máquinas e instalaciones para la ingeniería de procesos usadas para la venta

- fully functional - was used until recently by an automobile manufacturer - with integrated brake maintenance device ROMESS S22 - Visit by appointment Use: - Testing of brake squid to function Pruef features: - Geraeusche at beta-ether - Tightness in the vacuum range - Tightness in the brake pressure circuits - Uniform pressure distribution in the brake circuits - Pressure build-up in the brake circuits Operation: - The testing is performed "by hand" - The pressure build-up takes place via a deflection mechanism - Manual setting of the vacuum - Filling of the brake device by means of a built-in Romess system and simultaneous disenification of the brake circuits, 33eflt0hx - Extraction of the brake fluid from storage equipment by means of Romess Plant Building: - Stationaerer Pruefplatz - Profile frame construction - Tueren with Mangnet stop - Drawers for a ...

Offer Centrifuge SZB0 1000C 960 1/min 6 loads/h for separation of Plastiso and Parex Photo 1-9 The centrifuge was part of a wallpaper production line. After cleaning the tools, it is used to separate the plastisol from the parex. Manufacturer: VEB Chemieanlagenbau Staßfurt Maschinfabrick Sangerhausen Type: SZB0 1000C Ref. 5604 Year of construction: 1986 Speed: 960 1/min Load: 145 kg Internal volume of the drum: estimated 200 liters Max clearance: 6 loads/h Power supply: 380V 3~ 50 Hz 5.5kW Weight: 1660kg Condition: used, stored, worked until siling and on 7 Paint mixing buckets Mixing tank Agitator tank Drais 300 l Photo 10-12 The paint mixing buckets were part of a wallpaper production plant in Halle and were used as accessories to the Drais paint mixing plant type RN 218 (sold). Technical data (partly estimated or from comparison plants): Manufacturer:  ...

MICRONIZER JET MILL MC One Technical Data Nominal Estimated Batch size Process gas Process gas Installed diameter capacity 7 bar 12 bar power 33 mm From 0.1 From 0.2 gr 0.09 Nm3/min 0.18 Nm3/min _ (1.3 inches) to 50 gr/hr to 50 gr (3.18 CFM) (6.36 CFM)  ... más información

2 centrifugal pumps / self-priming Type: KSP 50 /150-2.3 Manufacturer: KPA Artern, Germany Capacity: 10,000 l/h Speed 1,420 rpm. Connections: Inlet NW 50 / Drain NW 50 Material: Stainless steel Medium: beer, wine, milk, etc. Connection: 380 V, 2.2 KW Weight: approx. 43 kg Dimensions: 50 x 30 x 35 cm Technical condition: refurbished

Lödige ploughshare mixers (unused) Stainless steel Brand: Lödige Type: KM 1200 DW Power requirement: 55 kW motor. Incl.: Water injection system Stock: 2 pieces. FR: Lödige Malaxeur à socs de charrue (inutilisés)  ... más información

Fan Drive: 22 kW  ... más información

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coars ...

Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the ...

Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) t ...

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or p ...

Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mi ...

Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulu ...

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide wit ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used universal fine impact mill Hosokawa Alpine 315 UPZ. This turbo mill is able to pre-cut and produce medium fine products. Can be fitted with different grinding tools in order to adapt to each specific grinding needs. This mill is suitable to process many different products for all kind of industries, like minerals, chemicals, food, etc. Material of construction: stainless steel  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Micron B.V. Vrieco Nauta Minimix stand alone lab mixer machine. A miniature stand alone plug-and-play processing plant for the small scale processing of small batches of just a few grams, perfect for the laboratory or R&D projects. It allows to test or produce material a reduced scale. The Nauta Minimix is a gentle conical screw mixer, specially developed for R&D work ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Micron B.V. Vrieco Nauta Cyclomix lab mixer. A miniature stand alone plug-and-play processing plant for the small scale processing of small batches of just a few grams, perfect for the laboratory or R&D projects. It allows to test or produce material a reduced scale. The Mini Cyclomix lab mixer is a stand-alone, high shear batch mixer with exchangeable product bowls,  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used universal fine impact mill Hosokawa Alpine 250 UPZ. This turbo mill is able to pre-cut and produce medium to fine products. Can be fitted with different grinding tools in order to adapt to each specific grinding needs. This mill is suitable to process many different products for all kind of industries, like minerals, chemicals, food, etc. Material of construction - product con ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery This used wet agitated ball mill Alpine 132 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close ci ...