máquinas de goma usadas para la venta

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs  ... más información

machine measurements: 3.000 mmmachine weight: -- kgpower capacity: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

cross-section width:: 100 mmcross-section heigth:: 50 mmfeed:: 10 - 999.999,9 mmspeed of feed:: 1 - 50 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Tung-Yu Cold Forming Press 22” x 24” deep platens 12” daylight Pressure up to 35/40ton Year 2015 Overall dims: 1.2m deep x 1.8m x 2m high Weight: 2000kgs +/-  ... más información

chamber volume: 170 literuseable volume: -- literfriction: -- motor drive power: 800 kWCondition: used -Specification: internal mixer used as additional option: Rubicon batch-off plant- capacity approx.: 170 litres- rotor model: tangential design- drive controller: Allen Breadley- Control: Mitsubishi- Motor speed: 1,000 rpm- Gearbox: Panamax 9000 make Sumitomo- Rotor speed: 5.6 - 55.6 rpm- Chamber hardness: 45 -50 HRC- Motor: 800 kW - 1000 rpm - 380 V, 50 Hz- Moror make: Teco- Output: 27 tons/day- Cycle time approx.: 4 - 8 min- Height approx.: 7,500 mm- Weight approx.: 35,000 kg, incl. gearbox and motorAvailable as an option:- Batch-off system Make: Rubikon / Mattech- Cooling bars max.: 300 mm / 2x 80 ...

Carbon black weighing scale 400l Description attached!  ... más información

Mesh belt for AUMA / Rotocure new and unused Length: 14100mm Width: 2250mm  ... más información

QTY 1: New Bainite make 95 litre intermeshing type mixer Model: BMIM95 Intermeshing mixer with hydraulic hopper Net chamber volume: 95 litre Rotor speed: 6 – 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement), Motor power: Siemens 420kW, 1000rpm AC squirrel cage motor with Siemens G150 VFD, Discharge door: Hydraulic drop door type with linear actuator and toggle latch mechanism, Feed Hopper Assembly: Hydraulically operated, Floating weight: single ‘V’ bottom type, Gearbox: Elecon Full unidrive type with S.F. 2.25. Bedplate: Fabricated steel, Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Electrical Controls:  Siemens G150 variable frequency drive controls. Operator control panel with Siemens PLC and HMI.

DESMA 400 ton rubber injection molding machine -Model : SIGMA 4000  ... más información

Italmatic Truck Buffer Model MATIC TOP Year 2018 Volts 400 3F/AC - Amp 90 50Hz 54kW 8 ba  ... más información

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

Cambridge Dynamics Press 60ton Platen 1m x 1m Platen max. speed 20mm/s Year 2020 For composite, prepreg, SMC Sheet moulding Compound  ... más información

Yizumi Injection Press Model: YL2-V280L Clamping force 2800 kN Volume: 2000cc Mold open stroke 500mm Min. mold height 100mm Heated platen size 670mm x 780mm Heating plate daylight 600mm Injection pressure 1970 bar Theoretical Injection volume 2000cm3 Oil pump power 11kW System pressure 230 bar Total power 37kW Power supply: 415V, 50Hz, 3P+N+PE Rexroth variable pump + Inovance servo motor: Year 2021 CE marked

Akar Makina Truck Builder Machine Model AKR172 Year 2021 Total power: 4.5 Kw Working pressure: 8 bar (120psi) Manual and automatic use TECHNICAL FEATURES PLC controlled precured tread builder for tyres 700 mm (27.5") -1450mm (57") with expandable hub and rim system User friendly easy operation Tyre range: 7.50 R 15 - 12.00 R 24 Expandable rim: 20-22.5x9" included (Other sizes are optional) Three-zone pneumatic pressure application feature Two-mode tire rotation with pedal control Adjustable speed control tread application on tires Controllable stitching and building operation with tread stretching Three-line optical laser centering system CE Certified

clamping force: 2700 kNinjection volume: 3300 cm³screw diameter: -- mmplaten size: 780 x 670 mmCondition: used,Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition almost unused!clamping unit:- Euromap (size): 2700-7200- Clamping force: 2,700 kN- Heating platen size L/W/H: 780 x 670 mm- Distance between upper and lower platen: 970 mm- Stroke min.: 420 mm- Stroke: 550 mmInjection unit:- Injection volume max.: 3,300 cm³- Injection pressure: 2,180 bar- Nozzle contact force: 80 kN- Connected load: 3x 400 V, 50 Hz, N- Back-up fuse: 125 A- Pump drive: 265 bar- Drive power: 22 kW- Pump speed: 66 rpm- C ...

Continuous Mixer (UP1) Manuf.: Pomini Farrel Year 1982 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW Continuous Mixer (UP2) Manuf.: Pomini Farrel Year 1986 Model: 9LCM 230 + Extruder 12” Diam. 230/304mm L/D ratio: 14:1 Speed (rpm) 80 / 447 (LCM) Power (kW): Extruder: 300kW LCM: 900kW

NEW Labratory Mill Rolls 170 x 465mm Description attached! Next to this we are able to offer all sizes of Mills from Labratory up to 100" (2500mm) for attractive price! Please ask us!  ... más información

screw ø:: 60 mmscrew length:: 11D screw speedl:: -- U/mindrive power:: 18,5 kWCondition: used, overhauledSpecification: rubber extruder - used- screw diameter: 60 mm- screw length: 11D- screw length: approx. 660 mm- overhaul of screw and barrel- Overhaul of feed roller and safety cage- New rotary union for water- AC motor: 18.5 kW- New control cabinet with frequency converter for variable speed- New cabling- Pressure and temperature sensors on the extruder head- Safety device- CE marking and an operating and maintenance manual in EnglishOverhauled according to CE-Standard safety regulationsWarranty: 1 yearOption:3x temperature control units up to 95°C water temperature Power: 6 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Barwell Midi Preformer Extruder 25 litre Complete with rotary cutter  ... más información

roll diameter: 250 mmroll length: 500 mmrolls drilled: Kernbohrung nip adjustment: mechanisch drive power:: kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información