Fabricante:
(Categoría: 103)
Description: Swivelling head, travel X approx. 400 mm, Y approx. 200, Z approx. 300 mm, speed range 56 to 1800 rpm, feed rates 11.2 to 355 mm/min, machine is equipped with a counter bearing for horizontal milling, for further details see photosApprox. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 1,700 mm, weight approx.: 2,800 kg
x-travel: 700 mmy-travel: 400 mmz-travel: 450 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-axis digital read outhorizontal and vertical milling spindlequillTechnische Daten / technical details:Längsweg X / X-travel longitudinal 700 mmQuerweg Y / Y-travel cross 400 mmSenkrechtweg Z / Z-travel vertical 450 mmTischgröße / table size 1000x470 mmSpindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 31,5-1600 UpM /rpmVorschubbereich X und Y-Achse / feed range X and Y axis 10-500 mm/min.Vorschubbereich Z-Achse / infeed Z-axis 5-250 mm/minAntriebsleistung/ power capacity 5 kWGewicht der Maschine / weight 2400 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data f ...
x-travel: 340 mmy-travel: 200 mmz-travel: 340 mmtotal power requirement: 2,3 kWweight of the machine ca.: 980 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
tool taper: MK4 diameter of tools max.: Ø 145 mmtable-size: L: 800 x B: 700 mmsurface area: Ø 300 mmtable travel: 200 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,9 tdimensions of the machine ca.: 2,8 x 1,5 x 2,3 mAdditional information:Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profilesCycle milling and single milling as well as up-cut and climb millingSpecifications for machining spur and worm gears:-Outer Ø max. 250mm with counterholder-pitch max. 5mm-Tooth helix max. 45°-Tooth width max. axial milling 200mm and radial-axial milling 240mm-Milling width max. clamping table counterholder 655mmMilling slide:-swivelling 210°-travelling distance 350mm-feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolutionFurther features:-counter-point taper MK4, co-rotating-Centre distance of milling/clamping spind ...
Description: max. module: 8 mm table diameter: 370 mm largest diameter of the machined wheel: 400 mm rated power: 35 kVA chip conveyor  , equipment: shift wheel cabinet set of shift wheels shanks for mounting cutters - 5 pieces milling stands pins mounting sleeves claws for mounting pins technical and commissioning documentation and user manual in Polishwiring diagramsworm cutters  , , dimensions: installation dimensions: ,3300 x 2850 x 2300 mm transport dimensions: ,3150 x 2000 x 2300 mm control cabinet: ,1000 x 400 x 2300 mm 3 x Euro pallets with equipment: ,1200 x 800 x 500 mm tool locker: ,1000 x 650 x 1200 mm  , with equipment for cylindrical gears  , the offer does not include other elements of machines, devices and tools that are not related to the machine  , please also have a look at the videos and PDF documents of thi ...
Table dimensions: 500x200mm, connected load: 1.5kW, length: 1110mm, width: 1170mm, height: 1650mm, weight: 770kg, with documentation, without accessories. ... más información
Working range: 1000mm/355mm, table size: 1400mm/250mm, spindle: SK50, digital display: Mitutoyo. ... más información
Machine type milling machine - universal brand HURON type MU 5 year 1975 control type conventional storage France country of origin France delivery immediately cargo base camp, free truck Technical details x way 1300 mm y path 700 mm z-way 550 mm table size 1500 x 460 mm spindle speeds 15-2500 RPM spindle retainer for SK 40 feed range x - direction 1,6-820 mm / min feed Empire z-direction 1,6-820 mm / min rapid traverse X + Z - axes 2.8 m/min rapid traverse y - direction of 2.8 m / m in power - spindle motor 10 kW total power 14 kW machine weight approx. 4.6 t additional information good condition with 3 axis of DIGITAL HEIDENHAIN SK 40 BUILT IN 1975
Rotational speed: 112-3000/min, controls: SHW-NC, an inspection is possible. ... más información
x-travel: 13.000 mmy-travel: 2.500 mmz-travel: 2.250 mmw-travel: 360 mmtable:: double table: 12.500 mmtable load: 50 ttable width: 2.400 mmbed length: ca 26.000 mmPassage height: 2.250 mmmilling height: 2.000 mmmax. passage: 2.750 mmdiameter of quill: 130 mmspindle turning speed range: U/mintransmission ratio: drive capacity - spindle motor: kWspindle taper: dia. of quill: 280 mmquill:: ISO 50 rapid travel x/y/z: 8 / 1,5 / 3 m/minelectrics - voltage/frequency: 380/50 V/Hzweight of the machine ca.: tdimensions of the machine ca.: mtable guidance: hydrostaticuniversal angular head 37 kWangular milling head 37 kWangular milling head 56 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Tool holder: SK 40 Travel X/Y/Z: 620 / 420 / 400 mm Speed range: 40 - 2200 1/min Table size: 800 x 380 mm Motor power: 4 kW Dimensions (WxDxH), approx.: 1780 x 1600 x 2130 mm ... más información
max. wheel diameter: 280 mmmax. number of teeth: 100 max. module: 6 min. module: 1 total power requirement: 6 kWweight of the machine ca.: 2500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
Technical data: -Table size 1600 x 370 mm -Work area of the axles -X (longitudinal) 1000 mm -Y (transverse) 320 mm -Z (vertical) 420 mm -Milling head left + right Tilt + Swivel - 9 table feeds 20-800 mm / min -Rapid traverse longitudinal / transverse 3000 mm/min -Rapid traverse vertical 1375 mm / min -maximum distance spindle - top 480 mm -min / max distance spindle Center / stand 450 mm -Tool holder ISO 50 - work spindle speeds in 12 levels adjustable 45-1400 RPM - coolant system - powered 400 V / 5,8 kW -Space requirement approx. B H 2100 x 2200 x D 2800 mm -Weight approx. 3500 kg
x-travel: 400 mmy-travel: 220 mmz-travel: 400 mmspindle taper: ISO 40 spindle turning speed range: 25 - 2500 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1200 mm/mincreep feed: 4 mm/mincontrol: Heidenhain TNC 113 total power requirement: 2 kWweight of the machine ca.: 1500 kgdimensions of the machine ca.: mCondition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 700 x 330 mmTaper: diverse Bellows with slats of aluminium: Protection cabin: bottom tray: Machinefeets: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2 stueck fraesmaschinen SCHAFFNER F.17.34, table 750 / 180, with double vertical freskopfFurther:2 piece SCHAFFNER 17.3also horizontal ... más información
x-travel: 1600 mmy-travel: 800 mmz-travel: 700 mmtable:: 2000 x 630 : control: Heidenhain type: TNC 355 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
x-travel:800 mmy-travel:250 mmz-travel:350 mmtable-size:1130 x 250 mmno. of flutes:4 groove width:14/25 mmtaper MK:4 spindle turning speed range:56 - 2800 U/mintotal power requirement:9,5 kWweight of the machine ca.:2009 kgdimensions of the machine ca.:1400 x 1700 x 2800 mmDocuments:vorhanden ... más información
Qty. 1 Second-hand milling and scalping machine – Copper and brass strip – stopped in 2010 Mfc.: Torrington Type: FR1 Built: 1976 Milling and scalping from the upper and lowe sides Strip width: 508 - 770 mm Strip thickness: 10.0 – 13.5 mm Coil weight: 6.5 Ton Capacity: approx. 200 000 T/annum
x-travel: 850 mmy-travel: 250 mmz-travel: 470 mmtable-size: 1250x350 mmspindle taper ISO: 40 spindle turning speed range: 45-2000 U/minweight of the machine ca.: 2.5 tWith digital read-outMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.