máquinas de goma usadas para la venta

Sample marker S1  ... más información

DESMA 400 ton rubber injection molding machine -Model : SIGMA 4000  ... más información

with 15 cards + Rack S5 187U with 10 extension cards. Scope of supply shown on the picture.  ... más información

Press 400x400 make ZDA, typ 10158 manualy operated electrical heated plates Clamping force 785 kN ... más información

Press 400x500 make ZDA Type 100660 manualy operated electrical heated plates Clamping force 1540 kN ... más información

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF THE MIXING CHAMBER: approx. 250 ltr. USABLE VOLUME: approx. 190 ltr. BATCH WEIGHT: approx. 230 kg ROTOR speeds (standard): 0-60 rpm DRIVE POWER: 1500 kW Hydraulic feeding with 2 hydr. Cylinders The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and FU can be offered). ______________________________________________________________________ _____________ TECHNICAL DATA INTERNAL MIXER: MODEL: GK 255 N - with tangential geometry ZZ2 VOLUME OF MIXING CHAMBER: approx. 250 ltrs. USEFUL VOLUME: approx. 190 ltrs. BATCH WEIGHT: approx. 230 kgs ROTOR SPEEDS (standard): 0-60 rpm DRIVE POWER: 1500 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body  ...

TECHNICAL DATA INTERNAL MIXER: MODEL: GK 135 E - with interlocking rotor geometry VOLUME OF THE MIXING CHAMBER: 140 ltr. USABLE VOLUME: approx. 100 ltr. BATCH WEIGHT: approx. 120 kg SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine consists of 3 parts: substructure, housing and hydraulic funnel. The transmission is also part of the offer (engine and VFC can be offered). ______________________________________________________________________ _____ TECHNICAL DATA HEAVY DUTY INTERNAL MIXER: MODEL: GK 135 E - with intermeshing rotor geometry VOLUME OF MIXING CHAMBER: 140 ltrs. USEFUL VOLUME: approx. 100 ltrs. BATCH WEIGHT: approx. 120 kgs ROTOR SPEEDS: 10/10-50/50 rpm DRIVE POWER: 600 kW RAM ACTUATION: hydraulic The machine is in 3 piece design including basement, body and hydraulic hopper. The gearbox  ...

For deutsch description pls. look dwon below Internal mixer of the type GK 190-E from Werner & Pfleiderer (today HF Mixing Group), with interlocking rotors, hydraulic feeding The machine is currently disassembled and can be visited. All parts have been technically tested (tightness, wear, other damage). A complete refurbishment is recommended and can be carried out by us. In the case of refurbishment, we give you a 12-month warranty from delivery. Internal mixer type GK 190-E from Werner & Pfleiderer (today HF Mixing Group), with intermeshing rotors, hydraulic feeding. The machine is currently disassembled and can be inspected. All parts have been technically checked (tightness, wear, other damages). A complete reconditioning is recommended and can be done by us. In case of reconditioning we give you 12 months warranty from delivery.

QTY 1 x TMP (Division of French Oil, USA) Techni-Mix Lab Mixer, Model HD-5,  Year of manufacture: 2014 (New),  CE Marked, Mixing capacity: 5 Litre, 2 wing tangential rotors, Pneumatic hopper, Tilting body discharge (easy for cleaning), 20HP AC variable speed motor, Rotor rpm - Front 47.55rpm, Rear 39.28rpm. Complete with Electrical controls and in excellent condition.

1 x Francis Shaw model K4 intermix, Machine number: 4549, Original Year of manufacture:1992, Chamber volume: 91 litres, Batch weight: approx 76kg (at 70% F.F. and 1.2 S.G), Hydraulic hopper, Hydraulic drop door with linear actuator, Full unidrive David Brown gearbox - power rating 450kW, ratio 29.065:1 (input speed 1500rpm, output 51rpm), In good condition, but currently without motor or controls. Manuals/drawings available.

