- Aparatos de aspiración (9)
- Carros a control remoto (1)
- Carros de tensión rápida (1)
- Cercas (2)
- Cintas transportadoras (19)
- Descortezadora (6)
- Dispositivos elevador (14)
- Ejecutor de grúas (1)
- Eliminadores móviles de polvo (2)
- Equipos de extracción para un aire limpio (3)
- Instalaciones de calefacción (15)
- Instalaciones de succión (50)
- Líneas de paletas (8)
- Máquinas combinadas (41)
- Máquinas con torno (12)
- Máquinas de corte y empalme de punzones (2)
- Máquinas de recorte (2)
- Máquinas trituradoras de madera (28)
- Perfiles con dos extremos (8)
- Plantas de abastecimiento (20)
- Plantas de absorción de aserrin (2)
- Plantas de filtro / Instalaciones de filtración / Sistemas de filtrado (1)
- Plantas para filtros de aire (1)
- Punzones de fermentación (3)
- Recortadoras hidráulicas (2)
- Sistemas de puertas (4)
- Sistemas de trituración de madera (18)
- Tornos (20)
- Tornos de madera (8)
- Trituradoras (29)
- Trituradores (12)
- más
- A. COSTA (1)
- ABB (2)
- ACKERMANN (1)
- ADDA (1)
- ADOLF ALDINGER (1)
- AEG (1)
- Aircraft (3)
- AIRCRAFT AIRSTAR (1)
- AIRHEAT (1)
- AL-KO (1)
- ALBUS (1)
- Alko (5)
- ALLGAIER (1)
- ALMAB (1)
- Alu (3)
- AMANO (1)
- AMBOSS + LANGBEIN (1)
- ANGELO CREMONA (1)
- ARMINIUS (1)
- ASTRA ASPIRAZIONI DUE (1)
- ATLAS (1)
- Babcock (2)
- BACCI (2)
- Bajler Zembrod (2)
- BALDUF (2)
- BALESTRINI (1)
- BAR GAR (1)
- Barbaric (3)
- BARBERAN (1)
- BARTH (1)
- Bartling (5)
- BAUMANN (1)
- BöSCH (1)
- BECKER (2)
- BENTELE (1)
- BENZ (2)
- BERGES (4)
- BESCHLAGWAGEN KOMMISONIERUNG (1)
- BEZOMBES (1)
- Biesse (6)
- BISON (1)
- BLüMLINGER (1)
- Bohm und Kruse (2)
- BONFIGLIOLI (1)
- BOSITICH (1)
- BRANDT (25)
- BRAUN (1)
- BREVETTI (1)
- BRUECK (4)
- BRUKS (3)
- BRUKS-KLöCKNER (1)
- BUHLER (1)
- BUSELLATO (1)
- CABO (1)
- CALZONI / SPERRY VICKERS (1)
- CAMAM (4)
- Cambio (2)
- CASADEI (1)
- CASATI MACCHINE (1)
- CAT BLOWER (1)
- CATTINAIR (3)
- CEE ELECTRA (1)
- Cefla (2)
- Celaschi (2)
- CENTAURO (4)
- CFMG (1)
- CIT-MECCANICA (1)
- CKM (1)
- CLAAS (1)
- CNC-STEP (4)
- CO.MA.FER (1)
- CODIM (1)
- COLOMBO (1)
- COMAFER (1)
- COMEC (4)
- COMIL (1)
- COOK BOLINDER (1)
- COOK BOLINDERS (1)
- COOK BOLINDERS + MECOUTIL (1)
- COPCAL (1)
- CORAL (1)
- COROB (1)
- COSTA (1)
- COTINO (3)
- CPM (1)
- CRM (1)
- DEC (5)
- DHB (1)
- DIETZ VAKUUMTURBINE (1)
- DIETZ VAKUUMVENTILATOR (1)
- dimter (2)
- DIVERSE (1)
- DMC (1)
- DUSTCONTROL (1)
- EDELSTAHL (1)
- EFIBAT (1)
- ELCO (1)
- ELEKTRA BECKUM (1)
- ELEKTRA-BECKUM (1)
- Elektror Karl W. Müller (2)
- ... más
subcategorías
(el tercer nivel de categoría)
Fabricante:
(Categoría: 209)
Año de construcción: 1995
usado
Manufacturer: Rippert, Year: ca.1995, Diameter intake mm: 450, Engine power kW: 18,5, Flow rate approx. m3/h: 7500, rotations rpm: 1470, Year :ca.1995 ... más información
Año de construcción: 1995
usado
Manufacturer: Rippert, Type: Absaugventilator, Year: ca.1995, Diameter intake mm: 155 , Engine power kW: 1,3, Flow rate approx. m3/h: 1500, rotations rpm: 2860, Direkt drive: yes, Wight approx. kg: 60, Required space L x W x H mm: 800 x800 500, Vorführung möglich: yes, Year :ca.1995 ... más información
Año de construcción: 1995
usado
Manufacturer: Rippert, Type: N-355 B, Year: 1995, Diameter intake mm: 355, Engine power kW: 3, Flow rate approx. m3/h: 3000-6000, rotations rpm: 1415, Direkt drive: yes, Pressing: 1080, Wight approx. kg: 200, Required space L x W x H mm: 1000 x1000, Year :1995 ... más información
Año de construcción: 1995
usado
– after technical inspection – very good condition – year of production 1995 TECHNICAL PARAMETERS: turning length max. 1300 mm turning diameter 120 mm three bottom knives five top knives support hydraulic knife control automatic control magazine dimensions of the machine (L/W/H) 380 / 210 / 215 cm weight ~ 3490 kg
Año de construcción: 1995
usado
1.000 € Description: passage width: approx. 1300 mm please also have a look at the PDF file of this machineApprox. Onsite Dimension. (l x w x h): 2,200 x 1,200 x 2,000 mm, weight approx.: 200 kg ... más información
Año de construcción: 1995
usado
Remote-controlled gate loading system H38 For the block-initiating gate incision at high feeds. The gate guide sits in a stationary operating stand with a good overview of the entire cutting system. The machine is in very good condition and can be delivered with new control on request! ... más información
Año de construcción: 1995
usado
Technical data: Roll width: 800mm Roll diameter: 152mm Length: 9700mm Roll spacing: 800mm Power: 2.2 KW Accessories: Abort ingenurole (right) Lifting and sinks counter-rotating thread roller for max. wood length 7.0m, threaded roller is located 2.5 m before the roller aisle end
Año de construcción: 1995
usado
achkettenquerförderer or Auschutisch with pull-off cross conveyor. Chains with roof chain takers. 5 chain strands. Length 5,900 mm. Spread width 2,000 mm. Total width 2,400 mm. Chain spacing: 750 - 750 - 1250 - 2000 mm. Fully plated. Drive via gear motor with 3 KW and adjustable slip clutch. Sprockets with clamping elements. Chain 80 x 40 x 6 mm. Technically reviewed and tested. Trial run possible.
