Fabricante:
(Categoría: 104)
Weight: 2.2t, including documentation. ... más información
X-travel: 270mm, y-travel: 480mm, z-travel: 110mm, U-travel: -100 to 106°, max. workpiece diameter: 25mm, workpiece length between the tips: 40-180mm, controls: FANUC GE, connected load: 42kVA, weight: 9t. ... más información
max. grinding diameter:160 mmstations:2 sanding width:30 mmtotal power requirement:0,37 kWweight of the machine ca.:100 kgdimensions of the machine ca.:520 x 520 x 1160 mm ... más información
Collet: SCHAUBLIN W25, controls: FANUC GE, including loader. ... más información
no. of working stations:1 Stücktool adaptor:1650 W revolutions per minute:2990 U/mintotal power requirement:380V, 2,7 Aweight of the machine ca.:33 kg ... más información
X-travel: 270mm, y-travel: 480mm, z-travel: 110mm, U-travel: -100 to 106°, max. workpiece diameter: 25mm, workpiece length between the tips: 40-180mm, controls: FANUC, connected load: 42kVA, weight: 9t. ... más información
no. of working stations:1 Stücktool adaptor:1650 W revolutions per minute:2990 U/mintotal power requirement:380V, 2,7 Aweight of the machine ca.:33 kg ... más información
X-travel: 270mm, y-travel: 480mm, z-travel: 110mm, U-travel: -100 to 106°, max. workpiece diameter: 25mm, workpiece length between the tips: 40-180mm, controls: FANUC Series 15-M, connected load: 15kW, weight: 9t. ... más información
grinding diameter:1000 mmgrinding length:6000 mmcentre height:510 mmmax. workpiece weight:1800 (zw. Spitzen) kgmax. workpiece weight:7000 (m. Lünetten) kggrinding spindle speed:400-1200 1/mingrinding wheel diameter:915 mmgrinding wheel width:100 mmgrinding wheel peripheral speeds::35 m/seccross adjustment:autom. 0,001 mmcross adjustment:mit Handrad: 0,001/0,01/0,1 mmtable travel:6200 mmtable speed -stepless-:10~4500 mm/minRotation speed of workhead :3~30 1/mintailstock quill stroke:150 mmtaper in tailstock-quill:6 MKtailstock adjustment:über Pneumatik tailstock quill adjustment:manuell spindle drive:30 kWWeight approx.:26 tdimensions:17500x3700x1900 mmsurface roughness: max. 0.3µm Racylindricity:0.002~0.005 mm/m roundness:0.002~0.005 mmCNC controller:Siemens 828D mit Schleifzyklen fully enclosed:Optional open steady:Optional live center:2 Stk./pcwarranty: Nonepayment: 100% before load ...
working width:1400 mmWorkpiece thickness max.: 80 mmwork height max.:1000 mmFeed speed:4m/min I Stufe, 8 II Stuf m/min.Required air-pressure:max. 5 barvoltage:50 Hz, 380 Vworkpiece length:320 mmworkpiece thickness min.:1 mmweight of the machine ca.:3500 kgDocuments:vorhanden ... más información
Max. table load: 8t, diameter table: 2000m, max. wheel diameter wheel: 720mm, pressure angle: 12.5-30°, max. bevel angle: 35°, diameter grinding wheel: 300mm/400m, peripheral speeds: 25 or 35m/s, grinding stroke: 750mm, number of teeth: 12-372, length: 6800mm, width: 5500mm, height: 3800mm, weight: 26t, was modernized in 2000 and equipped with CNC control, with documentation, on-site inspection is possible.
workpiece length:350 mmwork piece width:150 mmdiameter:Tellerradius 200 mmtool taper:M32 x 1,5 spindle diameter:32 mmgrinding width:max.450 mmturning speeds:3385 U/minwork table::Höhe 1000 mmworkpiece height max.:100 mmtotal power requirement:1,1 kWweight of the machine ca.:300 kgdimensions of the machine ca.:700 x 800 x 1170 mm
Grinding disk diameter: 600mm, controls: Siemens S7, with documentation, was maintained regularly, an inspection is possible. ... más información
grinding length:7000 mmgrinding width:1450 mmworkpiece height:1000 mmdistance between columns:1510 mmClamping area:7.270 x 1.250 mmtable load:35 ttable speeds:1-50 m/mingrinding wheel dia. x width:horizontaler Stößel: 630x180 mmspindle drive:horizontaler Stößel: 22 kWvertical movement:250 mmgrinding wheel dia. x width:universal Stößel: 500x50 mmspindle drive:universal Stößel: 7 kWvertical movement:450 mmspindle motor:7,5 kWpivoting angle:universal Stößel: 45 Gradweight of the machine ca.:65 tMachine size (LxWxH):20.200 x 8.150 x 4.920 mm:PLC SIEMENS SIMATIC OP 27 grinding wheel with flange:diverse Used Surface grinding machine, ELB, type SWN 8 NPC-K.Machine cleaned and tested by qualified technician Functionality tested.Surface grinding machine in perfect condition, ready for production.Payment: 100% before loading the machineWarranty: none
grinding diameter:355 mmgrinding length:600 mmcentre height:180 mmtotal power requirement:30 kWweight of the machine ca.:7 tmax. workpiece weight:150 kgworkpiece spindle stepless:0-1000 U/minCNC precision cylindrical grinding machine with mobile switching and control panel, general retrofit1 measuring device Marposs P51 attached industrial filter1 2-way robot portal robot for automatic loading
table diameter:520 x 22 mmtable - swivable:45 Gradtotal power requirement:1,6 kWweight of the machine ca.:130 kgdimensions of the machine ca.:520 x 520 x 1200 mmmit SchleifzylinderZubehör: 4 ( Aluzylinder) Werkzeuge zur Aufnahme von SchleifmittelnØ 50, 70 , 90, 120 mm x 223 mmneuer Motor ... más información
Controls: FANUC GE 16, including documentation and tool cones. ... más información
sanding belt length:max. 470 mmworkpiece dia.:600 mmtable - swivable:0 - 6 Gradtaper:Reitstock Morse 2 turning speed range::1260 - 3100 U/mintable movement:längs 470 mmtool taper:schwenkbar 0-6 °, 90° dre total power requirement:0,4 kWweight of the machine ca.:950 kgdimensions of the machine ca.:1100 x 1100 x 1500 mmDocuments:vorhanden
X-axis: 55mm, B-axis: 137°, C-axis: 360mm, with robot, part recognition, pallet changer, measuring control, grinding wheels, rams and dressing pots, an inspection is possible. ... más información