cepilladoras usadas para la venta

Four-sided planer Weinig Hydromat H25N with feeder 100 m/min - German production - hydraulic feed up to 100 m / min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 bottom spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 bottom spindle 7.5 kW 8 x universal spindle 1800 7.5 kW infinitely adjustable feed rate up to 100 m/min feed pump motor power 22 kW nine rollers in the pulling countertop, three of which in front of the first head seven steel pulling upper rollers four upper rubber pulling rollers pneumatic clamping 1-6-7 spindle joint automatic countertop lubrication feeding table 3000 mm Speed adjustable smoothly up to 100 m/min two upper pneumatic rollers six bo ...

Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg

-Exhibition machine-new exhibition machine ... más información

Moulder WEINIG model PROFIMAT 23 (260×180) FORTEC, in configuration for carpentry / lamellar processing: – useful working measures 260x180mm – electronic control of 2 axes, SIEMENS programmer SIMATIC OP7 – gimbal towing and differentiated pneumatic pressure – variable feed speed 5 – 24 mt/min – feed motor KW 4 – HP 5,5 – upper feed group before the 1st shaft – lower feed group after the 5th shaft – machine top with air film – short 1050mm entry plane – foot lubrication pump – protection cabin – shafts D=40mm at 6000rpm – complete with tools D = 120mm - Z = 2 Trees: 1- under kw 11 – hp 15 2- Right 3- Left (right and left with single engine kW 11 – HP 15) 4- above kw 11 – hp 15 5- under kw 7,5 – hp 10 Machine according to CE standards

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Weibert WJ-D63 Thickness planer Planing width of 630mm 4-reversible knife shaft planing shaft D=125mm Knife shaft speed 5000 min/1 Thickness passage, min/max mm 3 to 300mm Motor planer shaft 9,5 KW 400V 50HZ Motor for electronic height adjustment of the thickness table with digital display Motor for feed 1.5 KW (2 HP) Max. chip removal of 8mm Passage height from 3-300mm Feed speed from 5 to 21 m/min. Suction nozzle of 160mm Machine table, planer shaft bearing block and table guide made of cast iron! External dimensions L=900 W=1120 H=1145 mm Total weight 1100kg G&WJ-D63 Optional spiral planing shaft G&WJ-D63-SPIRAL

JPT-310 Dressing-thickness planing machine Planer width:310mm Planer shaft:3-strip knife Engine Power:230/400V 4.7 HP Passage height:3-225mm G&JET-10000290T  ... más información

SCM Topset XL planing and molding machine for four-sided planing and profiling of wood with CNC-controlled spindles and SCM T-Set quick release nuts., working width: 240 mm, working height: 120 mm, spindles: 7, spindle 1: Bottom / 7.5 kW / 8,300 rpm, spindle 2: Right / 11 kW / 8,300 rpm, spindle 3: Left / 11 kW / 8,300 rpm / CNC, spindle 4: Right / 11 kW / 8,300 rpm / CNC/, spindle 5: Top / 11 kW / 8,300 rpm / CNC, spindle 6: Below / 7.5 kW / 8,300 rpm / CNC), spindle 7: Universal / 7.5 kW / 8,300 rpm, feed: 5,5 kW, control: Control 100 PC Plus, table rollers: Driven table roller in the outlet, spindle diameter: 40 mm

Straightening planer AF 3 E Product name: Planing machine Manufacturer: Julius Lindner & Co. Görlitz Type: AF 3 E Year of construction: 1966 Machine number: 3420 Condition: used, cleaned, completely refurbished and checked! Technical details: • Machine dimensions (L x W x H): 1,480 x 300 x 770 mm • Table size (L x W): 1,480 x 700 mm • Knife shaft speed: 5,400 rpm • Number of knives: 2 • Weight: 400 kg • Suction nozzle diameter: 120 mm Engine data: Voltage: 380 V Power: 1.5 kW Speed: 2,870 rpm The machine has been completely refurbished. The flat belt, the motor circuit breaker, the supply lines and the motor were renewed. Furthermore, a connection for an extraction system was retrofitted. Price: €1,250.00 (EUR) plus VAT ex Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!)

