subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 109)
Single/ dual wire diameter: 6-16/ 6-12mm, max. bending speed: 1200°/s, connected load: 22kW, length: 4100mm, width: 1300mm, height: 1650mm, weight: 4.75t, with documentation. ... más información
Filling piston diameter: 60-80mm, controls: Datadialog RC, with double toggle lever, includes (1) Oven Meltec ZC125/250, heating capacity: 32.5-36kW, nominal temperature: 450°C, weight: 600kg, year of construction: 2003 (2) Sprayer Frech Spraymoition 811E, an on-site inspection is possible. ... más información
Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible.
Opening force: 47kN, closing force: 1250kN, diameter of filling piston: 60-80mm, control: Datacontrol 3.01-R, includes, with double toggle lever (1) Oven Meltec ZC125/250, heating capacity: 32.5-36kW, nominal temperature: 450°C, weight: 600kg, (2) Sprayer Frech Spraymotion 611E, on-site inspection is possible.
Processing: both sides, dry, max. workpiece width: 1300mm, material thickness: 0.8-100mm, max. passage width: 1300mm, length: 3100mm, width: 2100mm, height: 2400mm, weight: 5.6t, total operating hours/automatic: 11,002/ 5566h, including 2x 2000mm auxiliary conveyors and extensive documentation, without extraction system or abrasives, on-site inspection is possible.
table length: 1470 mmtable width: 980 mmdaylight: mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
A phosphating-molycotizing plant is available, with three drums and documentation, modernization in 2020, new switch cabinet, control system, touch screen, monitors, timer for chemical tanks, power lines and heating cartridges. ... más información
X-travel: 400mm, y-travel: 350mm, z-travel: 250mm, W-travel: 300mm, max. load: 400kg, length: 1090mm, width: 1750mm, height: 2075mm, weight: 1.2t, with documentation. ... más información
Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000.
Wavelength: 1064nm, max. pulse power: 200kW, max. pulse repetition frequency: 60kHz, connected load: 2kW, with documentation, on-site inspection is possible. ... más información
With documentation, without accessories, an on-site inspection is possible. ... más información
Cable length: 45-1000mm, number of pieces: 1-999,999, stripping length: 0.1-120mm right and 0.1-45mm left, stripping length: 999.9mm on both sides, feed speed: 0.14-1.68m/s, cable cross-sections: AWG 32-8/ 0.06-10mm², solid wire up to 2.5mm², max. cable diameter: 11mm, length: 560mm, width: 500mm, height: 350mm, weight: 45kg, including V-blades, radius blades in various sizes and transport rollers, an on-site inspection is possible.
Output: 225 crates/h, with documentation, an inspection is possible. ... más información
Max. working temperature: 350°C, grate dimensions: 1050x650mm, an inspection is possible. ... más información
Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
Bear weight: 300kg, lifting speed: 130/min, with documentation, an on-site inspection is possible. ... más información
Bear weight: 400kg, lifting speed: 125/min, connected load: 30kW, with documentation, an on-site inspection is possible. ... más información
Bear weight: 500kg, lifting speed: 120/min, connected load: 45kW, with documentation, the scraper is defective, the dovetail is broken, an on-site inspection is possible. ... más información
Usable chamber dimensions: 3800x1800x300mm, max. operating temperature: 1000°C, max. annealing temperature: 980°C, max. workpiece weight: 800kg, fuel: natural gas, connected load: 600kWh, with documentation, on-site inspection is possible. ... más información