- (14)
- Centres de elaboración de rectificado (5)
- Centros de conformación y rotación (10)
- Centros de elaboración (163)
- Centros de elaboración de fresado (9)
- Centros de elaboración del perfil (2)
- Centros de elaboración horizontales (40)
- Centros de elaboración universal (66)
- Centros de elaboración verticales (122)
- Centros de mecanización especiales (1)
- Centros de mecanizado CNC (312)
- Centros de mecanizado CNC horizontales (60)
- Centros de mecanizado CNC verticales (165)
- Centros de mecanizado de alta velocidad (HSC) (5)
- Centros de mecanizado de herramientas (1)
- Centros de procesamiento de portales (9)
- Centros de taladrado (4)
- Centros de taladrado de alta velocidad (HSC) (1)
- Centros horizontales de taladrado y fresado para piezas cúbicas (3)
- Centros verticales de taladrado para piezas cúbicas (2)
- Fábricas de perforación de bandejas (12)
- Fábricas de perforación de bandejas para apoyar las mangas (8)
- Fresadoras de taladro (33)
- Fresadoras universal (1)
- Mandrinadoras (54)
- Mandrinadoras CNC (24)
- Máquinas de machos de roscar (23)
- Máquinas de perforación manual (45)
- Maquinas de perforación profunda (32)
- Máquinas de perforaciones de semillas (1)
- Máquinas de punteo (9)
- Máquinas de punzonar (3)
- Máquinas de taladro de huecos largos (1)
- Mesas giratorias redondas (5)
- Obras de perforación en coordenadas (8)
- Obras educativas en perforaciones (4)
- Otras taladradoras (9)
- Otros centros de mecanización (12)
- Taladradoras (68)
- Taladradoras a batería (8)
- Taladradoras automáticas (28)
- Taladradoras automáticas de tambor distribuidor (1)
- Taladradoras de columna (184)
- Taladradoras de mesa (57)
- Taladradoras de montante (61)
- Taladradoras de precisión (2)
- Taladradoras de punto de centrado (2)
- Taladradoras de sobremesa (62)
- Taladradoras de vias múltiples (2)
- Taladradoras en fila (22)
- Taladradoras especiales (1)
- Taladradoras magnéticas (2)
- Taladradoras multihusillo (32)
- Taladradoras para agujeros profundos (12)
- Taladradoras radiales (92)
- Taladradoras radiales rápidas (13)
- Taladradoras verticales (1)
- Taladradoras verticales de coordenadas (2)
- Taladradoras verticales de plantillas (2)
- Taladradoras-roscadoras (8)
- Taladro de núcleo (1)
- Talarados de alto rendimiento (4)
- Terraja automática (1)
- Tornillos portapieza (67)
- más
- AB MARVIN (1)
- ABA (2)
- ABARBOGA MASKINER (1)
- ABB (1)
- ABCD MACHINERY (1)
- ABM (8)
- ACCUWAY (2)
- Aciera (24)
- ACME (1)
- ADRIASTROJ (1)
- AEG (5)
- AGFA (1)
- AGIE CHARMILLES (3)
- AKIRA SEIKI (2)
- AKIRA-SEIKI (1)
- ALBERTI (1)
- ALBRECHT (1)
- ALESA MONTI (1)
- ALESAMONTI (1)
- ALIA TOOL (1)
- ALKETT (1)
- ALLMATIC (11)
- Alzmetall (122)
- AMADA (1)
- AMCO (1)
- ANAYAK (1)
- ANGER (1)
- APEC (1)
- APOLLO (1)
- APRA NET (1)
- ARBOGA (7)
- ARBOGA MASKINER (1)
- ARCHDAHLE (1)
- ARES SEIKI (1)
- ARES_SEIKI (1)
- Arion (2)
- ARLO (1)
- ARNOLD (1)
- ASDORF (1)
- ATLAS COPO (1)
- ATOLL (1)
- ATORN (1)
- AUDAX (1)
- Auerbach (5)
- Avia (4)
- Awea (10)
- AXA (19)
- Axile (2)
- AXON (2)
- AXON LITZ (1)
- AYCE (1)
- AYEL-TECH (2)
- AYERBE (1)
- BARON MAX (1)
- BATLIBOI (1)
- Battenfeld (2)
- BECKER (1)
- BECKHOFF (1)
- BEMATO (1)
- BERG (IBAG) (1)
- BERGER (1)
- BERGMAN-BORR (1)
- BERGMANN (1)
- Bergonzi (4)
- Bernardo (18)
- BERNHARD STEINEL (1)
- Bernstain (2)
- BEYER (2)
- BGU (1)
- Bierrebi (3)
- Bierrebi LEA SRL. (9)
- BIGLIA (1)
- Bimak (3)
- BIZERBA (1)
- BJM BECKHOFF (1)
- BJM Miksch (2)
- BLANSKO (1)
- BLUETECH (1)
- BLUETOOTH CNC (1)
- BLUTHARDT (7)
- BLUTHARDT/PARABO (1)
- BMW (2)
- Boehringer (2)
- BOLLHOFF (1)
- BORING MACHINE UNION (1)
- BOSCH (3)
- BOSS (1)
- BRAGONZI (1)
- BREDA (6)
- BREVETTI MOTTA (1)
- BRIDGEPORT (17)
- BRIDGEPORT 1 (1)
- BRIDGEPORT 2 (1)
- BROTHER (16)
- BUCK (1)
- BUFFALO MACHINERY (1)
- BUMOTEC (1)
- BURGSMUELLER (1)
- BURKHARD UND WEBER (1)
- BURKHARDT + WEBER (4)
- ... más
Fabricante:
(Categoría: 101)
Año de construcción: 2007
usado
X-axis: 1050mm, y-axis: 560mm, z-axis: 520mm, table dimensions: 1200x515mm, max. workpiece weight: 800kg, tool holder: SK40 DIN 69871 / HSK A63, control: Heidenhain iTNC 530, with documentation, an inspection is possible. ... más información
Año de construcción: 1989
usado
X-travel: 2x 500/ 1600mm, y-travel: 300mm, z-travel: 250mm, controls: Heidenhain TNC 355, with documentation, accessories available, was maintained regularly, an inspection is possible. ... más información
Año de construcción: 2005
usado
X-axis: 2000mm, y-axis: 750mm, z-axis: 800mm, max. workpiece weight: 2.5t, spindle hours: 12000h, connected load: 60kVA, length: 4000mm, width: 3100mm, height: 3200mm, weight: 22t, with documentation and tools, has been regularly serviced, on-site inspection is possible, the machine will be available from July 2024.
