sierras usadas para la venta

Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg

max. cutting width : 5300 mm max. cutting height : 2200 mm Saw blade diameter : 300 mm max. machining thickness : 80 mm Saw blade bore : 30 mm Swivel saw head : manual Saw feed : manual Saw blade speed : 4750 min-1 Slatted frame: evasive Mounting : freestanding Suction : external suction Locking saw beam : manual Weight approx. : 1200 kg

Parcel cross-cut saw 6,00m similar. PRINZ HOLTEC electric length adjustment and saw feed, immediately available, ready to use! fully functional, fully operational, partially dismantled; Model: Cross-cut saw from Haskin AB, Swedish manufacturer; many parts are identical in construction to PRINZ systems - Year of construction: approx. 1996 - Max. package length: 6.00m - Dimensional tolerance: +/- 2 mm - Max. package dimensions: 130cm x 130cm x 6000mm - Hydraulic length adjustment for saw positioning - Hydraulic cutting feed (up, down) - Length adjustment with digital display to 1/10 mm (mm) - kerf width can be stored as offset value (kerf is included!) - Feed of the length positioning (FORWARDS/BACKWARDS) is infinitely adjustable depending on the direction (!) - Cutting feed/speed of the saw blade (UP/DOWN) is infinitely adjustable in each direction (!)  ...

Festo Jigsaw G&-5078-M36LJ  ... más información

SAeGEWERKS MECHANIZATION MAYRHOFER IN TOP STATE Gate roller with pull-off with hydraulic lifting and vertical lyrical rollers with chain pull puller left and right with hydraulic unit and frequency roller gear 10 m long roll width 1.60 m table width 1.70 m roller drive electric SAFETY AT THE MACHINE PURCHASE NO good

Used ALTERDORF sliding table saw mod. F45 Serial number 07-08-10-142 Electronically controlled two-axis adjustment for tilt and cutting height with automatic gradage-dependent blade height correction Digital Rip Fence Viewer Maximum carriage stroke mm 5000 Maximum cut at the square fence mm 4420 Maximum tilt from 0 to 45 degrees Machine without engraver Maximum cut at rip fence mm 1350 Maximum blade diameter mm 550f Engine power 15 hp N. 3 blade rotation speeds: 3000/4000/5000 rpm Maximum cutting height 200 mm at 90 degrees Maximum cutting height 139 mm at 45 degrees Year 2007 EC

SPECIFICATIONS: Equipment: Motorized loading roller conveyor Motorized roller stroke Slide arm with 7 pneumatic grippers Panel saw with a cutting width of 4500 mm Door pad on felt-covered platforms Sliding arm with 8 pneumatic grippers, connected by a continuous rod Lateral alignment device Panel saw width 2500 mm Vibrating chute for picking up and removing waste Shredder WEIMA model WLH300, built in 2007, motor 18.5 kW Unloading gantry 3ERRE AUTOMAZIONI model 1131, built in 2007 - length approx. 13000 mm Pneumatically operated mechanical gripping unit Motorized roller conveyor width 1700 mm length 4000 mm Side stop with idle rollers, side aligner, retractable front stop Motorized roller conveyor, width 1600 mm, length 5000 mm, concealed front stop 2 motorized floor roller conveyors, width 1600 mm, length 5000 mm 4 floor roller conveyors, width 900 mm, length 5000 mm ...

Code: 0224 Brand: SICAR Model: TOP/8 - CE Standard Band saw with covered wheel for cutting wood, plastic, aluminium, composite materials and various - CE Standard Technical data Flywheel diameter mm 800 Blade length mm 5620 Motor power Hp 5,5 Table dimensions mm 1110 x 710 Height cutting capacity mm 360 Suction mouth diameter mm 110 Overall dimensions mm 1360 x 770 x 2400 Weight kg 505

