máquinas para alimentos básicos y alimentos para el ganado usadas para la venta

TT MIDI 250ml, 330 ml, 500 ml TT BASE 500ml, 750 ml, 1000 ml. Running hours-31151. We operated by BASE from 2013.03…2018.11 Running hours-27145. We operated by MIDI from 2015.08…2018.11  ... más información

Boiler capacity: min. 60 l, max. 300 l, total 400 l Total weight: approx. 1800 kg Availability: as of now Condition: functional, well-maintained Operating hours as of 2/22/24: 1016 Electrical values: 400 V, 50 Hz, 26.6 kW Control voltage: DC 24 V  ... más información

Continuous mixer in stainless steel As good as new Motor drive 7.5 KW Capacity up to 15 t/h Liquid addition up to 3%  ... más información

pressure:300 tpassage width:600 mmstroke:500 mmWeight of machine approx.:8,5 tdimensions:ca. 2275 x 1650 x 4050 mmReturn Capacity:30 tEngine Output:30 kWMax Working height:800 mmApproaching Speed max. :10 mm/secPressure Speed:10 mm/secTravel:500 mmRam plate:600 x 600 mmTable size:600 x 600 mmTable height above ground level (approx.):850 mmOil Tank Capacity:350 lOil cooling (electric):1,5 kW (max)ejector stroke:250 mmpressure of ejector:50 tMaintenance Balcony:2.800 ?Drip pan to prevent oil spil:2.800 ?Upper and lower tooling (for 8kgs salt stone):11.000 ?automatic filling with 500 kg depot:58.000 ?speed increase to 80 mm/sec:19.000 every additional meter conveyor belt:850 ?Light barriers front and back:6.800 ?Side trim:4.200 ?7m roller coaster-for salt stone transport and interim storage:12.900 ?Faster Version with approach and working speed at 60mm/sec ist available on request.Price (ex ...

Atomo 3.0, max pressure 600 bar, Flow Rate 150 l / h, two-stage homogenizing valve Suitable for various foods Demonstration device, like new The new price is around Euro 32.000  ... más información

Stainless steel For continuous mixing of liquid and solid masses Quickly changeable agitators and mixers Double-walled, heatable housing Quick-dismountable cover  ... más información

pressure:150 tstroke:500 mmWeight of machine approx.:ca. 8,5 tdimensions:1200x1800x3100 mmEngine Output:10 kWMax Working height:1000 mmApproaching Speed max. :9,9 mm/secPressure Speed:100t = 9,9 bis 0 mm/secTable height above ground level (approx.):1000 mm:Schmiernippel column diameter:230 verchromt mmReturn Speed:25 mm/sec:500 ldemand for oil:ca 400 lMaintenance Balcony:5800 ?:3900 ?:2800 ?:4800 ?:29000 ?:8200 ?Faster Version with approach and working speed at 60mm/sec ist available on request.Price (excl. options): 117.500,--

pressure:400 tpassage width:600 mmstroke:400 mmWeight of machine approx.:14 tdimensions:2380 x 1680 x 3580 mmEngine Output:36 kWMax Working height:750 mmApproaching Speed max. :10 mm/secPressure Speed:10 mm/seccolumn diameter:230 mmReturn Capacity:40 tspeed rapid traverse:25 mm/secTravel:500 mmOil Tank Capacity:600 lOil Cooling:1,5 kW:6 mMonitor:WEG 12 Zoll:6800 ?:4200 ?Speed increase to 80 mm/sec.:19000 ?every additional meter conveyor belt:850 ?Faster Version with approach and working speed at 60mm/sec ist available on request.Price (excl. options): 117.500,--

For sale is a functioning pellet production line including controls. The plant is suitable for pelletizing agricultural raw materials (straw/hay/alfalfa etc.) and has an output of 1000-1600 kg/hour depending on the material. The complete system has approx. 800 operating hours The production line is composed of: cjffolp2bh Byfo0wxd Bale breaker 37 KW + bale conveyor table 10m and Hammer mill 75 KW Zyklon + Rotary Valve + Buffer Tank Scheuch dust filter house with control system and a capacity of 20,000m3/h including discharge for big bags, 2 Koller ring matrices pellet mill 110 KW with aut. Central lubrication. In the associated conditioner, the moisture content of the material is automatically controlled by means of a dosing pump and mist nozzle as well as a microwave sensor from the Envea brand. Pellet cooler with level sensors and automatic emptying. Vibrating scr ...

