máquinas talladoras de engranaje usadas para la venta

external diameter: 108 mmbore diameter in mm: 32 mmwidth: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

external diameter: 278 mmbore diameter in mm: 80 mmwidth: 335 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

external diameter: 138 mmbore diameter in mm: 40 mmwidth: 109 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

external diameter: 220 mmbore diameter in mm: 60 mmwidth: 262 mmPWS DDR 9970E9 G 14/20° 4°20IIKB A (7362-43) 0°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

external diameter: 250 mmbore diameter in mm: 80 mmwidth: 287 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

external diameter: 160 mmbore diameter in mm: 40 mmwidth: 212 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

external diameter: 154 mmbore diameter in mm: 50 mmwidth: 150 mmB9/20° II 3°50oo 018The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

external diameter: 222 mmbore diameter in mm: 60 mmwidth: 287 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

external diameter: 278 mmbore diameter in mm: 80 mmwidth: 335 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

external diameter: 142 mmbore diameter in mm: 40 mmwidth: 156 mmMod. 10, Eingr ... más información

max. wheel diameter: 1200 mmgear width: ca. 800 mmmax. module: 25/35 Control: Simens 840 D PL workpiece diameter: 1200 mmHobbing approx.: 25 mmtooth form milling approx.: 35 mmaxial slide travel: 1000 mmtable diameter: 1200 mmtable bore diameter: 300 mmtable load: 15000 kgtotal power requirement: 110 kWweight of the machine ca.: 24,5 tdimensions of the machine ca.: 8,1 x 6,2 x 3,8 mEquipment/Accessoires:- Motor milling head M3 special speed series- Colum - increased 1. 000 mm- Clamping device- Dialogue program Milling in single-indexing process”- Telephone diagnostic system- swivelable counter bearing holder- measuring device- machine with counter steady- documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1200 mmgear width: 350 mmmax. module: 16 control: Sinumerik 840 D max. swing diameter: 1400 mmmax. table load: 15000 kgtable bore diameter: 300 mmtable diameter: 1200 mmtotal power requirement: 150 kWweight of the machine ca.: 24 tdimensions of the machine ca.: mWorkpiece with external gearingLargest modulus (in steel with approx. 600N/mm²) 16 mm- Maximum gear width 350 mm- Largest outside diameter 1. 200 mmWorkpiece with internal gearingLargest modulu (in steel with approx. 600N/mm²) 16 mm- Maximum gear width 350 mm- Maximum swing diameter 1. 400 mm- Maximum inner diameter 1. 200 mmTool- Maximum impeller diameter 260 mm- Stroke length 50 mm – 380 mmEquipment/Accessoires:Special version with hydraulic cutting head H1workpiece diameter:External gears 1. 200 mmInternal gears 1. 200 mmLargest workpiece swing diameter- without steady rest 1. 400 mmOil mist exhauster ...

max. wheel diameter: 20 - 2650 mmgear width: - mmmax. module: 32 distance between centres: 1850 workpiece weight max.: 10.000 kgMachine can be inspected under power.Setting-up and installation at the customers is possible against extra charges.Equipment / Accessories: - clamping table diameter 1100 mm - steady rest - clamping devices - carriers - levelling shoes - hardware updated to Windows 7 - gears / straight and helical - internal and external gears - measuring of tool cutters (grinding wheels, shaving cutters, milling cutters)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2400 mmgear width: 600 mmmax. module: 30 Control: Sinumerik 840 D workpiece external diameter max.: 3400 rim strength max.: 500 radial slide travel: 1050 mmaxial slide travel: 1600 mmswivelling range milling head: +- 15 °table diameter: 1870 mmtable hole: diameter: 600 mmdepth: 875 mmtable load capacity - central/maximum: 30000 kgworkpiece: tip circle diameter: 440 mmroot circle dia. min.: 310 mmcutter width - max.: 120 mmtotal power requirement: 100 kWweight of the machine ca.: 37,5 tdimensions of the machine ca.: 12,3 x 5,6 x 4,4 mmachine can be used only for internal gears - dry cutting typeEquipment/accessories:- column increased- internal head IKF2- big clamping table- documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1600 mmgear width: 457 mmmax. module: 12,5 min. module: 2 spindle bore: 222 mmstroke: 15-120 Hub/minroll feed: 0.3 - 0.84 mm/mindown feeds: mm/Hubelectrics - voltage/frequency: 380 / 50 V/Hztotal power requirement: 10 kWweight of the machine ca.: 20 tdimensions of the machine ca.: 3,5 x 3,3 x 2,5 mEXTERNAL GEARS:Blank diameter:- Max 63 1600 mm Min 0 0 Face width, double helical 0 - 18 0 - 457 mm Face width, spur or single helical 0 - 10 0 - 254 mm INTERNAL GEARS: Blank diameter:- Max 66 1676 mm Face width 0 - 8 0 - 203 mm P.C.D.:- Max 66- (2 x rim thickness) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 250 mmgrinding length: 500 mmthread pitch: - mmtread diameter: 2 mmclamping length - spindle head right: 900 mmspindle bore: 66 mmclamping length - spindle head left: 1020 mmworkpiece weight: 200 kgpitch: 0,8 - 288 mmpitch angle: +/- 40 °workpiece turning speeds: 0,4 - 50 U/mingrinding wheel width: 8/13/16/20/30 mmtable feed: 1500 mm/mingrinding spindle speed: 1900-2450 U/minno. of feed: 12 max. thread profile: 12,5 Modulnumber of starts: 1 - 8 dia. of hole: 160 mmgrinding wheel diam. min/max.: 275 / 350 mmgrinding motor: 16 kWelectrics - voltage/frequency: 3 x 380 / 50 V/Hztotal power requirement: ca. 20 / 45 kW / KVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 5,7 x 4,7 x 2,6 mprofiling device CNC: CNC controlled Thread & Worm Grinding Machine equipped with:- CNC control Grossenbacher AG / Reishauer modell FMS 6- CNC profiling device IBH with hand contr ...

