prensas usadas para la venta

Frame press pneumatic Pressing dimension L 3550 mm x H 1850 mm 3 pneumatic punches from the top 1 sliding press bar from the right with 2 pneumat. Cylinders Bearing surface on the press cylinder 100 x 80 mm Dimensions: Length 4500 mm Width 600 mm Height 2500 mm Weight approx. 500 kg  ... más información

The pellet mill has been refurbished by us and is in as new condition. Die, roll assembly and V-belt are new. Engine power 2 x 110Kw The diameter 650mm Press width 105mm  ... más información

Capacity 3 ton/hour Motor power 200Kw Die diameter 1000 mm Number of rollers 5  ... más información

Furniture Door Frame Press V. Grum-Schwensen Type MTP Specifications: • Assembly of frame parts: fully automatic • External frame dimensions min. (mm): 120 x 120 • External frame dimensions max. (mm): 700 x 2500 • Custom size  ... más información

Gebr. Frame press HESS Variant YOC 1983 pneumatic 0-15 bar Working area: approx. 2.40 m x 3.40 m 3 pressing units upright 2 pressing units on the side + 1 additional The machine is currently disassembled (see pictures 2 - 6). Picture 1 shows the machine before dismantling. Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

A frame press was made in 1992, we bought this equipment in second hand condition, but we havent used it ourselves. ... más información

SPECIFICATIONS: Electric hot operation Work table size mm: 2500 x 1300 with intermediate plate 4 pistons, diameter mm: 90 Vertical stroke mm: 450  ... más información

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg  ... más información

Veneer press Bürkle 310-1931 2500-1300 Plans and documents available The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

SPECIFICATIONS: Rotating frame press for glulam Max. working length mm: 3000 Max. working width mm: 1200 Thickness mm: min 25 - max 90 12 charging stations Complete with "Clam Carrier" pusher  ... más información

Frame press, gluing press -operated: hydraulic -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100 / H3700 mm -Transport dimensions: 4200/1200 / H2300 mm -Weight: approx. 3500 kg ... más información

Short cycle press, short cycle press system, panel press, gluing press, veneer press, adhesive press, heating press, molding press, -Pressing area: 3810 x 1600 mm -Manufacturer: Wemhöner, heatable veneer press type VOF2-295/2 -Control: Siemens S5 -Drive: hydraulic -Number of press cylinders: 8 pieces -Pressure pressure: 295 t -Pressure: max. 60 N/cm² -Plate heating: gas burner heat exchanger via thermal oil (max. 130° degrees) -Infeed conveyor belt: 1600 x 5000 mm -Outlet roller conveyor: 1600 x 5000 mm

Frame Press Hess 3000 - 1750 mm pneumatic The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Pressing area: 3300 mm x 2200 mm; Pressing elements vertical: 3; Horizontal pressing elements: 2; Pressure build-up: electro-hydraulic; Pressing pressure : per cylinder; Hold-down: no; Machine length: 4000 mm; Machine width: 1000 mm; Machine height : 2650 mm; Weight: approx. 900 kg; ... más información

We offer a Beck tower press for jointing, fully functional, year of manufacture 2004, imported from Germany after general overhaul of all chains, sensor tensioners, etc. Output approx. 27-36 plates / hour. ... más información

Maximum panel dimensions (for 3D wrapping) 1240x2740 mm Pressing cylinders 6 pcs Piston diameter 140 mm Piston stroke 190 mm Total maximum counter pressure 200 T Pneumatic pressure at work (max) 5 Kg/cm Room height 160 mm Upper and lower flange 40 + 20 mm Part size / manual pin placement area (maximum) 1250x2550 mm Minimum foil width 1400 mm Minimum plate thickness 15 mm Working height (distance from the floor to the level of the loading tray) 930 mm Maximum temperature of the heating liquid 130°C Air tank capacity 500 liters Total installed power 50 kW Dimensions (L x W x H) 11500x2950x2550 mm Weight 12800 kg In accordance with CE standards

Designed for cladding with PVC, ABC, PP films, natural veneer, foil, fabric, natural and artificial leather, etc. blanks from MDF, solid wood, aluminum, steel, plastics, etc. Working area size, mm 2980 x 1250 x 40 Number of work tables, pcs. 2 Press pressure, bar up to 5 Max. part height, mm 50 Vacuum pump capacity, m3/hour 100 Power of table movement drives, kW 0.55 x 2 Hydraulic power station power, kW 3.5 Heating power of the top plate, kW 25.2 Bottom plate heating power, kW 14.4 Total power, kW 46 Dimensions: Length, mm 10 270 Width, mm 2150 Height, mm 2100 Weight, kg 15,500

3 trays Table length: 3250 mm Machine is in excellent condition It has been used as spare machine in factory. ... más información

Umur 5 layers oil heated hot press Machine is in very good condition Automatic 1150 mm X 2250 mm ... más información