Revic RX450 Twin shaft paddle mixer Serial: RX1321 2021, Stainless twin shaft paddle mixer, Variable speed, forward and reverse, 450L capacity, with stainless lid, comes with tote bin hoist which mounts onto the side of machine, 3Ph  ... más información

Niro-tech RX-150 single shaft paddle mixer, This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity.

Stock# UG6361 Used stainless steel double cone vacuum dryer blender made in China, type SYZG-50. Contact parts made of stainless steel AISI 316L. Total capacity of the chamber is 50 l. Working volume is up to 25 l and the load weight ranges from 10 kg to 25 kg. Drying chamber is designed to operate at a pressure up to -1 bar and is equipped with an internal vacuum pipe. The drum is covered with 2 kW electric heating mats and is insulated with wool and is covered with SS AISI 304 on the outside. Inlet and outlet are equipped with lockable covers. Drum working speed up to 6 rpm. The chamber is mounted on frame made of stainless steel. Device is equipped with an local electric control panel and a vacuum pump with a water ring. Overall dimensions: length 1500 mm, width 1250 mm, height 750 mm, weight 400 kg.

Stock# UG6345 Unused atmospheric cabinet dryer by Airflow Premier Industrial Oven (UK). Chamber construction mild steel. Inside dimensions of drying chamber: W 3250 mm x D 1850 mm x H 2050 mm. Working temperature range up to 60C. Dryer is equipped with 2.2 kW centrifugal fan, whch can give air circullation up to 4.2 air change per minute. Heating - electric - 15 x el heaters each with power 3 kW. Outside dimensions: W 3500 mm x H 2900 mm x D 2200 mm. Machine has local control panel.

True color sorter with 2 RGB cameras and 2 NIR cameras, working width 1 chute with 270 mm, for grain 2-5 t/h, sunflower seeds up to 1 t/h, mustard up to 0.7 t/h  ... más información

PVS 125 Hi micro-cut Feinstzerkleinerer drive 15 KW Produkleistung 300 to 2000 kg or litres an hour depending on the machine can by the fineness of the products directly at the outlet of cooking equipment or tilting boiling pans are connected  ... más información

Voran RM2.2 Centrifugal mill Stainless chute, 2.2Kw, heavy duty centrifugal mill, Up to 1000Kgs per hour, 3Ph  ... más información

Mixing volume: 900 liters Year of manufacture: 2023 / New machine / Stock machine CE mark: yes 2 paddle shafts Front outlet with pneumatic flap control pneumatic protective cover with safety shut-off incl. mast loading for 200 litre cutter wagon Infinitely variable mixing speed adjustment Mixing time preset Voltage: 400 V / 50 Hz. / 3 phases Connected load: 11 kW Control Voltage: 24V DC Frequency converter / touch control: Mitsubishi approx. dimensions in mm with load Latitude: 2.130 Length: 2.200 Height: 2,750

Demonstration model in the showroom 24 months warranty Advantages: + Solid construction + Shell, middle rod and spiral made of stainless steel + Drive with two motors (spiral & boiler) + Flour dust hood closes gently with dampers, with automatic switch-off + mobile machine, on swivel wheels, with fixed boiler + Dirt protection cover for adjustable feet + short kneading time with excellent results + Switch for manual or automatic operation + 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + fast spare parts supply within 1-2 working days Program control, included in the price: - Panel with simple program control - Up to 99 different mixing/kneading programs can be stored Specifications: - Flour capacity: 10 - 120 kg - Dough capacity: 15 - 200 kg - Boiler volume: approx. 320 litres - Ø outer edge of the boiler: 970 mm - Motor power: 13.5 kW ( ...

Berief Bratt pan Serial: 7228 Stainless, 130l bratt pan, thermo oil, up to 260'C, manual wheel to discharge, with digital controls and timer, 3Ph  ... más información

MDDK 1000 1250.250  ... más información