instalaciones de granulado usadas para la venta

Rotor Diameter: 800 mm // Output Capacity: 1200 kg/h ... más información

Minimum Diameter: 110 mm // Maximum Diameter: 200 mm ... más información

Rotor Diameter: 1000 mm  ... más información

Maximum Diameter: 2000 mm // Number Of Belts: 14  ... más información

Output Capacity: 1000 kg/h ... más información

This Granulator from Rapid is in the Plastima Used Machinery machine storage area. The machine is from 1995. – Brand : Rapid – Model: 1514 – Roter diameter: 150 mm – Inlet width: 140 x 140 mm – Motor power: 1.5 kW – Number of rotor knives: 2 knives – Year built: 1995

This Granulator from Rapid is in the Plastima Used Machinery machine storage area. The machine is from 1995. – Brand: Rapid – Model: 1514 – Roter diameter: 150 mm – Inlet width: 280 x 280 mm – Motor power: 2.2 kW – Number of rotor knives: 4 knives – Year built: 1995

photos taken before reconditioning, Series 80-49 DN Rotor width 800 mm. diam.450 mm. 45 kw motor Granulation chamber 840 x 490 mm. Complete with conveyor belt Feeding hopper N.2 screens Control panel The machine is offered TOTALLY RECONDITIONED, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery)

Maximum Diameter: 300 mm ... más información

This Granulator from Rapid is in the Plastima Used Machinery machine storage room. The machine is from 1996. - Brand: Rapid - Model: 8045-KP - Roter diameter: 450 mm - Year of construction: 1996  ... más información

Recycling machine trade AGICOM-Pedergnana OG: Granulator PM1840 used and ready for use. A powerful single-shaft shredder/pre-shredder for electrical cables. Throughput: 250 - 300kg/h (electric cable)  ... más información

Diebel RMH 18/45 pelletizing system for cables, plastic Manafacture: Diebels Type: RMH 18/45 Year of construction: 2011 Drive: 7.5 kW Filling opening: 460 x 225 mm Rotor diameter: 180 mm Sieve hole: 4 mm Replacement screens: 2 pieces, 2 / 3 mm Throughput (plastic): 60-80 kg/h Weight: 320 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Recycling machine trade AGICOM-Pedergnana OG: The T150 cable recycling plant is suitable for the recovery of copper and aluminium from electrical cables. The T150 is equipped with an integrated turbine mill and also with a zig-zag separator - a novelty in this size! Due to these integral components, the T150 system is also ideally suited for the processing of mixed and stranded cables, as well as data conductor or EDP cables. Specifications Feed material: Mixing cable iron-free Throughput: up to approx. 150 kg / h

Recycling machine trade AGICOM- Pedergnana OG: The Easy 120/180 is a high-performance recycling system for the extraction of copper and/or aluminium from old and residual cables. The machine is characterized by a small footprint, simple operation and low energy consumption. Feed material: Electrical cable without impurities Throughput: approx. 60 to 120/180 kg/h

TRIA GRANULATOR 42-20 BLT, infeed 340 x 200 mm., grinding surface 420 x 200 mm., 4 kw drive, n.3 rotating knives, n.2 still knives, 5 mm screen holes (or bespoke), extraction with drawer ... más información

Cable recycling plant with many innovations in all plant components for up to 600 kg/hour (depending on material) The basis of this recycling plant is modularly constructed from strong and innovative individual components. In the standard version, the following structure is obtained. - Preshredder MR 4080 or MR 40-100 - Conveyor belt with magnetic separator - controlled by PLC - Granulator C 600 with axle length 600 mm, 5 rotor blades and 37 kW drive, cooling of the housing by unit against adhesions - Z-separator for the separation of heavy copper or 1 granulate - Dosing drum for the optimally uniform feeding of the following turbine mill - Ghibli 545 turbine mill (new model), optionally with coolable housing and inverter control - SA 600 separation table, new version with PLC inverter control of the air volume + eccentric drive with inverter control of the oscillation + adju ...

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

Used cable recycling plant Tecnoecology T 250 Turbo Year of construction: 2008 The plant consists of the following parts: - Pre-shredder: Bano MAC 630, approx. 250 - 400 kg/hour, depending on material - Conveyor belt to the dosing accumulator, approx. 4.0 m - Dosing accumulator with discharge conveyor, approx. 1.5 m³ - Controlled conveyor belt with belt magnet for feeding the granulator, approx. 4.0 m - Granulator GA 400/30, approx. 250 - 400 kg/hour, depending on material - Turbine mill, T 25-2, built in 2019 - Separator TV 300, inverter controlled, separation table 80 μm - Dust extraction and filter system The entire system currently achieves between 200 and 300 kg/hour in operation, depending on the cable composition. On request, additional components, such as a big bag loading for the plastic or the re-screening of the granules, can be supplied. The plant is curre ...

Recycling machine trade AGICOM- Pedergnana OG: Cable recycling plant used consisting of single-shaft shredder MR1740; Granulator CGM4050; Zig Zag Separator; Turbine mill Ghibli 352; separator, filter tower; Throughput approx. 300 kg/h. Details on request!  ... más información

Compact but powerful machine for processing old cables up to approx. 25 mm in diameter. The nominal output of the system is 120 kg/hour when using a 4.0 mm perforated screen. By using a pre-shredder, the performance can be significantly increased, then stronger cables are also possible. The machine has been checked and modified in our workshop. - new dividing table - new set of knives - new sieves - new seals - Connection for refrigeration unit - Connection for feed and conveyor belt On request, we can supply additional accessories for the machine, such as: - Pre-shredder -Magnetic drum - Dosing accumulator - Refrigeration unit - Dust filter - Screening drum - Bigbag stand with air conveyance for plastic granules