cepilladoras usadas para la venta

Inv. Num. : 6696 Type: Profiset 60 Producer: SCM Created: 2018 Parameters: Number of spindles: 5 Vacuum belt width: 25-230 mm Working height: 6-120 mm Max. speed: 6000 1/min Equipment: Swivel head  ... más información

Technical details: - Max. planing width: 500 mm - Maximum chip depth: 5 mm - Length of feed table: 1,300 mm - Length of the take-off table: 1,500 mm - Total length of the table: 2,800 mm - Table height: 800 mm - Max. workpiece length without support: approx. 1.5 m - Length of the joining fence (Aigner joining fence with integrated auxiliary fence): 1,300 mm - Height of the joining stop: 150 mm - Joining stop adjustable up to 45° and extendable over the entire width of the table - Diameter of the TERSA knife shaft: 125 mm - Nominal speed of the TERSA knife shaft: 5,000 rpm - Number of planer blades: 4 pieces - Minimum width of planer blades: 17 mm - Diameter of suction nozzle: 160 mm - Required air velocity: min. 20m/s - Required air volume: 1500 m³/h - Vacuum at 20m/s air velocity: 705 Pa - 6 x machine shoes with adjustment screws - incl. EMERGENCY STOP switch En ...

Planing and molding machine Weinig Hydromat 30 N for four-sided planing and profiling of large (wet) wood and Beams with high feed and including planing heads for the horizontal spindles., spindles: 4, spindle 1: Bottom / 10 kW / counter bearing / jointer, spindle 2: Right / 10 kW, spindle 3: Left / 10 kW, spindle 4: Top / 10 kW / counter bearing / jointer, working width: 300 mm, working height: 200 mm, table: Solid chrome plated and air cushion, Control: ATS system

Four-sided planer, model P 22 N, 2 sets of planer heads, reversible knife – strip planer knife, sound protection hood built in 85, Weight approx. 1500 kg Spindles: 4 Working width: 220 mm Working height 120 mm  ... más información

SPECIFICATIONS: Work table size mm: 2600 x 400 Installed capacity: KW 5.0 Complete with hole punch, knives and regulator  ... más información

SECOND-HAND COMBINED THICKNESSER - SURFACE PLANER SCM L'INVINCIBILE 500 MM.  ... más información

Four-side planer KUPFERMUHLE 600x200mm - after technical review - German production - PLANING HEIGHT ON TWO AND FOUR-SIDES 200 mm - ideal for wet wood - electric height adjustment - electric adjustment of the left head - double feed chain planing width 600 mm planing height on two and four sides 200 mm power of vertical spindle motors 2 x 8.6 kW motor power of the lower shaft 5.5 kW upper shaft motor power 7.5 kW guiding ruler electric height adjustment adjustable vertical heads four upper pulling rollers four lower pulling rollers two take-up pull rollers 4 knives per shaft diameter of shafts 150 mm six types of feed speed 7 / 9 / 11.5 / 14 / 18 / 23 m/min row of anti-recoil pawls spindle diameter 30 mm / 100 mm material pressure at the left head dimensions (length/width/height) 260 x 190 x 205 cm weight 3500 kg

Four-sided planer Profimat 23 E – German production, WEINIG brand – for 6 heads – technical documentation – universal spindle – odometer reading 7662.7 mth TECHNICAL PARAMETERS: planing width 230 mm planing height 160 mm 1 lower spindle 5.5 kW 2 right spindle 3 left spindle 11 kW 4 top spindle 11 kW 5 lower spindle 7.5 kW 6 universal spindle 3600 7.5 kW adjustable spindles spindle diameter 40 mm feed continuously adjustable 5-24 m/min feed motor power 4 kW pneumatic clamp four steel upper pulling rollers three upper pulling rubber rollers rubber roller in the top to pull electric height adjustment tabletop length 2480 mm spigot diameter 140 mm pneumatic lock of the universal head Dimensions 470x190x200 cm weight 2800 kg

Four-side planer Weinig Powermat 500 - year of production 2008 - German production - PowerCom control - saving profiles with tools and positions - PowerLock tool holder - a set of heads included in the price planing width 300 mm planing height 200 mm PowerLock tool attachment PowerCom control with positioning of the upper and left spindles 1 spindle 11kW 2 spindle 11 kW 3 spindle 11 kW 4 spindle 15 kW 5 spindle 15 kW milling spindle 1.5 kW 12000 rpm spindle speed 8000 rpm feed continuously adjustable 6-36 m/min feed motor power 4kW four upper steel pulling rollers one rubber upper pulling roller one roller in the top pulling air cushion in the table automatic central table lubrication automatic lubrication of spindle guides length of the feeding table 1970 mm spigot diameter 2x140 mm 3x160 mm 1x80 mm total power 70 kW 140 A Machine dimensions 500x225x242  ...

