otras máquinas para el plástico usadas para la venta

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

BIZETA BZ3T4P/8 welding machine was built in Italy in 1989. The machine is designed to perform a very precise and accurate welding of materials such as PVC and polyester by subjecting the surface of the material to high-frequency energy. Electricity in the form of an electromagnetic field generates heat, which softens the material and fuses its layers together. At the end of the process, the BZ3T4P/8 welding machine with rotary table cools the material surface while holding it under a high pressure of 22 tonnes, resulting in the formation of a very strong weld. The total weight of the machine is 3400 kg. Technical parameters of the high frequency welding machine BIZETA BZ3T4P/8 - welding force: 22000 kg - power: 22 kW - maximum working pressure: 160 bar - superposed circuits voltage: 110 V - power supply: 3x 380 V; 50 Hz - weight of machine BZ3T4P/8: 3400 kg

This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Make: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm

Sofema press for foam cutting Year 1990 The use of the presses is intended for foam cutting. (cushioning foam, soundproofing or other for automotive, aeronautics, etc.) The last pieces cut are the one in pj. At the documentation level, we have electrical diagrams and a few mechanical plans.

Pressing force: 180kN, total stroke: 250mm, power stroke: 12mm, max. compressed air supply: 6bar. ... más información

Clamping plates: 850 x 1250 mm - Fastening of the tools via T-slots Stroke of the upper Clamping plate: 400 mm max. Opening width: 800 mm max. Tool installation height: 400 mm min. Table height: 1080 mm Clamping force: 400 kN Opening force: 480 kN Beam angle: 85° top plate Tilt range Frame: From 0° to 90°, hydraulic Plate rotation range: From -90° to +90°, manual Travel cylinder: 1 PARKER travel cylinder Force elements: 2 power elements with clamping jaws, mounted at the front Mould weight above: approx. 400 kg max. Total mould weight: approx. 1000 kg max. Valve Control: Black/White Valves for Travel Cylinders and Power Elements Core Pull Control: Without Core Pulls Hydraulic power unit: H-L 55/22 - Operating pressure max. 250 bar Control: Without control Dimensions: Mould carrier: approx. 1,600 x 1,400 x 2,000 mm (width x depth x height) Weight: appr ...

Bag making machine Garbage bag roller with tape on roll Coemter (Spain) Bag width 400-650mm. Up to 8 rolls/min. Speed ​​up to 60m/min or up to 60m/min. Weld width 1000mm ... más información

Slitter rewinder for foil, paper, foiling and laminates. 7 my -200 my Max. material width = 1250 mm Speed max. mech = 350 m/min, Rewinder max. = 600 mm Min. working width = 25 mm, sleeve 76 mm, Max. working width = 1250 mm, sleeve 76 mm,, Unwinder (shaftless) diameter max. = 1000 mm Sleeve = 70-76/ 150 -152 mm, Cutting system = paper cutting, Side edge control , 16 knives included,

Without documentation. ... más información

Rotational speed: 15,000/min, max. compressed air supply: 5-8bar. ... más información

M. No.: 24 Colours: 6 Equipment / Additional information: Consists: • stacker • printing machine • Cup feeding • stapler Max. cup rim diameter 130 mm Min. cup rim diameter 55 mm production speed each according to cup size, quality and Raw materials with UV drying up to 24,000 cph

Description: Machine number: 802 411 Connected load: 7.5 KW Supply voltage: 380 V Amperage: 16 AApprox. Onsite Dimension. (l x w x h): 1,700 x 1,500 x 500 mm, weight approx.: 280 kg ... más información

Drosbach 165/58 corrugator cutter manson mold and 2 pcs head Max diameter: 165mm ... más información

Machines for the production of wicketer bags. (e.g. bread bags) Material = Ldpe; HDPE, PP Power max. 120 bag / minute. Rapport 250 -500 mm, Unwinder width = 1400 mm ( With brake ) Side edge control . Folding unit Punch for holes Wicket transport unit  ... más información

Calender with stretching line Roll width: 450 mm Diameter of roller: 252 mm Stretching line length: 2500 mm incl. 4 GWK temperature control units, 12 kW heating capacity  ... más información

This cooling tank from Primac is in machine storage at Plastima Used Machinery. The Cooling Tank is from 1994 and is in great condition. - Brand: Primac - Model: CV.2C. 125/6 - Pipe diameter max: 125 mm - Cooling length: 6000 mm - Year of construction: 1994  ... más información

Description: Machine number: 803082 Connected load: 7.5 KW Supply voltage: 380 V Current: 16 A Attention: Main switch defective! Machine runs when new main switch is installed.Approx. Onsite Dimension. (l x w x h): 1,450 x 1,000 x 650 mm, weight approx.: 330 kg ... más información

Ermafa Type: RA 1200-350 , Agglomerator Control: Siemens S6 Built: 1995 Dimensions and weights Dimensions LxWxH m: 1.5 x 1.5 x 3.36 Machine Weight Kg: 4250 Other Motor-Three-phase cage rotor motor Performance-355 KW Speed-1488 rpm Voltage-380/660 V;50 Hz Degree of protection-IP 55 Type-IM V3 Mode-S 6 Mixed fraction from shredding 700-1100 kg

Bottom weldig machine with slit selimg up to 4 webs, unwinding, side gusseting, hole punching, collecting belt, max. welding width 1300 mm, draw length: 220 - 1300 mm, cycles (mech.) max. 220/min, very good condition, video availabale  ... más información

Description ... más información