prensas usadas para la venta

Bin Compactor BTS-240L Bin Compactor With the BTS-240L Bin Compactor for 240 Lt. garbage bins large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing bin volume up to 80%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 80% - Reduces frequency of waste collection - Useable for wet and dry household and commercial waste - Optimum utilization of waste container - Reduces the number of waste containers - No climb into the garbage container more - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 2 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x D): 2360 x 780 x 780 mm Transportation height: 2360 mm Machine weight: 234 kg  ...

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 550 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

Waste Baler BTS-MF450 The BTS-MF450 Waste Baler is ideal for compacting loose cardboard, paper and film. By compacting these recyclable materials users receive a volume reduction of up to 90% and this saves disposal costs. The baling press impresses with its ease of use and large filling volume. The finished bales can be easily removed from the baler with the automatic bale ejector. - Bale weight output of up to 450 kg - Suitable for baling of cardboard, film, clothes, cans, Big Bags and many materials more - Automatic bale cycle - Retaining claws to prevent spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power supply: 380-400 V (3 Phase) Machine size (H x W x D): 3000 x 1781 x 1196 mm Transportation height: 2300 mm Machine we ...

BTS-Bag Press With the BTS-Bag Press for waste bags large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing the waste volume up to 90%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 90% - Reduces frequency of waste collection - Useable for wet and dry waste - Optimum utilization of waste container - Reduces the number of waste containers - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 3 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x ): 1861 x 1200 x 630 mm Transportation height: 1861 mm Machine weight: 325 kg Cycle time: 20 seconds Noise level: 68 dB Compaction up to: 90%

Waster Baler BTS-MF75 The small BTS-MF60 and BTS-MF75 Waste Balers are ideal for compacting loose cardboard, paper and film but also for pressing metal buckets, tins, cans and small drums. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Smallest baler in BTS Waste Recycling Equipment Range - Produces small and compact bales with bale weight up to 75 kg - Ideal for locations where space and height is restricted - Suitable for compacting cardboard, film, clothes, also crushing cans and buckets - Ideal for compacting small volume of waste - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 2335 x 1040 x 720 mm Transportation height: 1800 mm Machine weigh ...

PET-/ Can Compactor, Special Waste Baler BTS-MF60hd The BTS-MF60hd Cans_PET Special Waste Baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and many more. The special waste baler impresses with its ease of use and large filling volume, finished bales can be easily removed with the automatic bale ejector. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Solid bales with bale weight up to 70 kg - Compacts a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross strapping tying system to hold difficult material in a bale - Fully automated bale ejector, simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing  ...

Manufacturer: BERGMANN Type: PS 8100 machine Height: 2200 mm Machine width: 1,200 mm Machine depth: 1,625 mm charging height 1900 mm Machine weight: 800 kg engine rated current at 400 V 3.0 Rated current converter 230 volts Motor power: 0.38 2 2 kW Required fuse: 10 A, 13 rpm protection: IP 54 (D), (E) Fire hydraulic oil: HLP 32 Bale weight: 150-400 kg capacitance: 1 m3; ready for use

Plate suspension set to R & B Chamber filter press  ... más información

1 PAAL horizontal tunel press type PAC, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material ... más información

Waster Baler BTS-MF60 The small BTS-MF60 and BTS-MF75 Waste Balers are ideal for compacting loose cardboard, paper and film but also for pressing metal buckets, tins, cans and small drums. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Smallest baler in BTS Waste Recycling Equipment Range - Produces small and compact bales with bale weight up to 60 kg - Ideal for locations where space and height is restricted - Suitable for compacting cardboard, film, clothes, also crushing cans and buckets - Ideal for compacting small volume of waste - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 1996 x 1040 x 720 mm Transportation height: 1630 mm Machine weigh ...

Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor

Screw trough approx. 2,800 x 660 mm, screw diameter: 370 mm, 2-cylinder solids pump SP2180-400, capacity 8 cbm/h, with a distribution station and hydraulic unit with 55 kW ... más información

sell a Strautmann PET BP 900 for PET bottles! Built in 2006, just a few hours of operation!  ... más información

Technical data: engine: 7.5 kW / 400 V weight: 1.8 t mole lid pressure: 20 t ground rams pressure: 40 t working pressure: 220 BARS filling box dimension (L x B x T): 81.5 cm x 35 cm x 51 cm parcel dimension (L x B x material amount): 35 cm x 20 cm x variable length (material amount) Presszyklus: approx. 1 minute dimensions (L x B x H): 2.45 metres x 1.20 metres x 1.40 metres CE norm

Technical data: model: RMH 60 x 40 – T 100 or T - 150 machines dimensions without preloading box / side case box L x B x H / in metres 4.50 x 1.60 x 2.10 loading box dimensions: L x B x T / in cm: 130 x 60 x 61 parcel dimension in cm: 60 x 40 x material amount engine kW / volt: 15 / 400 or 22 / 400 mole lid pressure in T: 50 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T: 100 or 150 ground ram piston rod Durchmesser:220 mm working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 6600 control: by hand the RMH 60 x 40 metal press and scrap metal presses is likewise able to come with lateral hydraulic preloading box are delivered and also with different Press force in the ground ram, 100 metric tons and 150 metric tons.

Model RMH 50 x 30 - 65 machines dimensions without preloading box / side case box L x B x H / in metres 4.10 x 1.40 x 1.95 loading box dimensions: L x B x T / in cm: 110 x 50 x 54 parcel dimension in cm: 50 x 30 x material amount engine kW / volt: 11 / 400 ///// Optionally with 22 kW / 400 mole lid pressure in T.: 40 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T 65 Optionally also with 100 or 150 metric tons press force ground ram piston rod diameter: 200 mms working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 4900 control: by hand optionally also with lateral preloading box available

Technical data: model: RMH DK 50 x 70 machines dimensions without preloading box / side case box L x B x H / in metres: 4.46 x 1.34 x 2.43 loading box dimensions L x B x T / in mm: 1.575 x 840 x 700 parcel dimension in cm: 50 x 70 x material amount engine kW / volt: 22 / 400 ground rams pressure in T: 100 working pressure in BAR: 240 Presszyklus/seconds: 75 weight in kg: 7300 control: By hand / Automatk all machines are delivered in the state kind equipment with hand lever control and oil cooler. Optionally with lateral preloading box and radio control available.

Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper ...

Pressing force: 3.5 tons Connection: 400 V Engine: 1.1 kW Container: 660-1100 litres Height open: 1930 mm Width: 1210mm Depth: 1200mm  ... más información

Pressing force: approx. 8 tons Connection value: 230 V 1.5 kW Filling shaft: 630x460x750 mm Bale size: 630x460x700 mm Bale weight: approx. 30 - 80 kg Machine size 830x970x1870 mm WxDxH Machine weight: 360 kg Warranty: 12 months Condition: technically and optically revised Completely overhauled with new paint!