subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 1200)
ERSA HOTFLOW - 7 Continuous Dryer / Tunnel Dryer / Belt Dryer Type: HOTFLOW – 7 Convection oven as tunnel dryer / belt dryer / continuous dryer for Drying of panel materials on the top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling rods at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Nominal power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power 67 KW Year of construction 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (Without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm The machine can be used as a soldering oven – soldering machine – reflow oven with little effort. ...
This evaporative dryer was built in Hungary by DKG-EAST RT in 1995. The equipment was transported to Finland, where it was inspected by Finnish Inspecta in 1999. The original purpose of this equipment was to concentrate waste water solution from a molasses production process by evaporating water, but the system was never installed. The certified pressure for the equipment is max 2.0 bar, min -1.0 bar. The input heat for the evaporation comes from steam of 200 °C. The equipment is suitable for similar purposes, concentrating waste water streams from various processes and thus reducing the amount of waste water to handle. Capacity in molasses wash water evaporation: Input of thin stillage: 30.0 t/h, 8.5 % Output of product stillage: 3.54 t/h, 72 % Steam input: 3.9 t/h, 200 °C, 11018 MJ/h Heater 1. Price 90.000 € Nominal heat surface 512 m², actual heat surface 518 m². Max ...
Watson-Marlow Bredel SPX25 Hose Pump Condition: Unused Shipping weight: 120 kg Dimensions: 100x75x65cm WxLxH Bredel high-performance hose pumps handle abrasive sludge, paste-like materials and slurry with 100% volumetric accuracy. Unlike diaphragm, lobe, and progressive cavity pumps, moving parts do not come into contact with the product and there are no mechanical seals in the pumps. The pumped liquid is entirely contained within a long-lasting hose, preventing the user from coming into contact with chemicals, sludges, and slurries. Each Bredel hose is precision machined to ensure flow stability and pump performance in demanding fluid handling applications.
6 pieces Chemistry Standard Pump CNN 125-100-315 / ISO 2858-EN 22858-ISO 5199, in stainless steel 1.4408 / process design, 119 m3, FH 25 m, 15 KW, unused with documents and replacement mechanical seal ... más información
Discharge and dosing valve, type AL 200 in stainless steel 1.4408 (ASIS 316) Volume 5.5 ltr./rev, SEW direct drive 24 rpm / 0.55 kW / 380 V ... más información
Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.
Offered is a refurbished rotary lobe blower brand: RKR / Robuschi type: RBS 85. All our refurbished blowers are fitted with new bearings and sealing elements. If you have any questions, please feel free to call. ... más información
Offered is a refurbished rotary lobe blower Brand: RKR / Robuschi Type: SRB 60. All our refurbished blowers are fitted with new bearings and sealing elements. If you have any questions, please feel free to call. ... más información
The fan speeds are reconditioned, can be supplied as a complete unit. ... más información
The fan speed is refurbished, can be supplied as a complete unit. ... más información
The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call. ... más información
The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call. ... más información
The blower is refurbished and can be supplied as a complete unit. ... más información
The rotary piston blower is general-outdated. of the blowers is also to be had with impulse. ... más información
The fan speed is refurbished, can be supplied as a complete unit. ... más información
The blower is with side admittance completely with impulse. ... más información
The starting relief and safety valves are available in various sizes. ... más información
Fig.1 screen master 2000 Regulating, control and recording device was used in a dairy to control and record the milk heater. ... más información
UHT Pilot Plant / Tube Heater Power: approx. 100 ltr./h - Tube heater - 2 process tanks of approx. 70 litres each - High pressure homogenizer APV LAB 100 - PWA cooler ... más información