- (1)
- Aglomeradores (5)
- Cintas transportadoras (8)
- Fresas de corte por agua (7)
- Fresas para espuma (1)
- Impresoras 3D (9)
- Instalaciones de etiquetado (5)
- Instalaciones de lavado y secado (6)
- Instalaciones de recubrimiento (3)
- Instalaciones de recubrimiento y de impresión (2)
- Instalaciones de trituradoras (1)
- Laminadores para laboratorio (2)
- Líneas de calandrado (7)
- Maquinas cortadoras de rollos (6)
- Máquinas de estampado (1)
- Máquinas de piezas de moldeo (3)
- Máquinas de reciclaje de plásticos (2)
- Máquinas de sellado de bolsas (8)
- Máquinas estampadoras (6)
- Mezcladores de alta temperatura (9)
- Mezcladores de enfriado (2)
- Sierras de PVC (5)
- Sierras para abalorios (1)
- Taladradoras de punto de centrado (1)
- más
- 3D Systems (16)
- ADAMSON (1)
- ALPHATEC (1)
- ALPINE (1)
- ALUMA (1)
- AMBOSS LANGBEIN (1)
- AMIS (1)
- AMIS ZERMA (1)
- AMUTEC (1)
- Ankele (3)
- Arburg (2)
- ARCA SISTEMI SRL (1)
- AROMAZA (1)
- AUTOMATIC MACHINE FOR BAG PRODUCTION (1)
- BAKKER MAGNETICS (1)
- BARRATI (2)
- Battenfeld (2)
- BCN3D (2)
- BD PLAST (1)
- BECKER (1)
- BEFAMA (1)
- BELLAFORM (1)
- Berstorff (5)
- BIGREP (1)
- BIZETA (1)
- BORA (4)
- BRABENDER (1)
- BRANSON (1)
- BRANSON ULTRASONIDOS (1)
- Buzuluk (2)
- CACCIA (1)
- CASTORE (1)
- CAVALLERI (1)
- CDM ENGINEERING (1)
- CHALLENGER (1)
- China (5)
- Class Engineering (2)
- COEMTER (2)
- COEMTER BAG MAKING MACHINE (1)
- COMAX (1)
- COMBO MACHINERY (1)
- COMBO MACINERY (1)
- COMETSA (1)
- COMEXI (1)
- CONCEPT LASER (1)
- CONPRO (1)
- COSMOS (1)
- COSTARELLI (1)
- CUSTOM MADE (1)
- Dalgakiran (2)
- DEGA (1)
- DEKUMED (1)
- DELTA (1)
- Digicolor (2)
- DIVERSE (1)
- DOLOUETS (1)
- DR. COLLIN (1)
- DREHER (1)
- DROSBACH (1)
- DSYSTEMS (1)
- DYEMANSION (1)
- ECORIN (1)
- ELNIK (1)
- Elumatec (7)
- ELWA (1)
- EMMEGI (1)
- ENSUTEC (1)
- ENVISIONTEC (1)
- EOS (4)
- ERMAFA RECYCLING (1)
- ESSICCATORE GRANPLAST (1)
- Eurochiller (2)
- EUROPEAN (1)
- EUROTECNO (1)
- F,E,B,A (1)
- FAMPA (1)
- FARREL (1)
- FARSOON (2)
- FAS (1)
- FORMLABS (1)
- FORWARD MACHINERY TAIWAN (1)
- FRANK (1)
- FRäNKISCHE ROHRWERKE (1)
- GERMANPLAST (2)
- GESTER (3)
- GETECHA (1)
- GEVO (4)
- Glintstar (3)
- GRAF (3)
- GRANPLAST (1)
- GREEN BOX (1)
- GUIX (1)
- GUR IS MAKINA (1)
- GUSBI (1)
- HAFFNER (3)
- HAITIAN (1)
- HAMOS (1)
- HAN S LASER (2)
- HEMA (1)
- HEMINGSTONE (1)
- ... más
subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 308)
Año de construcción: 2005
usado
Injection molding machine Cosmos WG-800C Production - China. Issue 2005. It is in working condition. Voltage - 380W, frequency - 50hz screw diameter 100 mm, injection volume 3600 cm. cube ... más información
Año de construcción: 2005
usado
Output capacity 1000 kg/h Running hours From year 2005 24/7 40.1896.005 Product pipeline 40.1896.006 Spinning 40.1896.007 Quench air duct 40.1896.008 Air ducts, spinning tube 40.1896.009 Quench air duct spin finish unit 40.1896.046 Fiber draw – off wall 40.1896.049 Feed roller assembly 40.4896.050 Sunflower wheel
Año de construcción: 2005
usado
Used lining machine PMC 250. Profile 916. Produced in SACMI Italy. Perfect working condition. ... más información
Año de construcción: 2005
usado
Turbo mixer brand: TPM, stainless steel, capacity: 400 liters, 2-speed engine: 1500/3000 rpm, power: 60/72 kW, stainless steel chiller, brand: TPM, capacity: 1000 liters, with double chamber for cooling. Reduction motor: 10 hp. Year 2005. ... más información
Año de construcción: 2006
usado
T-shirt bag making machine HEMINGSTONE HM-800ST2 Two lines with hot knife and side gusseting device Can run also with two separate rolls already with side gussets from the extruder Maximum bag width 2 x 330 mm Maximum bag length 700 mm. Maximum film width 1100 mm Maximum production speed 200 cycles/min.
