subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 207)
Code: 0233 Brand: MCR - ITALY Model: EASY EDGE/5 - CE Standard Automatic edge bander for edging panels, veneer edges, PVC, solid wood, abs, etc. - CE Standard Technical data: Max edge thickness mm 5 Max panel height mm 80 Min panel height mm 10 Min panel width mm 80 Adjustable feed speed Composition: Gluing unit: Heat regulator glue tank - Heat regulator roller - Automatic strips loader End cutting unit consisting of 2 motors of 0, 37 kW - Blade diameter mm 125 - Blade inclination Fine trimming unit :allows the trimming of the top and the bottom of the applied edge - 2 motors Kw 0,37 - N° 2 combined Vidia cutters with inserts to 30° plus flat sharp Polishing unit - N° 2 motors - Brush diameter mm 160 Control panel Sound-proof cabin Total absorption A 10 Overall dimensions mm 3100 x 1000 x 1640 h Weight kg 950
Hebrock AKV3003DK-F edge banding machine with joints and two scraper blades. Edge thickness roll approx. 0.4 - 2mm Banding up to 8mm Workpiece height approx. 8 - 45mm Feed rate approx. 10m/min Noise protection hood Extendable workpiece support Suction connection 80 +140mm Aggregates: Manual overpressure adjustment with SIKO counter Infeed ruler manual adjustment with SIKO counter Edge thickness manual adjustment with SIKO counter Grooving mills with slide mills Gluing part with automatic edge retraction for rolls up to 3mm, switchable for synchronization and counter-rotation Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge pieces Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Radius scraper R2, pneumatically retractable Glue joint scraper blade can be pneumatically inserted ...
Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg ... más información
Sale of a gebr. edge banding from the manufacturer Hebrock. Specifications: Year of construction:1992 Edge thickness:0.4-8.0 mm Min. workpiece length:300 mm Min. workpiece width:70 mm Extraction connection Ø:140 mm Weight (kg):800 Dimensions (L x W x H mm):4100 x 1400 x 1300 mm Workpiece height:8-50 mm Chain feed:11 m/min Cross-cut saw unit:Yes Flush & Radius Milling Unit:Yes Hot melt glue container Support plates Roller capping pneumatically up to 3 mm edge thickness Flush milling unit
Edge banding Holz-Her Type: 1417 Sprint Year of construction: 1999 Banding thickness max. 8 mm Workpiece thickness = banding height 6 – 45 mm Workpiece width min. 60 mm Workpiece length min. 180 mm Workpiece protrusion via the transport chain on the assembly side 30 mm Feed speed 11 m/min. Feed motor 1.5 kW Swivel control panel Machinery: Pre-milling unit 1961 Edge feeding 1901 - fully automatic edge feeding of roll goods and stiff goods Glue application station 1906 or 1910 cartridge system Printed in 1913 Cross-cut unit 1918 – 2 cross-cut saw motors guided diagonally on round bars Milling unit 1942 – flush/radius/chamfering station Milling unit 1942 M – flush/radius/chamfering station Scraper unit 1929 - for radii up to 3 mm Form milling unit 1983 – 1 motor 0.6 kW 18000 rpm, copy corners up to 3 mm edge thickness Surface scraper unit 1964 – for ...
OTT Pacific V12-F PLUS PLC Comp. Control LCD display Pre-milling unit immersion-controlled Full car. Roller and edge magazine High-speed gluing station / overhead Double roller top pressure with electr. Positioning Auto. Inlet ruler Flush caps pneum. 0-3° Flush milling/bevel milling 15/30/45° - 12 mm Radius milling R-2, R-5 Corner rounds Radius Scraper Blade Surface scraper blade Soundproof booth with room extraction Machine from a small business with very few linear meters in TOP CONDITION
Equipment: - PLC control - Edge magazine - Glue application system "Cartridge" -Printed work - Cross-cutting unit - Milling unit, for flush/chamfer/radius - Shape milling unit - Radius scraper blade Specifications: - Length: 4,445 mm - Width: 1,500 mm Working Dimensions: - Workpiece thickness: 6-45 mm - Edge thickness: 0.4-8 mm - Workpiece width: min 60 mm - Workpiece length: min. 180 mm - Feed speed: 8/16 m/min without corner copying - Extraction connection: 2 x Ø 70 mm Static vacuum 1650 Pa Min. air velocity 20 m/sec - Compressed air connection 6 bar technical data subject to actual equipment!
