molinos usadas para la venta

Material: steel Engine: 37 kW Weight: 900 kg Length x Width x Height: 1300 mm x 1000 mm x 900 mm Applicable for production of finest plastic-powder: - finest powder without use of nitrogen - best powder characteristic: best flow behaviour, high apparent density and narrow particle distribution - low grinding temperature, in terms of optimal ducting of the air - fully automatic continous operation - simple regluation of particle size. Throughput rate : 50 - 200 kg / h. Very good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

Strand granulator type: ASG-4-63 without feed The GRANULATOR ASG 4-63 is only suitable for the cutting/granulating of semi-hard thermoplastics and is used in the regranulation /recycling of plastics on/on an extrusion line Up to 4 pieces of individual plastic strands with the Ø of 4 mm can be fed to the cutting rotor via a separate feeding unit, usually strip or roller puller. The part/granulate length is proportional to the feeding speed and can be adjusted by changing the rotor speed. Speed rotor max. 380 min-1 Ø Feed strands max. 4mm Cutting force : ~410 N EL connector: 400VDC 16A

New machine GSL 300/600 Rotor diameter 300mm Rotor width 600mm Drehzal 150 min. Drive 11 kW Rotor blade 48 pieces Strator knife 2 Screen perforation 6mm Weight approx. 950 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common v ...

New machine GSL 300/400 Rotor diameter 300mm Rotor width 400mm Drehzal 150 min. Drive 7.5 kW Rotor blade 33 pieces Strator knife 2 Screen perforation 6mm Weight approx. 550 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common  ...

New machine GSL 180/430 Rotor diameter 180mm Rotor width 430mm Drehzal 150 min. Drive 4 kW Rotor blade 45 pieces Strator knife 2 Screen perforation 5mm Weight approx. 250 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common va ...

New machine GSL 180/300 Rotor diameter 180mm Rotor width 300mm Drehzal 150 min. Drive 4 kW Rotor blade 30 pieces Strator knife 2 Screen perforation 5mm Weight approx. 180 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common va ...

New machine GSL 180/180 Rotor diameter 180mm Rotor width 180mm Drive 3 KW Rotor blade 18 Weight approx. 140 KG The low-speed auxiliary mills of the GSL series operate at a low rotor speed and thus ensure low-noise operation. The high-quality regrind produced is largely free of dust content. The special rotor blades can be regrinded several times and no longer have to be adjusted in the auxiliary mill. The material to be shredded is fed via an inlet funnel manufactured in sandwich construction. An exchangeable sieve, which determines the final size of the ground material, closes the grinding chamber downwards. The material is discharged via a material collection container, which is manufactured in stainless steel as standard. In general, the material collection container is equipped with a connection for common vacuum systems. Advantages: Special rotor knives make adjust ...

Bellaform Shear Roll Mixer BSW `2022 Almose new machine  ... más información

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible  ... más información

we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.

1 new funnel hacker DH 800 - 30 KW Rotor width 800 mm Rotor diameter 400 mm Number of knives 46 / concave sanded / quadruple rotatable Engine power 30 kW Electrics 400 V , 50 Hz Control control cabinet, blower cooled, with SIEMENS PLC Funnel opening 800 x 1300 mm (option: 1300 x 1750 mm) Funnel volume approx. 1.16 m3 (with hopper extension approx. 1.7 m3) Sieve as desired, 10 - 50mm Hydraulic 60 litre tank, external gear pump, oil cooler optional Dimensions ( LxWxH ) 2620 x 1738 x 1830 mm Weight approx. 3400 Kg (with hopper extension approx. 3550 Kg) Throughput capacity approx. 3 - 5 m3 per hour, depending on material and sieve Suction nozzle 200 mm, can be used on both sides Suction capacity at least 28m/sec. on suction nozzles

For sale is the following article: Cutting mill Profile mill Möser 30 KW, Throughput: up to 250kg/h (depending on plastic and parts) Manufacturer: Möser Accessories: silo/cyclone, 1 suction blower, 3-4 perforated screens (8-10mm grain size), 2 sets of knives, control cabinet for switching on and off. Complete pipe system More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional Mill is still built and connected to electricity. You are welcome to look at them and try them out. Pick-up by arrangement and dismantling possible promptly.

Various models Shredder, Crusher, Shredder. More information on request.  ... más información

Single shaft shredder WT3080 A(mm)2466 B(mm) 1677 C(mm) 1280 D(mm) 880 E(mm) 500 H(mm) 1700 Clamping cylinder stroke (mm) 900 Rotor diameter(mm) 380 Rotary speed(r/min) 83,7 Sieve mesh(mm) 25 Knives on rotor: 42+4 Fixed knives: 4 Engine power (Kw.) 30 Hydraulic station with motor(KW) 1.5 Weight (KG) 1950

Single shaft shredder Type WT 2260 Clamping Cylinder Stroke(mm) 500 Shaft Diameter (mm) 224.7 Shaft Width(mm): 600 Shaft rotational speed(r/min) 83 Sieve Diameter(mm) 25 Number of knives per shaft(pcs) 28 +4 Number of fixed knives(pcs) 2 +2 Motor Power(Kw) 18.5 Hydraulic station power (KW) 2.2 Weight(KG) 1400

A(mm)1486 B(mm) 1368 C(mm) 634 D(mm) 360 E(mm) 1269 H(mm) 1711 Rotor diameter(mm) 320 Rotation speed(r/min)438 Sieve mesh(mm) 8 Number of rotor knives (pcs) 3x2 Fixed knives (pcs) 2x2 Motor Power(Kw) 15 Weight(KG) 1485 Extended Backfill + PVC Double Curtain  ... más información

Dimensions A/B/H(mm) 282525641875 Filling Part C/D(mm) 14101200 Rotor diameter (mm) Φ400 Rotation speed (r/min) 74 Sieve Diameter (mm) 50 Knives on rotor (PCS) 66+4 Fixed knives (PCS) 2 Motor Power(KW) 55 Hydraulic motor power (KW) 5.5 Weight(KG) 5000  ... más información

Dimensions A/B/H(mm) 282520041875 Filling Part C/D(mm) 14101000 Height of discharge port E(mm) 500 Cylinder Stroke(mm) 850 Shaft Diameter (mm) Φ400 Rotation speed (r/min) 74 Sieve Diameter (mm) Φ40 Knives on shaft (pcs) 54+4 Fixed knives (pcs) 2 Power Moor (KW) 45 Related to Hydraulic Power (KW) 1.5: Weight(KG) 4000

Plastic mill 3280 A(mm)1720 B(mm) 1630 C(mm) 800 D(mm) 410 E(mm) 1465 H(mm) 1910 Cylinder stroke(mm) 320 Rotor diameter (mm)580 Eye sieve(mm) 12 Number of rotor knives (pcs) 3x2 Fixed knives (pcs) 2x2 Engine power (kW) 22 Weight(KG) 1730  ... más información

Motor power 11kw Rotor speed 415 rpm/min SKD 11 steel knives Knife type ; Stepped Number of fixed knives 2 x 1 Number of moving knives 3x3 cutting chamber dimension 300480 mm Sound-absorbing housing spoil collection system with fan and stepped cyclone  ... más información