Año de construcción: 2006
usado
Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm ... más información
Año de construcción: 2006
usado
Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm ... más información
Año de construcción: 2006
usado
Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm ... más información
Año de construcción: 2006
usado
Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum
Año de construcción: 2006
usado
VAN DAM 565 mug printer 6 colors 8.8 kW engine Cup rim diameter 50-135MM Speed ââup to 400 cups per minute, depending on the format ... más información
Año de construcción: 2007
usado
n. 6 pre-machine tanks with saim brand agitator Saim Fe 360 ââexpanded polyurethane production equipment ... más información
Año de construcción: 2007
usado
1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).
Año de construcción: 2007
usado
Description Machine for thermosetting equipped with heating and magnetic platen Dimension platen: 400x400 CE certificate Weight: 3600kg ... más información
Año de construcción: 2007
usado
ROTOX SZK 502 double head welding machine was manufactured in Germany in 2007. The machine designed to weld two 90° angle joints in one working cycle, achieves high process stability and optimum temperature of the welding plates and stop blades made of hardened stainless steel. Hollow PVC bar sections with a maximum length of 2550 mm are welded on a stable structure by two welding heads made of high-quality cast aluminium. The ROTOX double head welding machine weighs 550 kg. Technical specifications of ROTOX welding machine SZK 502 - machined parts: hollow PVC bar sections - maximum section length: 2550 mm - minimum section length: 440 mm - maximum section height: 160 mm - minimum section height: 30 mm - welding angle: 90° - welding stitch limitation: 2 mm - workpiece tensioning: pneumatic - screw spanner with hexagon socket 3 mm - jaw spanner 10/13 mm - control cabinet s ...
Año de construcción: 2007
usado
Year: 2007 - technically efficient, ready to work - after full service - flow limitation: 0.2 mm - maximum welding dimension: 2400 mm - support arms ... más información
Año de construcción: 2007
usado
Horizontal wire saw for profiling of EPS boards Programming of CNC cutting image Application for EPS, XPS, PUR rigid foams Plate length: 1000 mm Board width: 500 mm Thickness: 80-200 mm Interpretation for approximately 17 m ³ production quantity per hour installed cutting image: hacking folding Visits by appointment at any time. Other machines and components for the production and processing of foams are available.
Año de construcción: 2007
usado
Year: 2007 - technically efficient, ready to work – after full service - engine: 2x 0.45 kW - disc: 2x 200 mm - pneumatic feed - vertical clamps ... más información
Año de construcción: 2007
usado
CUP LABELING / LABELER BLINK RM 50 (FOUR OR TWO CUP / SIDE AND GROUND) M. No.: 950136 Voltage: 380 V // 50 Hz // 6A ... más información
Año de construcción: 2007
usado
Año de construcción: 2007
usado
JON WAI 230HPI23H injection molding machine Production - Taiwan. Issue 11.2007. Worker. Locking force 230 tons, Heater - 12,1 Kw horse power 60 HP ... más información