subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 109)
Two multiple drawing machine Breitenbach Standard 4-III/8 are available, inlet/finished diameter: 3/ 0.8-1.5mm, drawing speed: 2-8m/s, weight: 11.17t, machine 2 is in the same design as machine 1, but set up for torsion free multiple drawing with twin pulleys, with documentation and spare pulleys, has been regularly maintained.
Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. ... más información
Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. ... más información
X-travel: 570mm, y-travel: 320mm, z-travel: 265mm, B-travel: +/-130°, C-travel: 360°, max. workpiece dimensions: 150x150x100mm, connected load: 40kVA, controls: Bosch Rexroth MTX, weight: 16t. ... más información
Two Bihler reels are available, without documentation, an inspection is possible. ... más información
There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min. ... más información
Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000.
Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.
X-travel: 500mm, y-travel: 430mm, z-travel: 350mm. ... más información
Eroding diameter: 100-420mm, max. roll length: 2500mm, roll weight: 8t, eroding length: 11mm, number of electrodes: 60, length: 5000mm, width: 2000mm, height: 1200mm, weight: 25t, with documentation, inspection is possible. ... más información
Max. coil diameter: 2000mm, max. coil width: 1500mm, max. coil weight: 5t, max. tensile force: 550kg, winding speed: 0-20m/min, connected load: 4kW, with pressure roller system and documentation, suitable for the production of stainless steel pipes, an inspection is possible. ... más información
X-travel: 800mm, y-travel: 600mm, z-travel: 400mm, U-travel: 60mm, V-travel: 60mm, workpiece dimensions: 1300x910x400mm, max. workpiece weight: 2.3t, dielectric capacity: 210l, connected load: 10kVA, length: 2550mm, width: 2350mm, height: 2200mm, weight: 4.84t, with generator, wire guide, protective cabin, documentation and other accessories, on-site inspection is possible.
Controls: AGIE PULS 30L, connected load: 11kVA, an inspection on site is possible. ... más información
System includes (1) CNC Transfer Machine Gnutti DF-12, connected load: 120kW, weight: 22t (2) Rotary Transfer System Mako RL10 (3) Washing Machine Mako WM3 MZ3, washing pressure: 80bar (4) Chip Shredder ZVD 600-J with VRF 900/6600 filter system, screw pump KTS, VRF vacuum rotary filter, chip conveyor (5) 5x Industrial Robots ABB, system length: 10,858mm, system width: 9798mm, with documentation, on-site inspection is possible.
Length: 1400mm, width: 1300mm, height: 1300mm, weight: 120kg, an inspection on site is possible. ... más información
Length: 2400mm, width: 2000mm, height: 2800mm, weight: 1.65t, an inspection on site is possible. ... más información
Loading area: 1300x1300mm, loading height: 1000mm, connected load: 9.2kW, length: 2670mm, width: 1840mm, height: 2375mm, weight: 1.2t, with documentation and accessories, an on-site inspection is possible. ... más información
System includes (1) Round Trough Vibrator Spaleck VA1451, working container volume: 140l, stretched container length: 2320mm, speed: 1460/min, container cross-section: 235mm, motor power: 1.3kW, space requirement: 2m², empty weight: 440kg, max. operating weight: 890kg, with two directions of rotation, operating hours: 149h. Operating weight: 890kg, with two directions of rotation, operating hours: 149h (2) Rotary Trough Dryer Spaleck VAT33, working container volume: 230l, heating power: 3.6/7.2kW, motor power: 1.6kW, empty weight: 700kg, max. operating weight: 1.2t, designed for automatic drying/separation process, optional pendulum flap for multiple workpiece circulation, with documentation, maintenance overdue, on-site inspection is possible.
Z-axis: 300mm, rotational speed: 0-10/min or variable, electrode diameter: 0-6mm, number of tools: 1, max. tool length: 300mm, connected load: 2.5kVA, weight: 100kg, operating hours: 250h, with various electrode holders and guides, cooling water pump, on-site inspection is possible. ... más información
System includes (1) 2x Ambrell Easyheat induction heaters (2) conveyor belt (3) Kelvin cooling system, weight: 235 kg. ... más información