fresadoras usadas para la venta

SPECIFICATIONS: Pantograph with floating milling head Engine power: HP 5.5 06 adjustable stops Speed 9,000-18,000 rpm Vertical Stroke  ... más información

Working size 420x280x60cm With 4 spindles head  ... más información

Finger jointed line Grecon Ultra - Made in Germany - year of production 2001 - for softwood and hardwood -DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm element width min/max 40/205 mm height min/max 20x80 ratio min. length / max. width 2:1 initial length min/max 3000/6100 mm disc motor power 5.5 kW blade spindle diameter 30 mm cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min stub diameter 250 and 100 mm extraction requirement 6150 m3/h 30m/s transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

BALLISTRINE- C 70 N- auto feed thru (2) sided shaper(2) 10HP; 3PH spindle motors • (2) 30mm diameter spindles with 5in. under the nut • Spring loaded floating spindles • In-feed and out-feed rubber covered upper feed rollers • Working width 14.4in. (360mm) max • Working height 4.8in. (120mm) max • Min working length 9.6in. (240mm) • Spindle 8,000 RPM • feed 3 to28..Price-$8,900

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800  ... más información

HELMA- model CF-40-copy milling/shaping machine feed thru with work piece return (2) milling spindles- 18" max. distance between the spindles centers- 28" x45" Table - (2) 30mm. work spindles- 10,500 RPM spindles- 4"max. cutting height - vertical adjustment 10 mm.- (2) 7 1/2 hp. spindle motors - 1/2hp. variable speed feed motor 5' to 30' per min.- 2,200 lbs. $7,500

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Pantograph SCM R8, manual, reach 800mm Not to CE standards, for export  ... más información

Used OMP chain quarrying machine  ... más información

Spindle moulder SCM model T130N: – 1200 x 730 mm worktop – FAST sector plan, instead of rings – shaft D=35mm – Motor power kw 5,5 / HP 7,5, volt 380 – 5 shaft rotation speeds: 3000/4500/6000/7000/10000 rpm – adjustable spindle moulder cap – complete with 3-wheel driver Machine according to CE regulations

Protective cover for milling curved parts on the ring etc. This protection device is often recommended by the BG. Maximum milling cutter diameter 160mm With thrust ring, brushes and brake wedge for the inrun bearing Obviously hasn't been used much so far. Year of construction unknown The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI  ... más información

Precision Shaper fence for cutting tool to Max D = 250 mm with fine adjustment The locking bolt hole spacing: 330 mm Diameter extraction: 120 mm with Multieinstellsystem with safety rulers: L = 500 mm, 155 mm high  ... más información

WJ-F102-1150 Mill: swivel 90-45 Spindle speeds (6 steps) 3000/4000/5000/6000/8000/10000 rpm Sliding table:1150mm (Optional 1600mm) M?o?t?o?r?l?i?i?t?u?n?g?: 400V 3 kW (4.0 hp) max. clamping height: 125 mm Table opening: 270 mm max. tool diameter retractable: 260 mm Options at extra cost: Telescope 900mm Eccentric tensioner Milling motor 4 KW (5.5hp), S1 100% Milling motor 5.5 KW (7.5 hp), S1 Milling spindle 40.50 or 60mm Integral safety rails 500mm Right and left-hand running milling cutter Table extension right/left

Engine power: 400V 3 KW 4 HP, 2 engines Formatschiebetisch: 1500mm Cutting height: 103 mm Blade: swivel, max. 315 mm Milling cutter: starr 90° Blower rpm: Rpm: 1500/3500/6000/8000 RPM. WJ-400100 K NET 2990,-new  ... más información

Cast iron spindle moulder saws with: - side trolley for tenoning, on pole and with flag support, with tilting guide and useful stroke of about 1500mm - Saw unit for tenoning - Spindle moulder hood with AIGNER guides - with 3-wheel drive Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

Milling machine for connecting drawers OMEC 750 The machine is designed to make connections min. drawers, boxes The operator sets two components at the same time, then the machine Automatically mills along the entire length Spindle on eccentricity Milling motor power 1.1 kW Spindle speed 18000 RPM Two speeds of 25 and 35 n/-1 Machining parameters: Front thickness: min/max: 7/60 mm Sidewall thickness: min/max: 10/30 mm Key height: min/max: 6/18 mm Machine dimensions: 1300x700x1200h mm Machine weight: 400 kg

Spindle tenoning machine SCM T130 Motor power 7,5kw Machine control from puplite Electric spindle setting Sidecar for trunnion Total spindle height 200mm Spindle diameter 40mm Variable rotation on the belt Spindle speed 3000/4500/6000/7000/10000rpm CE Certificate Extraction nozzles 2x120mm

I am selling an Automatic CNC Machining Center for BLOCK-HOUSE production AUER BL100. Built in 2001. Entrance table / max. element length 9.00m Trunnion cutter up to dia.200mm / 4kW Horizontal milling machine up to dia.200mm / 4kW Vertical milling machine up to dia.200mm / 4kW Automatic feed system AUER Austria BL100MS Programming Zebra Label Print TOS Svitavy PWM 45.11 End-cut Saw Rear Favorable for timber constructions! Available soon.

Finger jointing line "GreCon Dimter" (WOLK) Technical specifications: Semiautomatic finger-jointing line,including: milling unit with automatic feed, automatic gluing unit. Transporter between milling unit and hydraulic press. Overall dimensions, mm - 10000х2500х1800 "Machine weight, kg - 5,500 " Productivity, m³ / h - 3 Details height, mm- 22-58 Details length, mm-170-410 Year :2015