otras máquinas para el procesado de metales usadas para la venta

Automatic 3D wire bending machine was manufactured in Poland in 2022. The machine is used to automatically bend cut wire with a diameter of 4 to 8 mm. The structure made of thick-walled steel profiles, together with high-quality components, guarantee high bending precision and reliable operation. The automatic wire bending machine is equipped with a bending head with carriage and grippers and a wire feeding module consisting of a cut wire magazine and a selector mechanism. The workpiece taken from the magazine with a capacity of 150 kg, is fed via the wire selector mechanism into the feed channel, where it is pushed into the bending head and processed. At the end of the process, the bent wire falls into a receiving hopper or support table. All the capabilities of the wire bending machine are controlled by an installed PLC with an intuitive interface, taking care of the performance  ...

KELCH KALI-tec A tool presetter built in Germany in 2004 is a high-tech device for accurate measuring, presetting and simultaneous tool shrinking. The state-of-the-art KELCH tool presetter with integrated induction coil is offered with equipment that includes e.g. the electronic measuring system with intelligent image processing KELCH EasyVision and the KELCH Easy Webset computer software for tool measurement and inspection. The tool length is determined by the setting adapters before the chuck heating phase. The KALI-tec A tool measuring and presetting machine then automatically sets the tool exactly to the target length during the chuck opening phase by heating, while for more complex measuring tasks or tools made of high-speed steel the KELCH i-tec shrink-fit device shrinks the tool to the target length using intelligent calculations and pre-positioning of the setting pins. Tech ...

AMP VBF-60/60/100-1.5 horizontal vacuum furnace was manufactured in Poland in 2012. The machine, which has a horizontal construction with a large cylindrical heating chamber, is designed for, among others, annealing, degassing, brazing and hardening of long workpieces with a maximum weight of 600 kg, without the risk of deformation. The AMP vacuum furnace ensures that a constant temperature of 1180°C is maintained throughout the treatment, due to the insulation inside the heating chamber in the form of a graphite mat fixed to the chamber casing by molybdenum rods with graphite composite pads. The capacious heating chamber also contains heating elements, charge holding supports and cooling nozzles through which cooling gas flows during the cooling cycle. All parameters, such as vacuum, temperature course and cooling gas pressure, are programmed in a special controller, installed in a  ...

OKUNO MSC-15 spring coiling machine was manufactured in 1998 in Japan by OKUNO Machine Co. The machine designed for the efficient production of springs from wire with a maximum thickness of 0.3 mm, consists of a wire spool rack with a braking system, a heating device for annealing and a forming machine. The wire processing process begins with taking material from a spool mounted on the machine stand, which is then fed into the heating device to anneal both ends of the spool. The pre-treated material is then fed further into the forming machine, where it is shaped into a spring by automatic cutting and bending. The length of wire feed is regulated by a digital indicator located on the machine frame. Technical data of the OKUNO MSC-15 spring coiling machine - maximum wire feeding length: 10m ± 5 mm - thickness of material: 0.15 – 0.3 mm - material width: 5.0 – 15.0 mm - maxi ...

Scaffolding production line built in 2015 is designed for the efficient production of steel boards used in construction scaffolding. The sheet metal unrolled from the coil goes through a straightening machine and is then subjected to the relevant machining stages. At the beginning of the machining process, the appropriate side holes are punched and the sheet is perforated to ensure adequate slip resistance. In a further stage, the sheet goes through a rollforming line, which gives the final shape of the board. The installed software of the machine allows to choose from 8 different steel scaffolding board lengths ranging from 0.73 m to 3.07 m. A complete steel scaffolding boards production line with tooling performs the entire process fully automatically. The automated production line for construction scaffolding boards consists of the following components: – software – B&R PP41  ...

MACRI ITALIA PROVAR 5-90 U-D tube bending machine, built in Italy in 2010 is used for the fully automatic process of fixed radius and variable radius workpiece bending on two different dies. The machine is characterised by a highly rigid steel structure, modern components and extensive equipment. All 5 axes of the machine (X, Y, Z, B1, B2) are equipped with reliable brushless servomotors in order to provide the user with high dynamics and excellent positioning accuracy when machining tubes and profiles with a maximum length of 5100 mm. The installed state-of-the-art MACRI software allows, among others, to program the positioner force, perform an anti-collision test with 3D simulation, import files from 3D programmes and program the speed of movement of each axis for each bend. The PROVAR 5-90 U-D mandrel bending machine weighs 6000 kg. Technical specifications of the MACRI ITALIA PROV ...

