máquinas talladoras de engranaje usadas para la venta

max. wheel diameter: 350 mmgear width: 160 mmmax. module: 10 min. module: 1 table load: 200 kgtotal power requirement: 8,5 kWweight of the machine ca.: 5900 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

max. wheel diameter: 400 mmgear width: 290 mmmax. module: 6 min. module: 0,5 weight: 4,6 tvoltage: 220/380 Vfrequency: 50 Hzdimensions: 3010 x 1800 x 2200 mmtotal power requirement: 17 kWWorking area:1. largest module to be milled 6 mm2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3Dimensions:1. Ø of the workpiece table 400 mm2. Ø of the table dimensions 80 mm3. diameter of the workpiece mandrel 36 mm4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm5. diameter of the milling cutter arbour 32, 406. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm7. drive cone for milling arbors MK 48. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifti ...

max. wheel diameter: 400 mmgear width: 290 mmmax. module: 6 min. module: 0,5 weight: 4,6 ttotal power requirement: 17 kWWorking area:1. largest module to be milled 6 mm2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3Dimensions:1. Ø of the workpiece table 400 mm2. Ø of the table dimensions 80 mm3. diameter of the workpiece mandrel 36 mm4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm5. diameter of the milling cutter arbour 32, 406. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm7. drive cone for milling arbors MK 48. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifting 100 mmThe data for this ad was created with ModulMWS - the software solu ...

control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden  ... más información

 ... más información

rolling capacity max.:2-20 tworkpiece diameter:100 mmtotal power requirement:2 x 8,5 kWweight of the machine ca.:11 tdimensions of the machine ca.:7,1 x 5,15 x 3,9 mDescription of the manufacturer:The ROLLEX® is more than an innovation offered by Profiroll in the field of Spline Rolling. This flexible machine type enables a rolling of splines onto most different types of shafts. The CNC-control combined with symmetric circular dies allow a manufacturing of splines with highest quality demands. Likewise the ROLLEX® is able to coldform profiles, threads and to perform finishing rolling due to its reliable Profile Rolling process.Circular Die Process circular dies for kinematic rolling with symmetric geometry this correlates to a rolling rack of infinite length a workpiece specific calibration phase achieving least tolerances is the result lowest changeover times due to compa ...

max. wheel diameter:80 mmmax. module:3 total power requirement:25-35 kWweight of the machine ca.:10 tworkpiece weight:15 kgworkpiece length - max.:-50+450 mmtable diameter:145 mmdiameter of hob:90 mmcutter length max.:220 mmhob turning speeds:1.000 U/min ... más información

rolling capacity max.:6,1 tworkpiece diameter:160 mmworkpiece length:25 mmtotal power requirement:14 kWweight of the machine ca.:4000 kgsdimensions of the machine ca.:2,5 x 2,5 x 2,1 mInternal rolling machine for transmission shift sleeves ... más información

max. wheel diameter:300 mmgear width:100 mmmax. module:5 workpiece turning speeds:0 - 1000 1/minwork piece - max.:1100 mmworkpiece clamping:auto. tension device number of spindle speeds:1000 1/min.spindle bearing diameter:100 mmdiameter of spindle flange:120 mmtailstock travel:80 mmweight of the machine ca.:3500 KGdimensions:1200 x 1450 x 2250 mmtotal power requirement:10 kVAThe Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility.

max. wheel diameter:200 mmgear width:250 mmmax. module:3 min. module:0,5 total power requirement:45 kWweight of the machine ca.:8,5 tdimensions of the machine ca.:4,4 x 2,4 x 2,7 mMachine out of prototype productionWithout automation ... más información

grinding wheel diameter:400 mmtotal power requirement:3 kWweight of the machine ca.:1,5 tdimensions of the machine ca.:1,5 x 1,4 x 1,3 mDressing Grinder for gears REISHAUER AMmax. width of grinding wheel 104 mmmax. dia. of grinding wheel 400 mmmax. module 7min. module 0,5pressure angle 10 - 30 °grinding worm dia. 270 - 400 mmwidth of grinding worm 62/84/104 mmgrinding worm turning speeds: at profiling 18/35/70 U/minelectrics - voltage/frequency 380 / 50 V/Hzlong. movement of crowning device 156 mm

Description: The Gleason-PFAUTER CNC Gear Shaping Machine P 1200 S offers an extensive working range and impressive technical data. With a nominal workpiece diameter of 1,200 mm for external and internal gears and a maximum workpiece diameter of 1,400 mm without a counterholder, it is extremely versatile. Control and Machine Number Control: SIEMENS Sinumerik 840D Machine number: 30 114 Working area Table diameter: 1200 mm Table bore: Ø 300 Workpiece specifications Max. orbital diameter: 1400 mm Nominal workpiece diameter (external and internal toothing): 1200 mm Nominal module max.: 16 mm Toothing width max.: 350 mm Shaping head specifications Max. stroke rate of shaping head: 80 min-1 Please take a look at the technical data and layout plans in the PDF file.max. wheel diameter: max. 1400 mm, module min./max.: max. 16, gear width: 350 mm, control: SIEMENS Sinumerik 840 D, tab ...

max. wheel diameter:150 mmmax. module:3 min. module:1 weight of the machine ca.:7,2 tdimensions of the machine ca.:2,44 x 1,43 x 2,46 mgrinding wheel diameter:206-275 mmBetriebsstunden: 99.235Incl. automatic loading system Felsomat, without filterNo Twist Control Grinding Option ... más información

max. wheel diameter:150 mmmax. module:3 min. module:1 weight of the machine ca.:7,2 tdimensions of the machine ca.:2,44 x 1,43 x 2,46 mgrinding wheel diameter:206-275 mmWorking hours 98.780Incl. automatic loading system FelsomatNo Twist Control Grinding Option ... más información

frequency:5.000-150.000 Hzweight of the machine ca.:10 tZ-axis:45-50 mmX-axis:pneumatisch working lenght:45-50 mmwith induction generator Sinak 100PH CN: 26811/100014 built in 2006 with belt filter press Heat exchanger and hydraulic unit  ... más información

max. wheel diameter:30-150 mmmax. module:6 total power requirement:36 kWweight of the machine ca.:11 tdimensions of the machine ca.:2,4 x 2,5 x 3,4 m ... más información

weight of the machine ca.:8 tdimensions of the machine ca.:2,95 x 1,6 x 2,36 mchucking diameter:250 mmswing diameter:265 mmx-travel:170 mmz-travel:200 mmspindle turning speed range:1.500 U/minspindle bearing diameter:100 mmPick-up machine ... más información

max. wheel diameter:1500 mmgear width:600 mmmax. module:16 min. module:1 total power requirement:38 kWweight of the machine ca.:18,7 tdimensions of the machine ca.:7,7 x 3,6 x 4,5 m mRetrofit in 2004, original from the 80s No internal hobbing device ... más información

Quality unchecked. ... más información

Dressing diameter:110 Planing width:9999 min. module:0,5 max. module:10 spindle turning speed range:2800 1/minpressure angle: 15 - 25 ° °run-out tolerance:0,001 mmWeight:22 kg ... más información