Año de construcción: 1995
usado
Hot air Shrink tunnel for packaging e.g. briquettes or long products hot air shrink tunnel for packing of fire briquette or long woolden products ... más información
Año de construcción: 1995
usado
Manufacturer: IMA, Type: Quadromat 4012 F, Year: 1995, Program: yes, Min-max edge material mm: 0,5 - 8,0, Min.-max. workpiece length in mm: 250, Min-max feed m/min: 10, Premilling: yes, Min.-max. batten magazine mm: 0,5 - 8,0, Mitre stations: yes, radius milling: yes, Corner tracing type: yes, 2 Motoren: yes, Year :1995
Año de construcción: 1995
usado
Manufacturer: IMA Kantenbearbeitung , Type: U/F 720, Year: 1995, Programm: yes, Achsteuerung: no, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Work piece thickness min mm: 70, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: 12, Strip magazin: no, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Soft edge single side: no, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Feeding speed max m/min: 10-25, Compressed air bar: 6, Year :1995
Año de construcción: 1995
usado
Manufacturer: KDP Kantenanleimmaschine, Type: KDP 111 SL, Year: 1995, Min-max edge material mm: 0,5-2,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Lasertechnik: yes, Mitre stations: yes, Radius milling axis adjustment: no, Year :1995
Año de construcción: 1995
usado
SECOND-HAND 5+1 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23E - working width mm.230 - infeed working table 2000 mm. - 1st spindle horizontal bottom 4kw - 2nd spindle vertical right 7,5kw - 3rd spindle vertical left - 4th spindle horizontal top 7,5kw - 5th spindle horizontal bottom 4kw - 6th spindle universal 4kw - volt 380/50 - s/n 228-80241 - year 1995 (CE)
Año de construcción: 1995
usado
Gebr. Tenon cutter Carpentry Abundmaschine KRÜSI ZA-66/95 YOC 1995 CE version with protective cabin Crosscut saws: Motor power: 4.0 kW 65° swivel Lateral adjustment by handwheel travel: 250 mm max. saw blade diameter: 750 mm max. cutting height: 290 mm Cutting saw – slitting unit: Motor power: 7.5 kW 45° swivel Saw blade diameter: 2 x 450 mm max. cutting depth: 175 mm Settling saws: Motor power: top 2.2 kW / bottom 2.2 kW Complete sawing unit can be swivelled forward up to 45° Additional swivel heads: swivel by +/- 45° possible max. saw blade diameter: 350 mm max. cutting depth: 125 mm Sliding table: swivel +/- 60° on both sides Laser for cutting position indication for the swivel cross-cut saws Chassis Moving trestle Extraction connection: 2 x 120 mm and 2 x 80 mm Machine dimensions measured without sliding carriage: L: 470 cm W: 135 ...
Año de construcción: 1995
usado
Made in 1995 in Denmark. Machine No. 9585037. Made in 1995 Transport dimensions: 1800x620x2000 mm. Weight: 400 kg ... más información
Año de construcción: 1995
usado
This Biesse Rover 321R Machining Wood Working machine was manufactured in the year 1995 in Italy. It is equipped with a CNI NC 481 control unit. The machine has a spindle speed of 15000 rpm. ... más información
Año de construcción: 1995
usado
Slow runner with sliding floor Rotor width 800 mm 18.5 kw motor ... más información
Año de construcción: 1995
usado
Slow runner with sliding floor 800 mm rotor width 11 kw motor good condition ... más información
Año de construcción: 1996
usado
Manufacturer: Soenen, Type: SHCR, Year: 1996, Winkelschweissungen im Bereich von min-max Grad: verstellbar, Mit Schweissraupenbegrenzung an Tisch- und Spannplatten: yes, Spannhöhe min-max mm: 30-90, Kämpfer schweissen im Stumpfschweissverfahren: yes, Spannhöhe min-max mm: 30-90, Spannzylinder pneumatisch: yes, Schweissspiegel und Profilanschlag kommen von unten: yes, Einstellbare Schweissraupenbegrenzung: yes, Ausricht-, Abschmelz- und Stauchanschläge: yes, Digitale Anzeige der Schweisstemperatur: yes, Wight approx. kg: 500, Year :1996
Año de construcción: 1996
usado
KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization) ...