Fabricante:
(Categoría: 1403)
Required scope of delivery for the Slip-through protection: 01x U-profile, used Material color: cream white Total length: approx. 1,860 mm Profile dimensions: 60 x 45 mm including 2 swivelling agraffes Number of hooks: 4 HK (hooks per agraffe) 02x safety pins, used Material color: sendzimir galvanized For more information: Shelving system: Vogelsang Type: NS suitable for clear width: approx. 1,800 mm Superstitut: approx. 70 mm Two original agraffes are attached to the U-profile. With the help of this, the Durschschubsicherung suspended in the stand and with safety fixed. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at ...
We offer you a railing post from SSI Shepherd for sale. Included in delivery are: 01x railing posts, second choice Material color: Ral 7001 Silver Gray Manufacturer: SSI Schäfer Total height: approx. 1.030mm Profile: 55 x 30 x 2.0 mm (D x W x S) Base plate: 120 x 80 x 15 (W x D x H) Diameter round tube opening: approx. 35 mm Distance of holes: 315 mm ( middle center hole ) Weight pcs.: approx. 3,37 Kg Notes: - The railing post is open from above. If desired, you can get matching plastic caps. - The heights of the round tube openings are: 345, 660 and 975 mm ( Measured from lower edge base plate to lower edge round tube opening ) - suitable for round tubes with a diameter of 34-35 mm - For fastening we recommend 4 screws M8 (8.8) - Slip-through opening must not be larger than 900 mm. - If the railing posts are drilled through a beam ( CS, C or IPE ), then no count ...
We offer you here a used L-Angle for purchase. Included in delivery are: 01x L-Angle, used Material color: orange Surface: lacquered Profile: L-Profile Profile: 100 x 50 x 2.5 mm Total length: approx. 1,200 mm Hole spacing: 50 x 50 mm (hole center to hole center) Weight / pcs approx. 3,893 Kg In the L-angle are 16 holes with a diameter of about 10 mm available. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 ...
Required scope of delivery for the Slip-through protection: 01x U-profile, used Material color: orange Total length: approx. 2,760 mm Profile dimensions: 80 x 45 mm including 2 swivelling agraffes Number of hooks: 4 HK (hooks per agraffe) 02x safety pins, used Material color: sendzimir galvanized For more information: Shelving system: Vogelsang Type: NS suitable for clear width: approx. 2,700 mm Superstitut: approx. 70 mm Two original agraffes are attached to the U-profile. With the help of this, the Durschschubsicherung suspended in the stand and with safety fixed. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a gla ...
We offer you a flat steel pallet here II Choice for purchase. Technical data for the flat steel pallet: Manufacturer: SSI Schäfer Type: SP 1283 F-I Included in delivery are: 01x flat steel pallet, II choice Surface: lacquered Material colour: RAL 6011 Reseda green Number of runners: 3 pieces Dimensions: approx. 1,200 x 800 x 132 (LxWxH) Load: approx. 2,500 Kg General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 ...
We offer you a collision protection guardrail here for purchase. Included in delivery are: 01x Collision protection guardrail, used Total length: approx. 2,530 mm Clear width: approx. 2,350 mm Total height: approx. 600 mm Total depth: approx. 90 mm Consisting of: 01x CS-Sigma profile, used Material colour: sendz. galvanized Profile abbreviation: C: 300 x 75 x 2 mm Clear width: approx. 2,300 mm 02x posts, used Material color: hot-dip galvanized Total height: approx. 600 mm Incl. 2 welded screw-on plates: approx. 200 x 100 mm Base plate: approx. 200 x 200 x 10 mm Hole diameter: approx. 15 mm General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried fro ...