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.  ... más información

Qty 1 x Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears (1:1), cored rolls with rotary joints fitted, auto lubrication system with 45kW AC right angle drive variable speed motor and gearbox, fabricated bedplate. Complete with controls. Also available (if required): Sheet material unwind station (let off stand) Simple Cooling unit In-line cutter Accumulator rolls (wind up)

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

Bartell FSW-409 7/8in bead winding machine suitable for PCR tyres 12in to 20in consisting of: - 12 station bead wire let of unit. - Prodicon zig zag cutter Type Z/Z year 1988 (takes sheet compound max 750mm wide and cuts to suitable size for feeding extruder. - 60mm dia coldfeed extruder, L/D ratio 13:1, with 18.4kw DC variable speed motor and 3 x TCU's - Festoon section - Former unit with various Bartell formers available/included. - Siemens S5 plc controls.

Qty 1 x HF/Pomini VIC95X (IM110VIC), Hydraulic hopper (IM90-E type), Refurbished complete chamber and hopper installed new in August 2016, Machine number: 487, year of rebuilding 2014, CE marked, Chamber volume approx: 104Litre, Useful volume at 0.75FF: 78Litre, Batch weight at SG 1.15: 90kg, Hydraulic dust seals (PYH Type), Hydraulic drop door with linear actuator and toggle latch, Rotor geometry adjusted by 2 x 2.2kw, 1420rpm motors, Unidrive gearbox, Ratio 20.6:1, With Ansaldo 352KW, 1030/1230rpm, 875Amp, 440V water cooled DC variable speed motor. Siemens S7 PLC control system (cpu 315-2DP, step 7). Complete and in very good working condition. All manuals and documentation available. Used spare chamber parts available/included:- Qty 1 set (2pc) used rotors Qty 2 sets (4pc) used drilled sides Qty 2pc used door tops Qty 1pc used weight The mixer has now been r ...

QTY 1 x Pomini VIC1.8-PX1.6 Tandem Lab mixer, Machine number 9912, date 1990, Modern frame design with unitized fabricated steel base, Anti friction roller bearings with floor lubrication, 22kW DC variable speed motor. Rotor speeds 0-230rpm Torque montioring sensors. Siemens PLC control system with S7-300 CPU (combined with original S5). Desktop computer interface. Left hand mixer: Pomini PX1.6 tangential rotor type, Volume 1.6Litre, 2 wing rotors, FY type bronze dust seals, Jacketed chamber for heating or cooling, Hard Chrome plated chamber and rotors, Chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side), Pneumatic oil injector, Pneumatically operated discharge drop door with linear actuator, Pneumatically operated hopper load door, Pneumatic ram with transducers fitted to monitor floating weight position. Proporti ...

Qty 1 x Carter MK6 direct drive Banbury internal mixer, Serial no. 237/11 (New chamber/hydraulic hopper in 2011/12), Hydraulic hopper, Chamber volume: 160L, 2 wing rotors, SSA type dust stops, hydraulic drop door with linear actuator, pneumatic oil injector fitted to end frame, hydraulic hopper, PIV semi unidrive gearbox (28:1 ratio), 310/620kW power rating, 728/1484rpm input speed, 26/53rpm output speed. Currently fitted with fixed speed motor fitted - 355kW, 744rpm to give rotor speed 26.5rpm. Complete with lubrication unit, hydraulic unit, electrical controls etc and in very good condition (inspection report carried out by Farrel available on request).

1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.

1 x Refurbished Pomini Farrel model P160 Banbury internal mixer, Original year of manufacture 1984, Rebuilt in 2017 (not used since), Mixing chamber volume 160L Net, Batch size at 75%FF and SG 1.0 - 120kg, 2 wing rotors, PYH hydraulic dust stops (new), hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, Unidrive gearbox type NF160, rating 640HP, Input speed 1500 rpm, output 39.6rpm. with 470kW, 500V DC variable speed motor. Mechanically complete but currently without electrical controls.