motor controlled and tiltable: yes, Controllable slewable: no, Laquer sanding: ca.2, Frequency controlled: yes, Power kW: yes, Length front table mm: EGZ 2 Stück, Control panel on top: yes, Belt clamping pneumatically: inkl.2 EG Radienschleifgeräte und ein Bürstenmotor/Bürstenschleifmotor mit Scotch Walze/Länge Maschine 8400 mm, Year :1989

Band width: 150mm; Veneer grinding device: yes; Oscillation: yes; Abrasive rollers for curves: 1; Swivel table: yes; Table size: Suction connection: 120mm; Motor power: 1.8kW; Machine length: 1700mm; Machine width: 900mm; Weight: 450kg; ... más información

Hey Dear Ladies and Gentlemen, Dear Sirs, Thank you for your enquiry. price 2.690.- EURO EXW Finland We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3.4 kW motor Swivelling table Mechanical swivelling Additional support and "round" sanding discs Suction device Movable platform with wheels Weight 250 kg Technical specifications subject to change Edge sander LASM Volpato LBK 160 SN 349177 Year 1989 Manufacturer: LASM Volpato Italy Vertical Oscillating Grinding Machine 3.4 kW motor Swivel table Mechanical swivel Addit ...

Vollmer CHHF 21 H - Machine for single-sided grinding Year of construction: 1989 S/N 907 Make: Vollmer Germany in good working condition The technical data of the CHHF 21H at a glance: Circular saw blades Outer diameter 80 to 700 mm Bore diameter 20 to 105 mm Tooth pitch from 8 mm Hook angle up to 30° Radial clearance angle -7° to +3° Tangential clearance angle up to 5° Connected load approx. 0.52 kW Weight approx. 85 kg Dimensions: 70 x 50 x 80 cm Cisei8tfrg This machine has been specially designed for the repair of lack of carbide teeth. Newly inserted tips are used in the existing teeth. With this tabletop version, VOLLMER offers a a particularly economical, space-saving solution. The CHHF 21 H works according to the wet grinding process. During the grinding process, the grinding unit manually moved over the tooth flanks, with the saw blade Saw blade ...

Manufacturer: Heesemann, Type: Hochglanzpolierautomat BA 2, Year: 1989, Belt length mm: ca.9500, Sanding hight mm: ca.200, Table width mm: 1350, Table length: 2530, Sanding belt engine kW: 11/15, Fan for chips: yes, 2 rotary directions: yes, Stop straightedge: yes, Presentation possible: yes, FREE TEXT: Saugspann Anlage/Bandstrahleinrichtung/ Frequenzregelung Schleifband/Schaltschrank Neu, Year :1989

Band dimensions: 150x7800mm, grinding width: 1000mm, power: 6.6kW, length: 3950mm, width: 2300mm, weight: 900kg. ... más información

Manufacturer: Technolegno, Year: 1989, Program: SPS, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Sanding hight mm: 40/60, Schleifaggregate links : 3 + 1+ 2, Surface sanding units: 4, Profile sanding units: 1, Sanding unit discs: Kopierschleifaggragt, Monting of the machine: 4 Langband<CRLF>1 Bürste<CRLF>1 Kopierschleiffen, Unit 1 tiltable: yes, Unit 1 Kw: 0,75, Unit 2 slewable: yes, Unit 2 Kw: 0,75, Unit 3 slewable: yes, Unit 3 Kw: 0,75, Unit 4 slewable: yes, Unit 4 Kw: 0,75, Unit 5 slewable: no, Number of frequency controlt belts: über Getrieb, Sanding belt speeds m/min: 3-18 m/sec, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 1, Wight approx. kg: 4000, FREE TEXT: Vorsch von 3-18 Meter, Year :1989

Technical data/equipment: - Working width 1350 mm, grinding from above, with 2 grinding units: Contact roller unit 15 kW with calibration device and height-adjustable contact roller 65° Shore Combined contact roller pressure shoe unit, drive power 11 kW, with higher adjustable contact roller 85° Shore and through the workpiece electr.pneum. controlled air cushion pressure shoe - Sanding belt dimensions W x L 1360 x 1,900 mm - Cleaning brush in the spout - Belt feed device, speed 3-15 m/min - Roller table in the inlet - Display of workpiece thickness - Air requirement machine control 60 NL/min - Suction nozzle Ø 3 x 200 mm - Extraction capacity 7,600 - 8,200 m³/h, Machine resistance 800 Pa - Total connection value 28 kW (380 V, 50 Hz) - autom. Star-triangle start-up - Braking device - pneum. Strip tension - optical airless belt control - pneum. spring-loaded centre ...

Wide belt Sander Brand: Bütfering Model: AWS 3 Year of construction: 1989 Working width: 1350 mm 1 x Calibration roller 1 x Combi unit ( roller + grinding shoe ) 1 x Sanding shoe 1 x Cleaning brush Location of the machine: Customer location / Abroad  ... más información

Manufacturer: Heesemann, Type: FGA 6, Year: 1989, Monting of the machine: L, Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Rollers: no, Cross sanding unit: no, Shoe unit: yes, Shoe unit: yes, Elektronische Tastung mm: yes, Power belt 1 in kW: 11, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: 40, Brushing unit: yes, Year :1989