máquinas talladoras de engranaje usadas para la venta

max. wheel diameter: 2400 mmgear width: 600 mmmax. module: 30 Control: Sinumerik 840 D workpiece external diameter max.: 3400 rim strength max.: 500 radial slide travel: 1050 mmaxial slide travel: 1600 mmswivelling range milling head: +- 15 °table diameter: 1870 mmtable hole: diameter: 600 mmdepth: 875 mmtable load capacity - central/maximum: 30000 kgworkpiece: tip circle diameter: 440 mmroot circle dia. min.: 310 mmcutter width - max.: 120 mmtotal power requirement: 100 kWweight of the machine ca.: 37,5 tdimensions of the machine ca.: 12,3 x 5,6 x 4,4 mmachine can be used only for internal gears - dry cutting typeEquipment/accessories:- column increased- internal head IKF2- big clamping table- documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 130 mmgear width: 25 mmmax. module: 4 min. module: 0,5 Control: Siemens 840 Dstrokes - infinitely variable: 500-2500 Hub/minstroke: 30 mmwork-spindle diameter: 85 mmtotal power requirement: 49 kWweight of the machine ca.: 11,5 tdimensions of the machine ca.: 6,4x4,5x4,4 mCounterhold without centerhydraulically operated counter arm andLinear guides.For automatic ring loader, with 4 stations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1200 mmgear width: 1000 mmmax. module: 25/36 min. module: 1 Control: Siemens 840 D table load: 15 ttotal power requirement: 75 kWweight of the machine ca.: 24 tdimensions of the machine ca.: 6,5x4x3,75 mGleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical and worm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference.Remark:Machine designed for external milling, large milling head M3. Machine with counter stand.Scope of equipment:- Basic machine P 1200, Siemens 840D PowerLine (XP)- Motorised milling head M3- Special speed series motorised milling head M3- Extended software for fault diagnosis- Main stand - raised 1000mm - 2 x fume separator make 3nine type EMMA- Chip scraper conveyor - Set of adjusting wedges- Dialogue program Milling in single-part process- Switching the machi ...

Gear hobber sharpener Kapp AS 305 B  ... más información

max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 12 min. module: 0,5 total power requirement: 8 kWweight of the machine ca.: 4,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

1 CNC Gear Milling Machine Make: Gleason-Pfauter Model No.: P2001/3000 Year of manufacture: 1980 / Retrovit 2000 Largest milling diameter: 3000 mm Largest module: 32 Face plate diameter: 1920 mm Power main drive: 30 kw. max. workpiece weight: 25 tons. Equipment / Accessories: CNC control made by Siemens Internal gear milling head Setting Stick - Counter Holder Workpiece fixtures Interchangeable wheels various milling cutters various cutter mounts Conveyor

max diam 340 , max modul 8  ... más información

max. wheel diameter: 630 mmgear width: 410 mmmax. module: 8 min. module: 1 milling spindle speeds (infinitely variable): 62 - 390 U/minmax. milling cutter diameter: 192 mmcutter length max.: 258 mmtable diameter: 550 mmtotal power requirement: 16 kWweight of the machine ca.: 7,9 tdimensions of the machine ca.: 3,7 x 2,5 x 2,1 mChip conveyor, change gears, arbors, toolings.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max working diameter 660,4 mm Module max 16,9 Working width 106,7 mm Min. max no. of teeth 20 - 75 Machine weight 17700 Kg Equipped with Indexing discs Cutter heads Gauge Blade setting device  ... más información

The machine needs to install the new electric system Specification: Work table diameter 580 mm Gear diameter 630- 710 mm Gear width 400 mm Module range 1-10 Max. axial feed travel 400 mm Max. tangential feed travel 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed (indexing drive) 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of hole in table 100-250 mm Depth of hole in table 45-300 mm Distance center of hob to table 175-575 mm Distance center of hob to center of table 50-505 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds 40-400 rpm Axial feeds 0,2-10 mm/rev Tangential feeds 0,1-5 mm/rev Radial feeds 0,1-1 mm/rev Main motor capacity 29 kW Direct current 10 kW Machine dimensions 3380x2715x2250 mm Machine weight 9200 kg

max. wheel diameter: --- mmgear width: --- mmmax. module: --- min. module: --- Control: --- total power requirement: --- kWweight of the machine ca.: --- tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

max. wheel diameter: --- mmgear width: --- mmmax. module: --- min. module: --- total power requirement: --- kWweight of the machine ca.: --- tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

max. wheel diameter: --- mmgear width: --- mmmax. module: --- min. module: --- Control: --- total power requirement: --- kWweight of the machine ca.: 5,0 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

max diam 250 , max modul 5  ... más información

Gear hobbing machine STANKO 5B312 with change gears.  ... más información

Komsomolec 5K328A Gear hobbing machine Max. work piece diameter 1250 mm Max. work piece diameter with support 850 mm Table diameter 1000 mm Module 12 Max. table load 2000 kg Min. number of processed teeth 20 Max. length of processed teeth mm: - straight 560 - 30 degrees angle 400 Main drive power 10 kW Machine dimensions 3560x1790x2590 mm Machine weight 14000 kg

CNC GEAR HOBBING MACHINE LIEBHERR LC 3000 FN Year: 2010 Control : SIMENS 840D Table diameter: 2600mm Max. workpiece diameter: 3000mm Table hole: 700mm Max. table speed: 5 RPM Center distance with external cutter head: 210…2100mm Center distance with internal cutter head: 0…1800mm Workpiece load: 300kN Max. axial travel: 1200mm Cutter head swiveling angle: +/-45 degrees Original table size is 2000mm, but the factory made a new sub table and put it on top of the original table and used it. Including external milling head, chip conveyor. All manual books available. Low working hours. Excellent working condition.

CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent ...

max. wheel diameter: 180 mmgear width: 45 mmmax. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mmspindle taper: innen MK 4 table diameter: 160 mmtable bore diameter: 75 mmno. of strokes: 355 - 630 Hub/minfeed range: 0,008 - 0,4 mm/Hubdimensions of the machine ca.: 2,30 x 1,50 x 2,36 mpower capacity: 6 kWweight of the machine ca.: 2.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter - max. 320 mm Wheel width 50 mm Module - max. 7.5 Module - min. 2.1 Total power requirement 13 kW Machine weight approx. 7 t Space requirement approx. 1.7 x 1.9 x 2.7 m Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through-hole spindle pieces 78 mm. Dive max 20 mm. Cut feeds, infinitely variable 0.04 - 25 mm/min. Distance between taper tip/workpiece spindle... 100 - 345 mm. Distance between the centre of the cone and the cutter head axis 25 - 150 mm. Distance between the center of the taper and the milling head spindle... 80 - 220 mm. Max. ring wheel Ø at medium spiral angle... 320 mm. Max. gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer cone spacing approx. 170 mm. Rapid traverse 1.5 m/min. Roll feeds in minutes of angle... 0,3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, external 85 m ...