max. wheel diameter: 400 mmgear width: 200 mmmax. module: 10 min. module: 1 profile depth: 25 mmx-axis: 630 mmy-axis: 400 mmz-axis: 190 mmU-axis: 80 mma- axis: 360 °b-axis: +/- 30 °max.helical angle: 30 °grinding wheel diameter: 250 - 350 mmspindle speeds (infinitely variable): 1500 - 2800 U/mingrinding slide feeds: 6000 mm/mincenter distance betw. workpiece-tool min/max.: pitch max.: 9000 mmpitch min.: 10 mmelectrics - voltage/frequency: 380 / 50 V/Hztotal power requirement: 38 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 4,2 x 2,6 x 2,8 mhorizontal Profil Gear Grinding Machine for Spur and Helical External Gears.Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor Wheels. Equipped with:- CNC Control FANUC 0i-MF-- for 6 Controlled Axis (4 simultaneously)- Gear Measuring System- Chip and Sludge Removal System- Paper Band Filter and magneti ...

max. wheel diameter: 1600 mmgear width: 250 mmmax. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mmbase circle dia. - min.: 150 mmspecimen weight from/to: 4000 kgfeeler adjustment movement - parallel: 1400 mmmax.helical angle: 0 - 90 °wheel diameter with counterstay: 1000 mmfeeler adjustment movement - parallel: 800 mmcentre height: 1150 mmelectrics - voltage/frequency: 400 / 50 V/Hzdimensions of the machine ca.: 2,8 x 2,4 x 2,3 mtotal power requirement: 2 kWweight of the machine ca.: 3 tUniversal Involute and Helix Testing Machine - modernized 1995Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping andshaving cutters. Following tooth data can be t ...

max. wheel diameter: 3000 mmgear width: 1200 mmmax. module: 30/40 min. module: 2 table diameter: 2500 mmtable load capacity: 400 kNhob dia. - max.: 450 x 500 mmmilling spindle speeds: 10 - 165 U/minhob length max.: 500 mmtip circle diameter: 2050 mmtooth helical angle min/max: 0 - 45 °center distance betw. workpiece-tool min/max.: 150 - 1750 mmmilling slide swivelling: 50 Graddistance table / counter stay: 1050 - 2050 mmshifting: 300 mmworkpiece weight: 40 ttable bore diameter: 800 mmdepth of hole: 1100 mmmain drive motor: 37 kWmin. workpiece diameter: 290 mmmin. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/minradial feed: 1 - 500 mm/minfeed: Tangential 1 - 450 mm/minrapid traverse: 1875 / 530 / 470 mm/minelectrics - voltage/frequency: 380 / 50 V/Hzcontrol: Siemens Sinumerik 3M total power requirement: 125 kVAweight of the m ...

max. wheel diameter: 3000 mmgear width: 500 mmmax. module: 25 / 40 spindle turning speed range: 250 U/minfeed speeds: max. 4000 mm/minfaceplate diameter: 2000 mmtable bore diameter: 700 mmtable turning speeds: 51 U/minpower capacity - milling spindle: 53 kWdrive motor for milling spindle: - kWaxial adjustment: 1200 mmmilling head swivable ca.: +/- 45 °control: Siemens 840D total power requirement: - kWweight of the machine ca.: 55 tdimensions of the machine ca.: - m- CNC Control Siemens 840D- Internal Hob Head IFK- External Hob HeadThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.