Fabricante:
(Categoría: 103)
x-travel:850 mmy-travel:280 mmz-travel:355 mmtotal power requirement:8 kWweight of the machine ca.:4 tdimensions of the machine ca.:2 x 2 x2.40 mrevolutions per minute: 28-1.400 U/mintable-size:1.200 x 370 mmsurface area:1.060 x 260 mmspindle taper:SK 50 ... más información
Tabletop pantograph / engraving machine, up to 6x reducer, 230volt, and a beveling machine / facet milling machine 230volt (missing drive belt) ... más información
x-travel:560 mmy-travel:500 mmz-travel:450 mmtotal power requirement:16,5 kVAweight of the machine ca.:2700 kgdimensions of the machine ca.:2,30 x 3,0 x 1,90 mcontrol:Grundig quill stroke:80 mmtool taper:SK 40 spindle speeds::40..4000 1/minfeed:2 .3600 mm/minrapid traverse:4000 mm/minDocuments:vorhanden
x-travel:1120 mmy-travel:345 mmz-travel:400 mmtotal power requirement:14,5 kWweight of the machine ca.:3,85 tdimensions of the machine ca.:3.500 x 2.920 x 2.710 mmtable-size:1600 x 400 mmspindle taper:SK 50 ... más información
total power requirement:2,4 kWweight of the machine ca.:1150 kgdimensions of the machine ca.:1550 x 1615 x 1630 mmtable clamping surface LxW:315 x 710 mmmax. tool weight:200 kgT - slots distance:63 mmT - slots - width:12 mmtaper bore:Spindel SK 40 spindle turning speed range:56 - 1800 U/minfeed speeds:11,2 -355 mm/minDocuments:vorhanden
x-travel:600 mmy-travel:400 mmz-travel:380 mmtotal power requirement:6 kWweight of the machine ca.:1700 tdimensions of the machine ca.:1800 x 2130 x 1980 mmTable dimensions:400 x 800 mmT-slots:7 St.,14 x50 table load:300 kgspindle:SK40 turning speed range:63-250 U/minspeed steps work spindle:18 spindle speeds::50- 2500 n/minfeeds:10-500 mn/minDocuments:vorhanden
x-travel:500 mmy-travel:400 mmz-travel:340 mmwork table::800 x 400 mmcontrol:Numerik CNC - H 646 spindle turning speed - stepless:20 - 3000 U/mintotal power requirement:14 kWweight of the machine ca.:2400 kgdimensions of the machine ca.:2100 x 1800 x 2400 mm ... más información
x-travel:600 mmy-travel:500 mmz-travel:400 mmspindle diameter:90 mmspindle turning speed range:45 - 2000 U/mintable length:1250 mmtable width:200 mmgroove width:14 mmtable rotating:45 °total power requirement:4,2 kWweight of the machine ca.:2000 kgdimensions of the machine ca.:2000 x 1800 x 1550 mmYear:ca.1957 Documents:vorhanden
This Röders RFM 600/2 Vertical Machining center was manufactured in the year 2002 in Germany. It is equipped with a Roders Tec RMS6 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm. ... más información
This Röders RFM 760/2 Universal Machining Center was manufactured in the year 2004 in Germany. It is equipped with a Röders RMS 6 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm. ... más información
This RÃDERS 600 RFM-2 Vertical Machining center was manufactured in the year 2004 in Germany. ... más información
machine has transport damage, 7.5 hp, Tilt adjustment possible ... más información
Pinole stroke: 130 mm; Including machine clamp ... más información
x-travel:6000 mmy-travel:2100 mmz-travel:1500 mmControls:HEIDENHAIN iTNC 530 BASIC DESIGN:. - basic design : travelling column :. WORKING RANGE -MILLING-:. - x-axis traverse:6000 mm - y-axis traverse:2100 mm - z-axis traverse:1500 mmFLOOR PLATE:. - clamping surface (left-right):7000 mm - clamping surface (front-back):2000 mmWORKING SPINDLE / HEAD:. - spindle type : orthogonal head :. - tilting range:360 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - tilting range (2nd axis):270 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - spindle revolutions (min):20 /min - spindle revolutions (max):4000 /min - spindle diameter:90 mm - taper fixture : ISO SK 50 :. - spindle power (continuous):32 kW - torque (max.):910 NmAXIS DRIVES:. - feed velocity (min):2 mm/min - feed velocity (max):20000 mm/min - rapid traverse:25000 m ...
x-travel:800 mmy-travel:630 mmz-travel:500 mmfeed stepless:1-7500 mm/minrapid traverse feeds:7500 mm/mintool cone:40 ISOspindle drive motor:10 kWturning speed range - spindle:20-4000 U/minTorque of spindles:630 Nmtotal connected load:25 kWweight of the machine ca.:5 tdimensions of the machine ca.:15 qm100 % before loadingwarranty:noneThe machine is in very good condition (only one prior owner), only few operating hours. Machine was installed first time and equipped with CNC Heidenhain TNC 355 in 1996. Other optional accessories can be delivered. Price basis: ex stock, free on trucktime of delivery: immediatly, prior sales reservedpayment:100% before loadingwarranty: nonetechn. documentation: as available.
x-travel:1000 mmy-travel:480 mmz-travel:480 mmtable width:315 mmtable length:1250 mmtable - longitudinal motion:1000 mm:1250 x 315 mmturning speed range:28 - 1400 U/minpower capacity:3,7/4,4 kWtotal power requirement:6 kWweight of the machine ca.:2800 kg100 % before loadingwarranty:noneone used knee and column milling machine-universal, make UNION Bielefeld, type USF 4, Baujahr 1970, Maschinen-Nr. 55/214
x-travel:600 mmy-travel:500 mmz-travel:450 mmweight of the machine ca.:3,5 t ... más información