Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...

Support bracket Universal F 4,50m For concreting heights up to 4.00m The "Abstützbock Universal" is a simple and uncomplicated way to support formwork with attachments up to a maximum height of approx. 4.0 m. Features: ▪ Suitable for beam and frame formwork. ▪ Tensile forces are reliably transmitted by diagonal armatures. ▪ Adaptation to the different fresh concrete pressures Required is simple and economical – simply increase or decrease the distance between the load-bearing structure, frame. 17 pieces available EUR 721,00 per pcs.

Universal formwork Paschal Raster Universal formwork for foundations, walls, columns, beams, shafts, curves (polygons), landscaping construction, prefabricated elements. Versatile and flexible for use as manual and large-area formwork. Thanks to the modular principle, systemic formwork is very possible, even with complicated floor plans. The flat steel frames guarantee the robustness and durability of the formwork. Compatible with all PASCHAL systems. Connecting bolts as a universal fastener for all elements and accessories.

Painted ceiling supports 3.60m Steel construction supports with a red dip bath paint. Decoupling system - this enables a quick disarming of the support with little effort Foot reinforcement - by mounting a stronger pipe near the footplate Due to holes every 100 mm in the inner tube, the extension length varies between 50 and 500 cm Compatible with most of the accessories of other formwork Technical data: Inner and outer tube made of steel S235JR according to UNI EN 10219-1 / 2 concealed threads, step 8 mm, for adjusting the length Threaded pins directly on the outer tube, or welded, manufactured by rolling, i.e. without rejecting the material Lower plate available in flat or curved version Upper plate available in three versions (flat plate, with fixed cross or "U"-shaped) Highly resistant safety hook for fastening between inner and outer tube Hand-squeezing for safe con ...

Doka Tripod The tripods are in very good condition and can be used immediately. 780 pcs available  ... más información

MevaDec Lighter and more ergonomic: The new generation of the MevaDec impresses with its lower weight and high cleaning friendliness of all components as well as optimized handling properties – based on all the proven system advantages of the MevaDec. • Size and weight o Weight-optimized system for ergonomic and therefore efficient working o Largest element 160/80 cm only 16 kg/m2 - almost all requirements can be covered with only one element dimension • Safety due to support grid specified by the system • One system - three ceiling formwork methods o Fall head-carrier element method (RTD) o Main and secondary carrier method (HN) o Element Method (E) • Closed profile made of aluminium o Ergonomic handle profile o High-quality burn-in powder coating for high cleaning friendliness and reduced concrete adhesion • Sophisticated MEVA product design o High-quality ...

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commi ...

-reliably high load capacity across the entire beam length thanks to homogeneous web material -secured component load capacity, as all of the straps are machine stress graded and load-tested -consistent product characteristics owing to high dimensional stability -multiple savings compared to squared timber due to improved load capacity combined with lower weight -Certification EN 13377 -Produced in Austria from Doka Industrie The length of the H20 smart beam varies from 2,45m until 5,90m. Costs: 5,00 EUR/rm For more information or an appointment, you can contact me at any time. Phone: + 43 664 1296830 or Email:office@berger-international.at

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

Just one blow of the hammer on the RU clamp is all it takes to pull the panels together and achieve a flush, correctly aligned panel joint that is resistant to tensile forces. The panels can be continuously height mismatched, i.e. without any pre-defined grid. This means that the formwork can easily be accommodated to e.g. steps, slopes and uneven ground, with no extra work.

Gabelkopf H20, verzinkt, Neu Ausführung mit 4 Winkelprofilen und Rohransatz mit Langloch, passend in alle DIN oder Euro Norm Gewicht 3,20 kg  ... más información

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

With its 15 cm clamping range, the Framax multi-function clamp matches the panel size-grid exactly. This means that only one closure is needed per wall plane.  ... más información

The frames and skin are in a good, very good condition. Parts with new finply. 40x Framax 1,35x2,70m 22x Framax 0,90x2,70m 8x Framax 0,60x2,70m 8x Framax 0,45x2,70m 8x Framax 0,30x2,70m 10x Framax 0,90x2,70m Uni 4x Framax Insidecorner 2,70m 4x Framax Outside corner2,70, 312x Framax RU Clamp 20x Framax Universal fixing bolt10-16cm 24x Framax wedge clamp 12x Framax Universal walling 0,90m 12x Framax Universal walling 1,50m 20x Framax bracket 90 5x Panel strut 340 2x Framax lifting hook 210x tie rod 1,00m 420x super plate 15 2x Doka Box 1,20x0,80m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All t ...