Profimat 22 n 5 spindle  ... más información

SCM thickness planer S 52 Product name: Thickness planing machine Type: S52 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: Condition: Used Technical details: - Work table size: 520 x 850 mm - Working width: 520 mm - Chip removal max.: 8 mm - Passage height min.: 3 mm - maximum planing height: 230 mm - Knife shaft diameter: 120 mm - Planer shaft with 4 pieces of Tersa knife - Sectional pressure roller - Knife shaft speed: 4,500 rpm - Feed speed for thickness planing: 6 -10 - 13 - 17 m/min - Table lift motorized and fine adjustment by hand - numerical display of the table height - Deliverable pull-out roller in the thickness table - 2 Aigner mounting rails (1x input table, 1x output table) - Weight: 600 kg Engine data: - Voltage: 380 V - Current: 12 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,900 rpm The machine was completely refurbished  ...

Planer SCM F520 CE Working width 520mm 4kw motor 4-knife shaft Traditional knives Hydraulic raising and lowering of the worktop Main sampler adjustable at an angle up to 45 Length of table tops 3000mm CE Certificate  ... más información

Planing width 410 mm Xylent Shaft Electric thickness table lift with digital display AVAILABLE FROM STOCK  ... más información

Planer, dresser, planer with circular sawVEM, ELECTROPLATING LEIPZIGPlaner: Type EH 125max. planing width: 125 mmWorking table: 620 x 125 mmWorking height: 780 mmCircular saw: Type KSmax. cutting fee: 35 mmmax. saw blade diameter: Ø 200 mmwork table: 330 x 240 mmWorking height: 840 - 880 mm (adjustable)Motor: Type ES 1600,45 kW3000 rpm220 V 1AC50 Hzused, tested !Dimensions 660 x 620 x 900 mm

Technical data (subject to change) Working width approx. 500 mm Chip depth as well as hollow and pointed joint indication Speed approx. 5,000 rpm Swivelling dressing stop Brake via foot pedal Weight approx. 950 kg  ... más información

Technical data (subject to change) Working width 510 mm Planing height max. 250 mm Electric table height adjustment with digital display (fine adjustment by handwheel) Table guided on 4 spindles, with 2 rollers Table length 1,040 mm 2 speeds (7 or 14 m/min) Motor power: 5.5 kW Speed 5,000 rpm Powers: 400 V, 50 Hz, 3~ Full load current 14.7 A Dimensions: 1,140 x 1,200 x 1,130 mm Weight approx. 650 kg

Four-sided planer Weinig Profimat 23E Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Operating speed 24m/min Pneumatic clamps for pulling rollers Electric pressure beam adjustment Worktop lubrication system Year of Build: 1998

SPECIFICATIONS: Total length : 2200 mm Width: max. 410 mm 4 planing knives Dressing height: max. 200 mm Installed power 3 KW  ... más información

SPECIFICATIONS: Planer: 2500 mm Machinable width: max. 210 mm Working height: max. 150 mm Cardan shaft drive Drive shaft power: 5.5 kW Spindle configuration: I. Spindle: Bottom (4 kW) II. Spindle: Right (4 kW) III. Spindle: Left (5.5 kW) IV. Spindle: Right (4 kW) V. Spindle: Top (4 kW) VI. Spindle: Bottom (4 kW) VII. Spindle: Universal spindle (5.5 kW) With tools.

High-speed planer and moulder Weinig H30 R for four-sided planing and profiling of wet wood (freshly sawn) The machine is in the queue and is being prepared for delivery after the order has been placed., working width: 250 mm, working height: 140 mm, spindles: 5, spindle 1: Bottom (7.5 kW) - counter bearing, spindle 2: Right (11kW), spindle 3: Left (11kW), spindle 4: Above (15 kW) – counter bearing, spindle 5: Below (30 kW) - toothed belt drive / counter bearing, feed: 15 kW, control: ATS system, Powered table rollers: Yes