Fabricante:
(Categoría: 103)
Equipped with 2 bins with different heads. ... más información
Travel X/Y/Z: 850mm/500mm/450mm, speed range: 35-18000rpm with 18 steps, table dimensions X/Y: 1250mm/400mm. Control: Heidenhain TNC355, tool holder: SK40, weight: approx. 5500kg. Including an assortment of tools. Documentation available. ... más información
x-travel:600 mmy-travel:500 mmz-travel:450 mmweight of the machine ca.:3,5 t ... más información
Travel X/Y/Z: 600mm/400mm/400mm, rapid traverse X/Y/Z: 3/2.5/2.5m/min, spindle speed: 8000rpm. Table dimensions X/Y: approx. 1150mm/250mm, dimensions X/Y/Z: approx. 2100mm/3000mm/1900mm, weight: approx. 2100kg. Machine switches on, but shows an error message. An inspection is possible. ... más información
Travel X/Y/Z: 630mm/500mm/500mm, max. spindle feed X/Y/Z: 24m/min, max. cutting feed rate: 12m/min. Max. Spindle speed: 8000rpm, table dimensions X/Y: 800mm/500mm. Tool holder: ISO40, tool capacity: 24, max. tool weight: 6kg, max. tool diameter/length: 100mm/300mm, tool change time: 3.6s. Control: Heidenhain TNC 426M, operating hours: 12100h, dimensions X/Y/Z: approx. 2600mm/2400mm/2600mm, weight: approx. 4500kg. Documentation available.
Travel X/Y/Z: 1050mm/530mm/630mm, rapid traverse X/Y/Z: 24m/min, max. spindle speed: 10000rpm, max. tool diameter/length: 90mm/300mm, max. tool weight: 7kg, tool storage: 30, tool holder: ISO40. Table dimensions X/Y: 1150mm/560mm, max. table load: 700kg. Dimensions X/Y/Z: approx. 4300mm x 2300mm x 2600mm, weight: approx. 7800kg. Including suction, 10.00 spindle, IKZ (stronger pump installed). Noises on the spindle, probably caused by ball bearing damage.
X-travel: 500mm, y-travel: 380mm, z-travel: 360mm, main spindle/turning spindle speed: 10,500/ 3000/min, max. axis speed: 60m/min, control: Siemens 840D, with HSK-A63 and collet chuck, some spare parts are also available. ... más información
x-travel:600 mmy-travel:450 mmz-travel:450 mmspindle speeds:40-2000 1/min (vertikale Spindel) / variabel spindle taper:40 ISOspindle stroke:60 mmtable surface area:850 x 450 mm (horiz.) table surface area:1190 x 250 mm (verti.) table load capacity:300 kgT-slot (width-distance-quantity):14 x 63 x 7 (für horiz. Tisch) mmT-slot (width-distance-quantity):14 x 63 x 3 (für vert.Tisch) mmfeed:10-1000 mm/minfeed stepless:in allen Achsen rapid traverse x + z axis:1200 mm/min:1200 mm/min.main drive:5,5 kWweight of the machine ca.:ca. 1750 kgdimensions of the machine ca.:ca. 1600 x 1800 x 2000 mmEuropean electric:im Wesentlichen von Schneider spindle protection:von Techno PIU (Italien)
Controls: ELESTA, an inspection on site is possible. ... más información
X-travel: 900mm, y-travel: 630mm, z-travel: 500mm, table dimensions: 1200x600mm, spindle drive: 15kW, tool holder: ISO/ SK 40, rotational speed: 20-6300/min, control: Heidenhain TNC 407, length: 3050mm, width: 2300mm, height: 2300mm, weight: 6.7t, with graphics screen, 40-fold tool magazine, vertical head, protective cabin, without chip conveyor and cooling lubricant device, was used for approx. 20 years in model making for plastic and wood processing, the control was replaced at the end of 2002, available from March 2024, can be inspected on site.
With milling disks, tools and accessories, without documentation, on-site inspection is possible, year of manufacture unknown. ... más información
Length: 1600mm, width: 1400mm, height: 1600mm, weight: 1.25t, with documentation and accessories, an inspection is possible. ... más información
X-travel: 560mm, y-travel: 500, z-travel: 450mm, rotational speed: 40-4000/min, connected load: 16.5VA, control: Contour 3, weight: 2.7t +295kg control cabinet, spindle y-axis defective, fourth axis defective, on-site inspection is possible. ... más información
x-travel:1320 mmy-travel:500 mmweight of the machine ca.:6,4 ttable diameter:1830x450 mm ... más información
X-travel: 1000mm, y-travel: 600mm, z-travel: 800mm, rotational speed: 20-400/min, mounting: SK 50, number of mountings: 36, control: MAHO CNC 432 V603, connected load: 22kW, weight: 10.5-12t, operating hours: 51,669h, without tools, with NC rotary table, automatic swivel head, IKZ system, Hydac oil cooler for hydraulic system, Bader cooling unit for switch cabinet, chip conveyor, IFM 1000 mechanical air filter, Visiport viewing window, infrared measuring probe and documentation, was completely overhauled in 2003 and maintained regularly, on-site inspection is possible.
X-travel: 11,000mm, y-travel: 5000mm, connected load: 50kW, on-site inspection is possible, the drive motor of the spindle on one traveling column has been removed and is defective. ... más información
Equipped with 24-way tool change magazine; including cooling and filter installation ... más información
Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.
X-travel: 2520mm, y-travel: 3520mm, z-travel: 160mm, table dimensions: 2500x3500mm, control: CNC Microstep 980, length: 4320mm, width: 3100mm, height: 1820mm, weight: 900kg, including production computer with flat screen and Cenon CAM software, combination cutting/folding device, dust extraction device, industrial vacuum cleaner (1200W, 36l container volume), cooling and spraying device, automatic Z-adjustment, control cabinet, control and simultaneous interpolation of up to 5 axes, true 3D machining possible, continuous path with dynamic, pre-calculation, high machining speed exponential acceleration ramps, 4 digital outputs, 4 digital inputs, spindle interface (digital and analog), connection options are spindle controller, electronic workpiece leveling, automatic Z-adjustment, automatic tool change, automatic tool change, automatically switched tool cooling, safety device, control pan ...
x-travel:3200 mmy-travel:2000 mmz-travel:800 mmtable-size:3200 x 1600 mmT-slot (width-distance-quantity):8x 22 x 180 mmmax. table load:10 tdistance between columns:1840 mmdistance spindle nose and table:180~980 mmspindle drive:22/26 kWmax. torque on the spindle:560/662 Nmspindle nose:50 BTspindle speed:6000 U/minrapid traverse X,Y:20000 mm/min.rapid traverse Z-axis:15000 mm/minmilling feed range:1~10000 mm/minMachine size (LxWxH):8927 x 5217 x 4339 mmtotal power requirement:60 kvaweight of the machine ca.:29 tpositioning accuracy:0,025 (gem. VDI/DGQ3441) mmrepeating accuracy:0,020 (gem. VDI/DGQ3441) mmCNC controller:FANUC 0i MF (mit AICC II, Ethernet DNC, fine mould package, machining condition selecting) gear box:BF Getriebe heat exchanger:für den Schaltschrank chip conveyor with chip bucket:2 Stk. Spirale, 1 Stk. Scharnierband CE-design:gegen Mehrpreis möglich (verlängert die Ausl ...