The frames and skin are in a good working condition with used X-Life and parts of it are new with Fin-Ply. 6x Framax 2,40 x 3,30m 66x Framax 1,35 x 3,30m 27x Framax 0,90 x 3,30m 45x Framax 0,60 x 3,30m 8x Framax 0,55 x 3,30m 2x Framax 0,50 x 3,30m 14x Framax 0,45 x 3,30m 15x Framax 0,30 x 3,30m 1x Framax Uni 1,20 x 3,30m 4x Framax Uni 0,90 x 3,30m 22x Framax Inside corner 3,30m Framed formwork Framax Xlife The high-performing steel-framed formwork for crane-assisted forming of large areas Framax Xlife is the framed formwork system that uses only a very few different panel formats to achieve a consistent 15 cm increment-grid, no matter whether the panels are stood upright or on their sides. All the connectors and accessories fit seamlessly into this grid – making for fast forming-times and high efficiency. Rapid working as so few worksteps are involved formin ...

We offer props Doka Eurex 30 Top 250, used, original Doka 3 star rental stock quality ! Doka Eurex 30 top 250, used - 27,90€/pc. Doka stacking pallet 1.55x0.85m, used - 115,00€/pc. - 40 pcs. in stacking rack. All supports are controlled and sorted and are suitable for higher value uses. The props are only delivered in stacking pallets. All prices excl. VAT + transport If you have any questions, please do not hesitate to contact Mr. Becker at 0176-700 44689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

We offer 126 pieces of Dokamatic ceiling tables 2.50x4.00m with 85% discount on the new value of 2.986,00EUR Retail price 447,00EUR/ piece. The Dokamatic slab tables are controlled and sorted and ready for immediate use. all prices excl. VAT + transport Subject to clearance. If you have any questions, please contact Mr. Becker on 0176 70044689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07 arata numarul/9562350, Fax. 07 arata numarul/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055 Qu

We offer a Doka Frami wall and foundation formwork 206,505m² complete with many accessories. The formwork is 90% newly covered with new Finply birch cladding 220- 240g/m²phenolic resin coating. The rest of the elements are checked and sorted and covered with original Doka Xlife formwork. Exposed concrete class 2/3 possible without any problems. New value approx. 160.592,60€, special net price 41.498,15€ Piece Description 19 Frami Xlife-Element 0.30x1.50m new plywood 2 Frami Xlife-Element 0.45x1.50m new plywood 51 Frami Xlife-Element 0,60x1,50m new plywood 35 Frami Xlife-Element 0.75x1.50m new plywood 2 Frami Xlife-Element 0.75x1.50m used top xlife 7 Frami Xlife-Element 0,90x1,50m used top xlife 6 Frami Xlife-Element 0.90x1.50m new plywood 11 Frami inner corner 1,50m 20cm inner corner 7 Frami outer corner 1.50m outer corner 1 Frami hinge corner A galvani ...

We offer a Peri Maximo 270 formwork 221.72m² complete with accessories. The formwork is checked and sorted. Frame cleaned and corrosion sealed with zinc phosphate coating. Formlining used, or new for SB 2/3 ready for use without any problems. New value according to price list 2023 = approx. 172143,00€ Special net price 59500,00€ corresponds to 65% discount Maximo MX15 270 16 x112006 Element MX 270 x 240 8 x112022 Element MX 270 x 120 10 x112045 Element MX 270 x 90 6 x112200 Element MX 270 x 60 8 x112090 element MX 270 x 30 6 x112849 Multi-purpose element element MXM 270 x 60 8 x112078 Element MX 270 x 45 6 x112806 Outer corner MXA 270 x 45 2 x111872 Articulated corner MXGA 270 2 x113203 Articulated corner MXGI 270 6 x115255 Inner Corner MXI 270 x 50/20 2 x114165 Wall Thickness Compensation WDA MX 270 x 4 2 x114186 Wall Thickness Compensation WDA MX 270 x 5 2 ...