LXSHOW LXW 2000 W FIBER laser cleaner manufactured by Chinese manufacturer LXSHOW Jinan Lingxiu Laser Equipment Co., Ltd. in 2022, is a widely used industrial device designed to remove e.g. rust, paint, oil and oxide layers from the surface of workpieces. The use of the laser cleaner guarantees the removal of contaminants without any damage to the surface and achieves exceptional cleanliness, impossible to achieve with conventional workpiece cleaning. Laser cleaning is performed without the use of chemicals or cleaning solutions, making the fiber laser cleaner environmentally friendly. At the end of the process, the waste takes the form of a solid powder, easy to store and recycle. The LXSHOW fiber laser offered together with the reliable 2 kW RAYCUS RFL-C2000 generator ensures long-lasting, uninterrupted and highly efficient performance at a low cost of operation. The LXSHOW LXW20 ...

FARO EDGE 2.7 M coordinate measuring arm was built in 2014. The efficient and productive portable measuring arm verifies the quality of workpieces of any shape by measuring components in 2D and 3D with an accuracy of ± 0.017 mm. The mounted measuring head and the non-contact laser scanning function also allow for comparative analysis of individual components and assemblies with CAD files. The machine has been designed with convenience and ease of use in mind, as evidenced by the excellent weight distribution and balance maintained. The FARO EDGE measuring machine consists of: – a 2.7 metre long measuring machine with base plate and probe, – battery and cables, – a removable handle, – a non-standard case (hard case). Applications of the FARO EDGE 2.7 M machine - measuring and verifying the dimensions of machine parts of any shape - measurement of shape deviation and c ...

AL-2500/KX knotted wire mesh production machine was built in 2013 by KABEX P.P.H.U.. The purpose of the machine is to produce damage-resistant and durable wire mesh made of galvanised wire with a maximum length of 100 metres and varied wire cross-sections. The AL-2500/KX fixed knot net production line consists of: – machine body (1 unit), – guide roller with a brake to increase wire tension (1 unit), – tool table with turning rollers and wire guide tubes and plates (1 unit), – wire feeder with wheels that feed the appropriate length of wire onto the tool table for wire wrapping (1 unit), – pulling drum (1 unit), – mesh winding drum (1 unit), – twisting mechanisms (27 units), – guillotines (26 units), – wire bending clamps (27 units), – net stacking table, which performs a reciprocating motion in order to place the net coils tightly next to each other (1 u ...

FRANCE ETUVES XXL01 industrial furnace was manufactured in 2013. The furnace used in curing, polymerisation, coating, heating and drying of workpieces has a structure made of high quality steel with a 1000 litre capacity utility chamber. A large opening door allows for quick and easy loading of workpieces without weight limit into the chamber. The air from the top of the furnace is drawn in, heated to 200°C and blown out from the rear of the chamber onto the workpieces via an efficient ventilation system. All of the furnace’s heating elements are ideally positioned in the airflow, guaranteeing fast and efficient heating. In the case of a malfunction, the fan and the heating process are automatically stopped. The machine is equipped with a PID control C3000 with functions such as real-time temperature display, start delay and cycle repeat. The total weight of the furnace is 500 kg.  ...

TEPARK KPI-115-ST500 sandblasting cabinet manufactured in Poland in 2011 is used for thorough cleaning of small and medium-sized workpieces using abrasive materials such as electrocorundum or steel shot. The cabin sandblasting machine’s structure is made entirely of welded sheet metal to ensure high durability and tightness. Inside the machine is a fully lit working chamber with a 150 kg rotary table. The total weight of the sandblast machine is 280 kg. Technical data of the TEPARK KPI-115-ST500 sandblasting machine - maximum workpiece weight: 150 kg - work chamber size (L x W x H): 1150 x 900 x 800 mm - rotary table - injector gun - chip extractor: DEDRA DED7724 - workspace illumination - pressure: 10 bar - power supply: 230 V; 50 Hz - weight of machine KPI 115 ST500: 280 kg

DEA GLOBAL S 07.05.05 coordinate measuring machine was manufactured in Italy in 2004. The machine performs fast and highly accurate measurements of workpieces with complex shapes using the contact or non-contact method, represented as a set of coordinate points. The excellent quality and precision of the process is guaranteed thanks to the mounted in the DEA GLOBAL S 07 05 05 CMM machine an indexable RENISHAW PH10MQ measuring head with a RENISHAW SP25M scanning probe, performing measurements in the X,Y,Z axes with feeds of 700 mm (X axis), 500 mm (Y axis) and 500 mm (Z axis). The DEA GLOBAL Status 07.05.05 measuring machine is also equipped with the highly advanced metrology software PC-DMIS 2019 R1, performing detailed geometric measurements. Technical specifications of the DEA GLOBAL S 07.05.05 measuring machine - maximum permissible error of length measurement MPEe: ± 2.3 + 3L/10 ...