usado
Connected load: 5kW, weight: 3t. ... más información
usado
Stroke: 780mm, rotational speed: 30-1700/min. ... más información
Año de construcción: 1951
usado
Drilling capacity steel/ cast iron: 35/45mm, length: 1100mm, width: 600mm, height: 2050mm. ... más información
usado
Rotational speed: 37-1900/min, an inspection is possible. ... más información
Año de construcción: 2009
usado
X-axis: 1100mm, y-axis: 610mm, z-axis: 610mm, max. milling spindle speed: 6000/min, control: Siemens 840D SolutionLine, operating hours: 40,964h, with tool holders, hydraulic vices, electromagnetic device, further accessories and documentation, without tools and tool cabinet, a roll end milling cutter is also available, on-site inspection is possible.
Año de construcción: 2006
usado
Travels X/Y/Z: 885mm/600mm/600mm, travels B/C: -10° - 110°/360°, rapid traverse X/Y/Z: 9000mm/min, speed: 28000rpm. Table dimensions X/Y: 950mm/650mm, operating hours: 90711h, spindle hours: 19457h. Including workpiece measuring probe, tool changer with 100 places. ... más información
Año de construcción: 1998
usado
X-axis: 2000mm, y-axis: 400mm, z-axis: 560mm, connected load: 23kVA, weight: 4.7t, fourth axis axis with tailstock, ran in two-shift operation, on-site inspection is possible. ... más información
usado
Number of tool slots: 30, connected load: 18kVA, controls: Fanuc O-M, with chip conveyor, was maintained regularly. ... más información
Año de construcción: 1993
usado
X-travel: 17,000mm, y-travel: 4500mm, z-travel: 1400mm, W-travel: 1000mm, table dimensions: 3300x4400mm, max. workpiece weight: 95t, spindle diameter: 180mm, control: Siemens Sinumerik 880, with documentation, three additional angular milling heads are available, on-site inspection is possible. ... más información
Año de construcción: 1996
usado
X-travel: 630mm, y-travel: 630mm, z-travel: 630mm, B-travel: NC + 2 pallet changers, controls: Heller uni-Pro CNC 90, the machine needs to be overhauled, a power module is defective, therefore Z-axis does not move, reference point approach not possible, with documentation. ... más información
Año de construcción: 2015
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2020
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2015
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2014
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2014
usado
X-travel: 600mm, y-travel: 600mm, z-travel: 500mm, max. rotational speed: 1-17,500/min, max. load: 600kg, number of tool slots: 2x 42, max. tool weight: 350kg, controls: Siemens 840D SL, connected load: 133kVA, length: 4800mm, width: 3370mm, height: 7500mm, weight: 20t with 3D probe and documentation, without operational hours counter, was maintained regularly, an inspection is possible.
Año de construcción: 2006
usado
X-travel: 800mm, y-travel: 800mm, z-travel: 800mm, max. rotational speed: 18,000/min, number of tool positions: 240, number of pallets: 45, rotary table dimensions: 900x700mm, control: Heidenhain iTNC 530, operating/spindle hours: 182,249/ 116. 336h, with tool storage, pallet automation, chip conveyor, handling robot, collision protection Branenkamp, loading crane, zero-point clamping system, accuracy package, automatic swivel milling head, horizontal tool changing device, double gripper, 240 magazine positions HSK 63, NC rotary table, coolant tank 900l, IKZ 80bar through spindle center (AD), chip conveyor, rotating inspection window, 3D path control, was regularly maintained by the manufacturer, on-site inspection is possible.
Año de construcción: 2007
usado
X-travel: 1300mm, y-travel: 710mm, z-travel: 710mm, table height: 710mm, table dimensions: 1500x660mm, table height: 880mm, max. workpiece weight: 1.2t, length: 3400mmm, width: 3240mm, height: 3000mm, weight: 5.5t, with tools, has been regularly serviced, on-site inspection is possible. ... más información