subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 109)
X-travel: 250mm, y-travel: 160mm, table dimensions: 420x250mm, max. workpiece height: 160mm, max. workpiece weight: 120kg, length: 1545mm, width: 1240mm, height: 1065mm, weight: 540kg, with documentation, the machine should be overhauled, an inspection is possible. ... más información
Connected load: 6.2kVA, weight: 325kg, with Head AGIE TESTA-10, weight: 120kg, the machine should be overhauled, an inspection is possible. ... más información
With digital display for roller adjustment, pressure roller supports electro-hydraulically adjustable from the mobile control panel, including digital displays, universal bending roller set, e.g. angle leg outside 100x100x10 to min.1400mm, the machine was never used. ... más información
There are two identical polishing machines available, with accessories and documentation. ... más información
Working/ nominal temperature: 800/ 850°C, inner dimensions: 1100x500x260mm, heating output: 120kW, connected load: 1.5kW, with documentation, without accessories or spare parts, an inspection is possible. ... más información
Two multiple drawing machine Breitenbach Standard 4-III/8 are available, inlet/finished diameter: 3/ 0.8-1.5mm, drawing speed: 2-8m/s, weight: 11.17t, machine 2 is in the same design as machine 1, but set up for torsion free multiple drawing with twin pulleys, with documentation and spare pulleys, has been regularly maintained.
Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine. ... más información
Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. ... más información
The machine was overhauled by the manufacturer in 2022, the coating inside the coil was renewed, the oven was then no longer used, the oven no longer complies with the EMC guidelines, without control, an on-site inspection is possible. ... más información
Max. hydraulic pressure: 200bar, hydraulic oil capacity: 400l, length: 2000mm, width: 1500mm, height: 1000mm, with operating instructions, wiring diagram and installation instructions, on-site inspection is possible. ... más información
Two Bihler reels are available, without documentation, an inspection is possible. ... más información
X-travel: 570mm, y-travel: 320mm, z-travel: 265mm, B-travel: +/-130°, C-travel: 360°, max. workpiece dimensions: 150x150x100mm, connected load: 40kVA, controls: Bosch Rexroth MTX, weight: 16t. ... más información
Eroding diameter: 100-420mm, max. roll length: 2500mm, roll weight: 8t, eroding length: 11mm, number of electrodes: 60, length: 5000mm, width: 2000mm, height: 1200mm, weight: 25t, with documentation, inspection is possible. ... más información
There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min. ... más información
Max. coil diameter: 2000mm, max. coil width: 1500mm, max. coil weight: 5t, max. tensile force: 550kg, winding speed: 0-20m/min, connected load: 4kW, with pressure roller system and documentation, suitable for the production of stainless steel pipes, an inspection is possible. ... más información
X-travel: 800mm, y-travel: 600mm, z-travel: 400mm, U-travel: 60mm, V-travel: 60mm, workpiece dimensions: 1300x910x400mm, max. workpiece weight: 2.3t, dielectric capacity: 210l, connected load: 10kVA, length: 2550mm, width: 2350mm, height: 2200mm, weight: 4.84t, with generator, wire guide, protective cabin, documentation and other accessories, on-site inspection is possible.
Table dimensions: 1200 x 850 mmMotor output: 5,0 / 6,2 kWSpindle diameter: 30 mmreus: 3/4/5/6/8/10000 U/minWeight: 920 kgYear: 1991 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información
Working diameter: 1000mm, working height: 450mm, max. workpiece weight: 900kg, noise level: 78dBA, connected load: 7.34kW, length: 3000mm, width: 3000mm, height: 3500mm, weight: 2.045t, operating hours: 9372h, including documentation, cabin with turntable, manganese lining, blast wheel (radial armouring, ceiling armouring, throwing blades in HM design), sieve, bucket elevator, separator, extraction system cyclone, filter (new filter cartridges installed), control panel electrical system, has been regularly maintained, on-site inspection is possible.
Controls: AGIE PULS 30L, connected load: 11kVA, an inspection on site is possible. ... más información
Single/ dual wire diameter: 6-16/ 6-12mm, max. bending speed: 1200°/s, connected load: 22kW, length: 4100mm, width: 1300mm, height: 1650mm, weight: 4.75t, with documentation. ... más información