Code: 0783 Brand: MZ PROJECT - ITALY Model: TWIN 800 Double-blade band saw for cutting solid wood rough boards and other irregularly shaped materials with defects (furniture, garden furniture, gun handles, sporting goods, toys, chairs and tables, packaging) Technical data: Flywheel diameter mm 800 N° 2 motors each Hp 5,5 Left and right blades tiltable +/- 45 degrees Adjustable hydraulic carriage feed Opening adjustment between blades by handwheel Overall dimensions of assembled machine mm 4000 x 2300 x 2450 h Overall dimensions for transport: 2 packages - mm 2000 x 2300 x 2300 h + mm 2000 x 900 x 1100 h Weight kg 1600

Code: 0068 Brand: GIBEN Model: STARMATIC 850 - CE Standard CNC Horizontal panel saw with clamps for cutting wood panels, plywood, furniture, composite materials, sandwich panels, plastics and various materials - CE Standard Technical data: Useful cutting length 4500 mm Automatic pusher with lateral upper guides, electronically controlled, complete with 6 pneumatic clamps- Clamps opening 117 mm - Pusher stroke 4550 mm Max blade projection 85 mm Max main blade diameter 360 mm Main blade motor 7,5 kW - Rpm 3827 Max scoring blade diameter 160 mm Scoring blade motor 1,1 kW - Rpm 8290 Scoring exclusion with choiceor Quick tool removal (Pneumatic) Automatic adjustment of main blade overhang according to stack height Adjustment (lateral and in height) of outside scoring unit Blade carriage translation by brushless servomotor Blade carriage feed speed 1-80 m/min Blade car ...

Description 0043-664-2803850 Specifications: Cutting depth 85 - 165 mm Cutting depth at 45° 60-116.5 mm Cutting depth at 60° 42-82.5 mm Swivel range 0 - 60° Idle speed 1500-1800 1/min Rated power 2,800 W Weight 15.3 kg Suction connection 58mm Description: The carpentry hand saw with exceptional weight/performance ratio! This is only possible through the use of state-of-the-art magnesium die-cast alloys. Swivelling up to 60°, this makes the hand-held circular saws a universal partner. The easy-to-read scale on the rotary wheel of the cutting depth adjustment makes the work easier and saves annoying remeasurement. For optimal handling and better control, the carpentry circular saw is equipped with soft start, constant speed under load, speed reduction and overload protection. The easy-to-use stop system of the MKS and the adjustable suction nozzle make your work m ...

Automatic multi-platform saw with leaf adjustment and part back conveyor Neumann Type: MRF 16/4.000: Technical data: Follow later!  ... más información

Automatic optimization crosscut saw: Technical data: Follow later!  ... más información

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...

EWD ESTERER HD_30 SVhigh in TOP ZUSTAND ! Repairs 2009, with powerPos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mmspeed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: rightpressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaetter, ...

Pruning saw for removing defects from wood TechnologieCNC Optimizer CROSS CUT 306 4000mm Description/name of the machine: Sawing saw for removing defects from wood Manufacturer: TechnologieCNC Model: CROSS CUT 306 4000mm Optimizer Year of production: 2023 CROSS CUT 306 Optimizer 4000mm Saw 4 Meter Feeder A professional machine for removing defects from wood and wooden elements. It optimizes the cutting process and ensures minimal material losses. The CROSS CUT 306 optimizer is a new technology of woodworking machines, produced by the leading brand on the Polish market, which is CNC Technologies. The machine provides fast, simple and precise cuts to size, increasing production efficiency. The optimizer performs a transverse cut of the material into sections of a certain length with the elimination of material defects marked with a fluorescent crayon and with the help of a s ...

Format and trimming circular saw model F 90 foot hydr. Stroke, cutting length 4200, year of manufacture 89  ... más información

Double Gear Circular Saw Model SD 13 Cutting Length 3300 Year 86  ... más información

Pendulum saw model EP 125, motor 3 KW, left and right roller conveyor each 2500 mm, year of manufacture 95  ... más información

Saw blade swivel: 45 °, carriage length: 3200 mm, cutting width: 1300 mm, motor power: 5.5 kW, saw blade diameter: 450 mm, machine weight, approx. 1000 kg, scoring unit, motor brake, eletr. Dissimulation.  ... más información