prensas usadas para la venta

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg  ... más información

SPECIFICATIONS: Rotating frame press for glulam Max. working length mm: 3000 Max. working width mm: 1200 Thickness mm: min 25 - max 90 12 charging stations Complete with "Clam Carrier" pusher  ... más información

For sale second hand briquett press mde from CF Nielsen, model BP 6500, cy 2008, well condition. Price: 95.000 EUR  ... más información

I sell a press for adhesive wood gluing LISY DVORAK TH6, built in 2008. Material size 2600 X 1050 x 50mm 6 work surfaces, manual rotazion. 6 pcs hydraulic top pressures per area / pump 1.1KW 6 pcs manual pressures per area Self-weight 1350kg. Very good condition. Available the same.  ... más información

Board repair line with double end profiling line in top condition Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg< Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: Feeding station with feeding rollers, Automatic vacuum lifting table for lengths up to 6 m Conveyor systems Repair line 1 Turning station Transfer service Repair line 2 automatic vacuum lifter for stacking (6m) Stacking roller conveyor Control cabinet with machine control Profilfraessanlage Stacking Tables; very well

Workpiece dimensions: 2.500 x 1.300 x 500 mmSpecific pressure: 0,9 kg/cm²total power requirement: 25 kwmax. temperature: 140 Grad: 100 m³/hWeight: 1.550 kgDimensions (L/W/H): 3.330 x 1.860 x 1.950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Bürkle Multifoiler BTF 1534 Model: 2009 - Made in Germany Full automatic pin system and rotation - 3 frames Frame sizes: 1330x3230 Maksimum working sizes: 1250x3150 Total Power: 53 kW Machine is in good condition and actively used in the production ... más información

Description: maximum panel length: 3000 mm working height : 1000 mm panel thickness 25 - 90 mm number of working units 6 pcs maximum weight allowed / work unit 150 kg number of clamps / working unit 8 pcs clamping mode of the clamps pneumatic number of pneumatic motors 1 pc (Ingersoll 3840 P) top panel pressing mode pneumatic number of vertical pressing pistons 1 piece compressed air pressure 1/2 - 6 bar electric motor 400V, 50 Hz, 1,5 kW rotating mode of working units: electric Approx. Onsite Dimension. (l x w x h): 4,000 x 3,400 x 3,000 mm, weight approx.: 1,500 kg

Used zinc rod making machine for sale. Model No.: FAH Year of construction: 2010 Price: 90,000.00  ... más información

Good Used Glulam Beams Press BUILD YEAR 2010 Hydraulic Preeslaenge 12 m Press height 1.3 m Machine like new  ... más información

Description: Joos electro-hydraulic veneer press with gold anodized plates Brand: Joos Type: EU80 Year of construction: 2010 M-No.: 1948289 Net working dimensions: 3,100 x 1,300 x 350 mm Press type: fine press - heated Adjustment: Electric-hydraulic, with incline press protection Control: Electric-relay controlled Automatic steering via proximity switches Electronic pressure monitoring Stepless pressure setting with constant pressure monitoring Timer: Automatic press opening end of press cycle Technical data: Cylinders: 6 cylinders of ø80 mm Pressure total: 70 tons/700 kN Pressure: Max.2.0 daN (kg)/cm2, distributed over 6 cylinders total 700 kN Weight: approx. 4,000 kg Control: manual , Pressure: analog Time: analog Indicator lights Emergency stop circuit: Safety cord over entire operator side Approx. Onsite Dimension. (l x w x h): 3,300 x 1,350 x 2,400 mm, weight approx.: 4,000 kg

Table size 2700x1600 mm Number of Table 2  ... más información

Multifoiler BTF 1528 -1400 Rotation Standard machine version: 1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm  ... más información

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

I sell a heavy briquetting press RUF RB400. Year of construction 11/2012 Engine power 22kW Productivity Number 400 pcs. Wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions: 3000 x 1800 x 2000 mm Combined weight 3000kg Equipment on the right - right entrance box. Condition after full remont/500Mtstd warranty as new. Available right away. With full documentation and CE.

The line consists of: briquetting press RUF 400 sawdust drum dryer auger belt conveyor - 2 pcs sorter with magazine screw conveyor - 6 pcs wet sawdust container fuel tank wood waste boiler wood waste crusher exhaust fan with cyclone packaging machine with compressor Year of last overhaul: 2023

Carousel press with hydraulics from the manufacturer LISY - DVOŘÁK Working length: 2200 mm Working width: 1200 mm Maximum wood thickness: 60 mm Max pressure: 100 bar ... más información

3 trays Table length: 3250 mm Machine is in excellent condition It has been used as spare machine in factory. ... más información

Wemhöner Wood Press Size : 250 cm x 120 cm Double table Machine is in a good working condition ... más información

pressure: 200 tpassage width: 2122 mmtable surface area: 2100 x 1400 mmtotal power requirement: 60 kWweight of the machine ca.: 35 tdimensions of the machine ca.: mPress/punch with injection molding unit200 ton punch upstroke press with injection molding machine (400to)Additional guard locking via 4 power strokesManufacturer: R+S TechnikYear of construction: 2013 / rebuild 2016Mains voltage/frequency: 400V/50Hz 3~(N/PEConnected load: 60KWWeight about 35000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.