Fabricante:
(Categoría: 503)
Rotor Dia. x W: 1.000 x 700mm - Included: 55 kW Electrical motor, Inlet, Hydraulic pump with control panel, 500 KG Service Crane. Many spare-parts in stock! Crusher can be sandblasted and painted. ... más información
MO.DI.TEC_GTwin Plus ABS SN: 95000004589 Machine in great condition, most of time not in use. The MO-DI-TEC Goliath range of low-speed granulators are specially adapted for beside press recycling of sprues, parts. They produces large quantities of regrind high quality without affecting the materials’ molecular structure. Granulate may be fed directly back into processes, saving time and material. The Goliath TWIN Plus assures an optimal regrind of a much more important output thanks to a wider cutting chamber and 2 gearmotors (2x1,8 kW or 2x2,2 kW optional). Models feature a unique tooth design facilitates both trapezoidal and helical cutting, and a resistant steel coating protects the teeth against wear from abrasive materials. Ergonomic grinder Reversible combs Both helical and trapezoidal granulometry Soundproof steel hopper Easy cleaning and maintenance IMD dete ...
Pre-shredder for garbage, waste wood, green waste, roots, commercial waste etc., five travel drives, auxiliary hydraulics, SPECIAL FEATURE: Engine, hydraulic system and electrics new after fire damage, service and tools new or as good as new. ... más información
the machine with two motors each 5.5 kw and blades 40 mm 2 hooks machine complete with hopper and stood and as well as a new control panel ... más información
Used and ready to use Crusher Mercodor ZM 2 year 2012 Mercodor paper shredder with special paper knives 500 x 440 mm and knives 14 mm 2 hooks power 11 kw ... más información
Balemaster HL 160 – Air shredder system with feed belt, built in 2012 Specifications Manufacturer: Balemaster Europe Type: HL 160-Air Year of construction: 2012 Motor: 22 kW Feed width: 1600 mm Belt speed: 15 m/min Throughput: approx. 3.5 t/h Weight: approx. 4000 kg Material: corrugated cardboard, paper, cardboard boxes
Specifications Cutting width: 7.5 x 40-80mm the safety level DIN 66399: P-3 O-2 T-3 E-2 Productivity: 2500 kg/h Year of construction: 2012 ... más información
Technical data shredder:Manufacturer Lindner Recyclingtech GmbHType Micromat 2000Year of construction 2012Operating hours 5,842 hours, as of MarchDrive power 160 kWFilling opening 2,790 x 2,405 mmFilling height 2,594 mmCutting chamber volume 4.5 m³Number of sieve sheets 4 piecesDischarge width 2,225 mmInput density 160 up to 200 kg/m³Input granulate
Doppstadt DW 3060 Büffel - Year of construction 2012 - Running hours 5232 - Engine Mercedes Benz overhauled - AD Blue - Hydraulic drive (self drive) -Remote control - Overbelt magnet Machine is overhauled and immediately available ... más información
XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition! ... más información
Shredder HSM Powerline FA 500.3, for large quantities Specifications Manufacturer: HSM Type: Powerline FA 500.3 Year of construction: 2013 Drive power: 7.5 kW Input width: 500 mm Cutting width: 3.9 x 40 mm Security level (DIN 66399 / ISO / IEC 21964): E-3 / F1 / O-3 / P-4 / T-4 Cutting capacity in 80g/m² sheet: 180-200 Hopper volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg
Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.
Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available
2 shaft shredders with a rotor width of 1500 mm Diesel engine from CAT ... más información
2- Shaft shredder for pre-crushing sperm, beams, etc. with overbelt magnet Diesel engine from CAT ... más información
- Shredder Metso M&J 4000-12 - 2 x 12 knives - 2 x 132 kW - Built in 2013 - only 12,500 hours - with second cutting table - Incl. power pack and control cabinet - Shredder Metso M&J 4000-12 - 2 x 12 knives - 2 x 132 kW - year of manufacture 2013 - only 12 500 hours - with second cutting table - with power pack
- diesel engine CAT C7.1 Tier 4i - approx. 205 kW / 275 HP - shafts: 7/7 discs with 5 knives per discs and breaker bar with combs (reconditioned) - Mobile Hook Lift Frame - Permanent - Overband magnet - water sprinkling system - Remote control ... más información
used single-shaft shredder Manufacturer: LINDNER Type: VEGA 1100 L Year of construction: 2013 specifications: Filling volume: 1.7 m³ Working opening: 1,100 x 1,800 mm Rotor length: 1,090 mm Rotor flight circle: 434 mm Rotor speed: 100 rpm. Drive power: 45 kW Pneumatic pusher: 6 bar Weight: approx. 6,000 kg
We hereby request the following machines and equipment as a package:, Leimbach HS 1400/8000-2500-6/1-L, Brand: Leimbach, Model: HS 1400/8000-2500, Dimensions in mm (LxWxH): approx. 26400 x 10750 x 5950, Year of construction: 2014, Operating hours: 11,000 hours, Weight: approx. 390 t, Technical data:, Operating pressure: 350/315 bar, Shear force: 1400 kN, Cutting width: 950mm, Blade opening: 850mm, Side basket height: 800 mm, Cut per minute: approx.4-6, Pre-press bed:, Case length: 8000 mm, Filling width: 2500 mm, Clear bed height: 1800 mm, Sennebogen 850 E, Crawler R 70 / 490 Material Handling Machine:, Fire: Sennebogen, Model: 850 E crawler R70/490 special., Cab adjustment: E270 hydraulically elevating, Technical data:, Engine Power: 250kW, 400V, 50Hz., Service weight: approx. 63 t., Equipment: K 21, Operating hours: 9800 h, Year of construction: 2014, Lift capacity at 20 m reach: 5.9 t ...