Fabricante:
(Categoría: 202)
Used milling machine Int. Art. Ref. m3458 Manufacturer: SAMCO Type ROUTER Projection 500 mm Speeds 10,000-20,000 rpm. Power 1.5/2.2 kW Vertical run of the spindle 80 mm Height increase of the table 150 mm Weight approx. 210 kg Pneumatic lines are new Electrics checked, connection cable new Location: 59425 Unna The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The go ...
You can call or write to us. We can speak and write German and Russian. You can also send messages in English ... más información
Long tables The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. ... más información
20 copy cells You can purchase the cutter together with the forming press. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English. We also have a lot of machines in stock. ... más información
BUTT END REDUCER consist of cone roller (8 m) with log turner, Cross conveyor 4 strings, butt end reducer (motor 50 kW) steper to feed... ... más información
Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm from the root and Length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm Neukv Roller chain driver: gear reductior transmission motor of 2.2 kW hydraulic unit 5.5 kW Total weght including main motor 5000 kg
Door lock milling machine Three separate motors are available for machining the lock body Horizontally and vertically adjustable for different locking systems You can call or write to us. We can speak and write German and Russian. You can also send messages in English 12.6.1. ... más información
Cut Mill automatic feed You can call or write to us. We can speak and write German and Russian. You can also send messages in English 10.1.6 ... más información
Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130 ... más información
SPECIFICATIONS: Table size mm: 2540 x 740 Spindle diameter mm: 35 Spindle inclination: 0°-45° Speed: 3000/10000 rpm Voltage: 3800 volts Equipped with: - Electronic programmer for spindle stroke and spindle inclination - 4-roller feed ... más información
Kettenstemmer (chain Mortiser) carpentry: â?¢ handy Kettenstemmer with strong pulling engine â?¢ Adjustable depth stop to 125 mm â?¢ Adjustable RIP fence 25-180 mm â?¢ Chain guide with integrated lubrication â?¢ Housing, handles and base plate made of sturdy die-cast aluminium â?¢ Security Beidhandschalter for the protection of the user â?¢ Including high-quality chain set Technical specifications: â?¢ wattage 1350 Watts â?¢ Idling speed min-1 3,400 â?¢ Maximum mortising depth 100 mm â?¢ Press width 40 mm â?¢ Dimensions 261 x 320 x 382 mm â?¢ Weight 10 kg Scope of delivery: â?¢ power cord 5 m â?¢ RIP fence â?¢ Open end wrench â?¢ Allen key â?¢ Chain set (sword, chain, grea ...
) Mortising depth 100 / 150 mm-) nominal no load speed 1/min - 4050) rated power 2500 W-) weight 8.7 kg-) universal motor 230 V / 50 Hz transverse stop best. No. 200954 1 Allen key 4 mm best. No. 093074 1 Allen key 8 mm best. No. 093070 1 connection cable 10 m best. No. 087612 â?¾Zapfenlöcher â?¾Materialeinsatz such as: Solid wood, laminated wood â?¾Ergonomische handle and switch arrangement - for safe, efficient and energy-saving work. â?¾Geringes weight - ideal for use on construction sites. â?¾Extrem powerful motor - for high efficiency and saving time. â?¾Einzigartiges light-weight 8.7 kg. â?¾Der long cross fence holder with large adjustment range allows you to work on large-scale wood. â?¾DAS clamping system in the LS 103 EC allows a quick chain change. Even a tighten ...
Kervenfräse (carpentry): The machine is almost as good as new, and there is also a warranty on the machine! Technical data "MAFELL Kervenfräse ZK 115 EC": -) Smoothing depth: 0-83.5 mm ) Milling tool - standard: 150 x 115 mm mm -) Swivelling range: 0-60 ° -) Nominal no-load speed: 4050 1/min -) Rated power: 3000 W ) Weight (with standard milling head): 21.1 kg ) Universal motor: 230 V / 50 Hz Scope of delivery: 1 Kervenfräskopf, complete, Ã? 150 x 115 mm 1 RIP fence 1 spanner 10 mm 1 wrench, Torx T-15 1 connection cable 10 m
Code: 0650 Brand: OMEC - ITALY Model: 750 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and different parts of furniture - CE Standard Technical data: Working width mm 480 Drawer front parts thickness mm 60 Spindle speed rpm 18500 Spindle motor power Hp 1,5 Tip translation motor power Hp 1,5 Overall dimensions mm 1200 x 800 x 1300 h Weight kg 350
CNC milling machine 6090 INDUSTRY 2.0 600x900 ✅ Discover the quality benefits of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ✅ The INDUSTRY 2.0 series CNC milling plotter with a working surface of 600x900mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Standard equipment ✅ Hybrid table, i.e. vacuum, enabling non-invasive ...