MACRI ITALIA PROVAR 6-45 U-D bending machine was manufactured in 2019 in Italy. The fully automatic mandrel bending machine is used in the process of machining tubes and profiles with a maximum diameter of 45 mm in 6 numerically controlled axes (X, Y, Z, B1, B2, A). Excellent process stability and workpiece quality, with the possibility of bending standard and variable (free) radiuses, are guaranteed thanks to the robust steel construction, the moving head with high-strength gears and the equipping of all machine axes with brushless servomotors. The MACRI PROVAR 6-45 U-D CNC tube bending machine is controlled using state-of-the-art MACRI software with the ability of importing files from 3D programmes and performing an anti-collision test with 3D simulation, programming of positioner force and automatic mandrel lubrication and many other useful functions. The total weight of the machi ...

ZREMB GH4 tube bending machine, manufactured in 1983, is used in factories during the precise processing of all varieties of installation tubes. The tube bending is performed in a semi-automatic mode on a cam with the mandrel filling the most deformed section of the tube. The machine comes with a comprehensive range of equipment shown in the accompanying photos. The GH4 mandrel bending machine weighs 2450 kg. The ZREMB tube bending machine consists of: – drive mechanism – mandrel feed mechanism – guiding mechanism – control panel mechanism – hydraulic system – electrical installation assembly – frame assembly Technical specification of the ZREMB GH4 bending machine - tube diameters: 1 ½”; 2″, 2 ½”; 3″, 3 ½”; 4″ - maximum bending angle: 180° - bending capacity (30 bends): 180°/h - head working movement time (180°): 38 s - head return movem ...

DEA SCIROCCO 151310 coordinate measuring machine built in 1997 in Italy, is used to make fast and highly accurate measurements of workpieces with complex shapes. Workpiece measurements are taken using contact or non-contact methods, which are then represented as a set of point coordinates. The dimensions of the measured workpiece are taken using the RENISHAW TP7M measuring probe, which is installed on the RENISHAW PH10MQ indexing head. The measuring probe uses strain gauge technology to eliminate granularity errors and achieve the highest measurement quality in the X,Y,Z axes with feeds of 1500 mm (X axis), 1300 mm (Y axis) and 1000 mm (Z axis). The measuring machine is offered with a wide range of equipment, including an advanced PC-DMIS package for Windows, performing detailed geometric measurements. The total weight of the machine is 3650 kg. Technical data of the DEA SCIROCC ...

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

FRECH DAK315H die casting machine manufactured in 1991 by the German company Oskar Frech Werkzeugbau GmbH + CO. KG. is designed for the production of castings by filling moulds with molten brass or aluminium. The reliable FRECH metal injection moulding machine with high-quality components works with casting moulds of a maximum height of 700 mm, which are closed with a force of up to 315 tonnes after being filled with molten material. Depending on the design of the choiceed mould, the aluminium die casting machine also allows for the use of an injection piston with a diameter of 40 to 80 mm. Previously, the machine used a piston with a diameter of 40 mm. The DAK315H aluminium die casting machine weighs approximately 14000 kg. Technical parameters of the FRECH DAK315H metal injection moulding machine - clamping force: 315 t (3150 kN) - injection force: 35 t (350 kN) - ejection for ...

WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW  ...

ZOLLER SMILE / PILOT 3.0 presetting and measuring machine was manufactured in 2019 in Germany. The machine is a professional tool measuring and presetting device, whose easy operation and precision guarantee flawless results. A telecentric lens and a CCD camera with integrated LED ring for measurements in reflected light (blade inspection) are used to perform the measurements. ZOLLER SMILE 420 is equipped with the CNC controller ZOLLER »pilot 3.0« and functions such as automatic blade recognition, measurement of radial run-out and axial run-out, maximum contour function and cutting edge control. The tool to be measured can have a maximum length of 420 mm and a maximum diameter of 420 mm. Specifications of the ZOLLER SMILE / PILOT 3.0 presetting and measuring machine - maximum tool length Z: 420 mm - maximum tool diameter D: 420 mm - diameter measurement according to Abbe’s p ...

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...