We offer you an L - collision protection corner for sale. Included in delivery are: 01x L - Collision protection corner, SECOND choice Material colour: similar. Ral 1021 rapeseed yellow Total height: approx. 400 mm Leg length inside: approx. 170 x 170 mm Thigh length outside: approx. 180 x 180 mm Hole spacing horizontal: approx. 100 mm (middle-center hole) Hole spacing vertical: approx. 125 mm (middle-center hole) Internal mounting plate: approx. 165 x 44 x 6 mm Diameter borehole: approx. 14 mm Material thickness: approx. 6 mm Required dowels: 4 pcs. Weight pcs.: approx. 6,90 Kg General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at ...
Current stock: approx. 965 pcs. Included in delivery are: 01x castor, used Manufacturer: Kama Material Color Roll: Red Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 34 mm Bearings: Needle bearings Roll Material: Rubber Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( Oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 55 mm (middle - middle hole) Weight / pcs.: approx. 0.970 kg General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.
Current stock: approx. 400 pcs. Included in delivery are: 01x castor, used Manufacturer: Wicke Type: 01 Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 100 mm Rolls Ø: approx. 80 mm Roll width: approx. 35 mm Tire Material: PA6 Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.556 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery ...
Current stock: approx. 46 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: TENTE Material color roll: gray Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 32 mm Roll material: PP + TPE ← PA6 + PUR Plate abbreviation: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.57 kg
Current stock: approx. 350 pcs. Included in delivery are: 01x Bockrolle, used Material color roll: black Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 37.5 mm Roll material: Solid rubber Rim material: Polypropylene Plate abbreviation: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.803 kg
Current stock: approx. 370 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: Wicke Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 150 mm Rolls Ø: approx. 125 mm Roll width: approx. 40 mm Roll material: Polyamide Plate abbreviation: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.745 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of deli ...
We offer you here a used shelf of the manufacturer SSI Schäfer for sale. Suitable for a stand depth of 500 mm Technical data on the shelf: Manufacturer: SSI Schäfer Type: R3000 Type designation: ZB351020 Included in delivery are: 01x Shelf, used Material color: galvanized Length: approx. 994 mm Depth: approx. 490 mm Height: approx. 40 mm The shelves are used and can be light Have dirt, dents, scratches, etc. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems B2nxkxfje Delivery with our own fleet (without discharge)
We offer you here a used side wall perforated of the manufacturer SSI Schäfer for sale. - Suitable for a stand depth of 500 mm - The side walls are suitable for the Fixing of perforated plate hooks - The side walls are made with screws directly attached to the stand frame Technical data for the side wall: Manufacturer: SSI Schäfer Type: R3000 Included in delivery are: 01x side wall, used Version: perforated Material: Stalblech Surface: galvanized Colour: silver Height: approx. 2,000 mm Depth: approx. 470 mm - The side walls are used and can be easily Have dirt, dents, scratches, etc. Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving s ...
We offer you here a concrete approach protection for purchase. Included in delivery are: Concrete collision protection, SECOND choice Material color: yellow Total height: approx. 1,300 mm Total width: approx. 540 mm Pipe diameter: approx. 32 mm Material thickness: approx. 3 mm Weight approx. 7.0 kg Notes: - This concrete protection is suitable as collision protection and impact protection for production areas, Warehouses, high racks, shelves and other areas of the company with freight and freight transport. - optical, effective demarcation General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a glance: (Prices on request) ...
Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...
Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...
Specifications: Manufacturer: SSI Schäfer Type: Traka 14-6 Surface: Ral 5002, ultramann blue Dimensions: 600x400x120 mm Weight: approx. 2.84 kg Total quantity: approx. 2640 pcs Hole scheme: 117 Floor + all 4 side walls offset Round perforation Ø: approx. 12 mm Distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stack boxes of second choice. There may be scratches, dirt or color defects. General information about the article: This item is offered for pickup only. A desired transport or dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspecti ...
Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 800 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in delivery are: 02x workbench stand, new Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.
Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 1,000 mm We offer you here a used workbench frame of the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in delivery are: 02x workbench stand, new Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 110 x 50 mm Clear width: 2,700 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.