máquinas para encoger usadas para la venta

Very well maintained shrink tunnel , 400 V, 13 KW  ... más información

Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.  ... más información

Item condition: Top maintained Availability: as of now 20 packs/min Standard basic equipment - KV 600 HP online Direction of movement of the packaging line from left to right; Right-hand side Inlet and outlet belt belt, built-in: - for the automatic transfer of goods in line - Equipped with separately switched drive motors - If required, with laterally adjustable guides Film roll holder for top and bottom film: - Motor-driven support bearing block - Max. film roll diameter: 250 mm - Controlled film take-off - Centrally adjustable side guides of the film rolls Permanently heated transverse welding system: - working pneumatically; Air consumption approx. 140 NL/min. at 6 bar, dry and oil-free Machine: - Siemens S7; Simatic Touch Panel - Display of operator information, machine status and error messages - 2-fold piece counter; Hour meter Control panel - Control co ...

Packing Machine, Shrink Packer, Shrink Wrapping Machine Manufacturer: Dempack Type: H22 Year of construction: 2005  ... más información

Pallet shrink machine with shrink hoods that descends and completely covers the pallet during the shrinking process. Energy sources: natural gas or liquefied petroleum gas and electrically powered. Function: Driven curtain to close the shrink bell opening Pallet base plate with integrated breather and ramp for Loading by means of a hand pallet truck Catalytic heaters ( No free flame ) Maximum power 13 Kw/hour Max pallet dimensions (standard version) length 1,200; Width 1.200 Height 1,500 mm Number of cycles up to 25 pallets/hour Automatic shrinking process with adjustable shrinkage time Preheating time approx. 30 minutes Operating temperature approx. 200°C - 220°C depending on film thickness

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Kallfass UNIVERSA 5050 - Angle welder Universa 5050 - Shrink tunnel Compact 650 S - Roller delivery On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

AC Automation LC800 semi-automatic L-sealer and shrink tunnel, belt width approx. 350mm, tunnel entrance approx. 350 x 180mm, sealing bar approx 500 x 400mm (L x W). Floorspace 2600 x 1000mm x 1400mm H  ... más información

Meurer Machine type: CM/HBB40-T80 Built :2000 V:400/230 Kw:19  ... más información

Shrink sleeves tunnel, for shrinking sleeves. completely overhauled! YOC 2002 Manufacturer: ARCOR GmbH, Power up to 6000 units per hour. If you have any further questions, please do not hesitate to contact us  ... más información

Kallfass Universa 400 with shrink tunnel, SlipTorque roller belt and conveyor belt Kallfass Universa 400 built in 2005 The system is immediately available. The price of the complete system includes the Universa 400, the Schlichter shrink tunnel, a SlipTorque roller belt and a conveyor belt. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Metronic embossing system - Control: Siemens S7-300 - Siemens Touch TP277 operator terminal - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel-knife system - Processable films PE and PO - Year of construction 2005 - Simple shrink tunnel DS-600 with switchable rotating bars - Conveyor belt 1000 x 400mm - SlipTorque roller conveyor 2 ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

description: High quality control unit for bottle conveyors for 14 Motors. The KHS switchboards are air conditioned. The Danfoss inverters are overhauled and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered. All information without guarantee. propulsion: 14 x SEW Movigear MGFAS4-DSM/WA/PE Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Co ...

Welding bar dimensions: 500x380mm, max. film roll dimensions: 300x600mm, max. pachaging dimensions: 500x380x200mm, length: 1275mm, width: 700mm, height: 1095mm. ... más información

Operational hours: ca. 2200h, including gripper feeder and Shrinking Tunnel PACKTECH Minipack. ... más información

Max. pallet format: 1200x1000mm, max. pallet height: 1800mm, max. pallet weight: 2t, output: 30 pallets/h, connected load: 1.5kW, fuel: natural gas/propane gas, with documentation, an inspection is possible. ... más información

Welding frame format: 550x410mm, packing dimensions welding/ shrinking: 530x390x200/ 500x360x200mm, film width: 200-500mm, roll diameter: 260mm, connected load: 2.6kW. ... más información

Operational hours counter: ca. 14,000h. ... más información

Output: 30-50/min, connected load: 20kW, length: 9500mm, width: 3500mm, height: 2200mm, including documentation. ... más información

Connected load: 13kW. ... más información