Weinig Uniplan double-sided planer Planing width 220mm Planing height 15-120mm Horizontal spindle power 2x 5.5kw Spindle speed 6000r.p.m Spindle diameter 50mm Spindles supported on both sides Feed speed 6-32m/min 3kw feed motor  ... más información

4-sided planer Fabr. Vinous Type U 23 E blue class YOC 2001 with 6 spindle + horizontal sawing unit 1 Sp. U-5,5 Kw 2-3 Sp. R/L 7.5 Kw 4 Sp.R 5,5 kw 5 Sp. Ø 7,5 Kw 6 Sp. U 5,5 Kw 7 horizontal sawing unit 2.2 kw (glazing bead saw) with button pressure yes-no Working width 20-230 mm Working height 8-120 mm Spindle 40 mm Feed rate 5-24 m/min 4 Kw Dressing table 2.5 m manuele waxilite pump two driven rollers in machine table

- Exhibition machine - table opening to the rear, TERSA planer shaft, helical toothed feed roller---------- Technical Data ----------Planing width: 300 mm, Thickness table dimensions: 565 x 300 mm, Table length: 1,510 mm, max. chip removal: 4 mm, Planer shaft: 72 mm, Number of knives: 3 pieces, Clearance height: 230 mm, Min. workpiece thickness: 3 mm, Feed speed: 7 m/min., Speed: 5,200 rpm, Extraction nozzle: 2 x 120 mm, Motor power 400 V: 5.5 hp / 4 kW, weight: 270 kgnew exhibition machine

- Exhibition machine ----------- Technical Data ----------Planing width: 410 mm, thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planing shaft: 95 mm, number of knives: 4 pieces, clearance height: 240 mm, min. workpiece thickness: 3 mm, feed speed: 6 / 12 m/min., speed: 5,000 rpm, suction nozzle: 120 mm, motor power 400 V: 6.6 hp / 5.0 kW kW, weight: 450 kg- Special price -new exhibition machine

Weibert ADH 31C Dressing thickness planer Dressing table (LxW): 1295 x 325 mm Thickness table (LxW): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max. chip removal 3 mm Planer shaft diameter: 70 mm Max Planer Width 308mm Planer Knife 3 Speed 5200 1/min Feed rate 7 m/min Motor: 2.2 kW 230V Suction nozzle diameter: 100 mm Weight 210 kg G&STÜ-5904031 relkm Optionally with 400V G&STÜ-5904032

Weibert ADH 26C Dressing thickness planer Dressing table (LxW): 1120 x 275 mm Thickness table (LxW): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max. chip removal 3 mm Max. planing width 258mm Planer shaft diameter: 70 mm Planer Knife 3 Speed 5200 1/min Feed rate 5.5 m/min Motor: 1.7 kW 400 and in 230V Suction nozzle diameter: 100 mm Weight 170 kg G&STÜ-5904026 relkm23 Optional 400V G&STÜ-5904027

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

Weibert fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Four-sided planing and roll forming machine SCM COMPACT 23 max. working width ( finished dimension ) 230 mm max. working height ( finished size ) 120 mm Motor power dressing spindle approx. 4 kW Motor power vertical spindles approx. 5.5 kW Motor power upper horizontal spindle approx. 5.5 kW Infeed table length 2000 mm Motorized height adjustment of the feed system Positioning of the working units: The working units are adjusted at the front of the machine with a mechanical digital display of the position Manual pump for lubrication of the work table Machine is WORKSHOP OVERHAULED IN TOP CONDITION

heavy-duty thickness planer SCM S 520 Planing width 520 mm Planing height max. 250 mm Chip removal 3 - 8 mm Ribbed Steel Feed Roller Rubber pull-out roller 4-knife planer shaft, diameter 120 mm motorized height adjustment l mech. DIGITAL Feed rate 5 - 8 - 12 - 18 m/min. Machine is WORKSHOP OVERHAULED IN TOP CONDITION

- Exhibition machine - TERSA planing shaft, electric height adjustment, digital display for planing thickness---------- Technical data ----------planing width: 520 mm, thickness table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planing shaft: 120 mm, number of knives: 4 pieces, clearance height: 240 mm, min. workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min., speed: 5,000 rpm, suction nozzle: 120 mm, Motor power 400 V: 9.5 hp / 7.0 kW, weight: 695 kgnew exhibition machine