CEHISA BRYKO EDGE BANDING MACHINE Glue tank Clipping the back of the front of the ball Milling up and down milling cutters Compact dimensions - length 1900mm ... más información
GLUE APPLICATOR Working width: 1400 mm 2 rollers, glue application on one side. Speed 0-50 m 2.2 m² Xsokevn Maximum adhesive thickness 65 mm Reel: Rubber: 200 mm Metal: 150 mm Cleaning program Dimensions: length 230 cm, width 140 cm, height 170 cm; weight approx. 800 kg ... más información
BIESSE AKRON 1440 NC Control Panel Numerical control with 10" monitor Plate height: 10 to 60 mm Roll edge thickness: 0.4 to 3 mm Strip edge thickness: 0.4 to 10 mm Minimum plate length: 140 mm Minimum plate width (at 140 mm length): 85 mm Minimum panel width (at 250 mm length): 50 mm Chain feed speed: 12 m/min Two additional glue trays
It works without any problems, although it requires service and adjustment. You need to program the inverter, set the aggregates to make corners and seal the glue tank, it sells as the price is negotiable, I will consider any proposal ... más información
Wood Her UNO 1304 FÜ + PU Edge thickness 0.4 - 6 mm Control panel with selector switches for adjusting the units Pre-milling unit for attachment in front of the gluing part Fully automatic edge magazine for rolls and strips Glue Application Station: Cartridges + PU Gluing Workpiece height 6-55 mm Printing unit pneumatic Cross-cut unit 1918 for rolls and strips up to 8 mm edge thickness with pneumatic changeover of 0-10° incline of the cross-cut saws Milling unit flush milling 6 mm, radius milling - bevel milling - 15° Scraper unit for chamfers and radii with 2 scraper blade carriers pneumatic indentation and disengagement Surface Scraper Unit - Finish Machine is WORKSHOP OVERHAULED in TOP CONDITION from a craftsman's workshop
Code: 0226 Brand: FELDER - FORMAT4 Model: PERFECT 710 E-MOTION - CE Standard Automatic edge bander with grinding unit for edgebanding solid wood, chipboard, veneer, PVC, Abs, and melamine panels - CE Standard - Year 2010 Technical data: Min edge thickness 0,4 mm Max edge thickness 10 mm Max panel height mm 60 Max feed speed 12,5 m/min Top pressure bar: workpiece thickness adjustment is carried out electronically from the control panel Operating unit: infeed guide adjustable from control panel Grinding unit: with 2 diamond cutters Gluing unit with glue pot with quick-change system for processing EVA and PUR glue Edge pressure roller unit with 3 rollers with positioning from control panel End cutting unit consisting of 2 independent blades with high-frequency motors 12000 rpm - Tilting from 0 to 15° Multi-function end trimming unit with 2 motors 12000 rpm Edge scra ...
SPECIFICATIONS: Max. machinable edge thickness mm: 1.5 - 10 Max. edge thickness mm: 55 Max. feed speed: 18 m/min CNC control Soundproof booth Chain feed drive Equipment: Sanding unit / Glue / Edge unit / Round unit / Edge scraper / Glue scraper / Brushes ... más información
SPECIFICATIONS: Execution: - Gluing machine - Cross-cut saw unit - Flush milling - Scraper unit - Brushing unit ... más información
ORMA disc gluing and screwing machine according to CE standards 4-roll gluing machine model I/413 with: - Working width 1300mm - Useful working height 100mm - double motorization, kw 0.75+0.75 - coating rollers D=250mm - dosing rollers D=180mm - with automatic brush washer Disc route with: - Useful working dimensions 3000x1300mm - Mechanical variable speed drive - with final photocells Year 2007, machines according to CE standards.
Code: 0631 Brand: CASADEI INDUSTRIA Model: V 20/10 - CE Standard Automatic edge bander for pre-glued edges on straight panels - CE Standard Technical data: Automatic feeder for panel advancement Automatic end trimmer for front and rear edge trimming Automatic trimmers - Speed rpm 9000 - cutters diameter mm 70 Z=4 Panel thickness min/max mm 10/50 Roll edge thickness mm 0,4-2,5 Edge height min/max mm 12/52 Feeding speed mt/min 5 Total power 4 Kw N° 2 suction inlets diameter 60 mm Overall dimensions: mm 2300 x 700 x 1250 h Weight kg 350
Edge banding machine Edge banding machine OTT Type: 20S Edge banding with hot melt glue glue basin Plastic edges up to 2 mm Solid wood edging up to 20 mm Flush milling units at the top and bottom Profile milling units at the top and bottom Edge grinding unit rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping c ...