prensas usadas para la venta

Specifications Maximum pressure: 78 tons Pressing force: 95 tons/m² Duct cross-section: 750 x 1100 mm Bale weight: 450-600 kg Power supply: 400 V/ 55 kW Year of construction: 2001 Number of ties: 5-fold vertical, Dimensions of the tailgate: 1500 x 1100 mm Weight: approx. 24 tones  ... más información

Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Baler Presona LP 50 EH2, built in 2005, baling force 50 t Specifications: Manufacturer: Presona Sweden Type LP 50 EH2 Year of construction 2005 Press force 50 t Drive 37 kW Throughput rates at bulk density of 50 kg/m³: 11-13 t/h 100 kg/m³: up to 25 t/h Filling opening: 1250 x 1100 mm Bale size 1100 x 720 mm Bale weight: 400-550 kg Bonding 5-fold Transport dimensions approx. 8100 x 2120 x 2680 mm (LxWxH) Weight approx. 15 t The press is currently still in operation and can be viewed on request. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw  ... más información

Hopper opening 400x500mm Control panel Connection 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Dry boxes (for wet boxes a 3 phase machine is better) Non-corrosive Mobile on wheels Density 175-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60 Hz LxHxW 1950x1600x630 mm, Possible additions : exit tray, tub for exit tray, Stainless Steel version, See the chart below for other sizes, installed power : 1.5

Mil-tek waste compactor 205TS 2445 x 745 x 545RA2168Type: 205 TSYear of manufacture: 2009Condition: functionally tested, usedoptical: traces of useHeight: 2445 mmWidth: 745 mmDepth: 545 mmPressure: 2250 kg at 8 barSafety valve: 11 barWaste bale size: 840 x 650 x 415 mmAutomatic bale ejectionOwn weight: 240 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2009Operation / joystick: JA, oben an BedienseiteOperating pressure: 8 BarLength base: 747Transport weight in kg: 240 kgHeight in mm: 2445Breite Basis: 545waste bale size: 840 x 650 x 415 mmPressing force: 2500 kg @ 8 BarFor individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your ...

A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute.Technical data baler:Manufacturer BOAType Impress D130.110.B.5-(5R).1.6Year of construction 2009Press power main press 127 tonsSpecific press capacity 10,7 kg/cm²Working pressure 280 barFeed channel 1.620 x 972 mm (l x w)Press volume / cycle 4,1 cbmVolume throughput without load up to 865 cbm/hourCycle time under operating conditions 22 sec.Press stroke 2.900 mmBale size 1.100 x 1.100 mm (w x h) length adjustableDriving power 2 x 55 kWConnected load 132 kWTying system 5-fold vertical, 5-fold horizontal, fully automatedThroughput rate at abulk weight of 30 kg/cbm up to 17 to/hbulk weight of 50 kg/cbm up to 29 to/hbulk weight of 100 kg/cbm up to 37 to/hbulk weight of 150 kg/cbm up to 51 to/hBale weight up to 1.200 kgVolume hydraulic oil tank 1,850 LSPS contro ...

Technical data baler:Manufacturer according to type plate BRAMIDAN (original manufacturer Kampwert Umwelttechnik GmbH & Co. KG) Type HC 50 (formerly HPK 50 BK)Year of manufacture 2007Operating hours 11,970 hours, as of MarchPressing force 50 tonnesSpecific pressing force 650 kN/m²Feed chute dimensions 1250 x 1050 mm (L x W)Filling volume 0.96 cm³Theoretical cycle time 32 secondsTheoretical throughput capacity 108 m³/hourBale dimensions 1100 x 700 mm (w x h) length variableDrive power 15 kWPower consumption, total in 50 ATying 4-fold vertical, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3.1 t/hourBulk weight of 60 kg/cbm approx. 4.5 tonnes/hourBulk weight of 100 kg/cbm approx. 7.2 tonnes/hourBale weights with a bale length of approx. 1.2 m up to 500 kg, depending on materialHydraulic oil tank capacity 400 litresPLC control Siemens S7-200 Effective transport  ...

Specifications Maximum pressure: 4.6 tons Press force: 1.31 kg/cm² Bale size: 500x700x700 mm Power supply: 400 V/ 1.1 kW Year of construction: 1993  ... más información

Baler Presto CC 20 M, built in 2019, baling force 20 t, with restraint device Specifications: Manufacturer: Presto Type: CC 20 M Year of construction: 2016 Press force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Binding: 4-ply, tape, manual Throughput at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, w ...

Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 112Year of construction 2002Operating hours 43,954 hours, stand MarchPress power main press 200 tonsSpecific press capacity 16,5 kg/cm²Feed channel 2,000 x 1,020 mmFilling volume 2,65 cm³Theoretic throughput rate 795 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 75 kWTying system 5-fold horizontal, full automaticThroughput rate at MSW approx. 48 up to 54 tons/h, depends on materialVolume hydraulic oil tank 3,100 lMachine weight baler approx. 50,8 tonsScope of delifery:1 piece baler MACPRESSE, type 111A1 operating manual with CE declaration, electrical and hydraulic circuit diagramComments:As can be seen in the photos, some maintenance work needs to be carried out. The seal set of the main hydraulic cylinder must be replaced. In general, the hydraulics should be cleaned and a seal replaced here and there.  ...

Package dimension in cm: 50 x 30 Weight: 4900 kg Dimensions ( L x W x H ): 1100 x 500 x 540 mm Propulsion: 11 KW Ground driving pressure: 65 t Control: Manual With side loading box  ... más información

For sale is a used, complete baling press system consisting of a chain belt conveyor for underfloor operation, with steel substructure and pit cover, a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire.Technical data baler:Manufacturer MACPRESSE EUROPA S.R.L.Typ 111AYear of construction 1996Press power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 1,800 x 1,020 mmFilling volume 2,5 cm³Theoretic throughput rate 750 m³/hBale size 1,100 x 1,100 mm, length variableDriving motor 2 x 55 kWTying system 5-fold horizontal, full automaticThroughput rate at a approx. 30 up to 35 tons/h, depends on materialVolume hydraulic oil tank 3,000 lTransport dimensions of press with new machine feets 13,100 x 2,550 x 2,780 mm (l x w x h)Machine weight baler approx. 40 tonsSc ...

Technical data baler:Manufacturer PresonaType LP 40 EH1 PETYear of construction 1998Operating hours 37,884 hours, data according to operating hours counter, as of MarchNo. of bales pressed 311,714 pieces, data according to bale counter as of MarchPressing force of main press 40 tonnesSpecific pressing force 5.2 kg/cm²Dimensions of feed chute 1,250 x 1,100 mmFilling volume 2.2 cm³Theoretical throughput 290 m³/hourThroughput capacity under operating conditions 160 m³/hourBale dimensions 720 x 1100 mm, variable lengthDrive power 15 kWConnected load, total 18 kWAbsicherung min. 50 A, max. 63 A5-fold vertical binding, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3 to 4 tonnes/hourbulk density of 50 kg/cbm approx. 5 to 6 tonnes/hourbulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hourFilling volume of hydraulic oil tank 600 litresEffective transport dimensions ex ...

Technical data baler:Manufacturer BOAType 2040.S.5V.71.37Year of manufacture 2003Operating hours approx. 35,598 hours, as of MarchPressing force main press 71 tSpecific pressing pressure 9.1 kg/cm²Operating pressure 280 barDimensions of feed chute 1,620 x 1,080 mmBale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mmDrive power 37 kWTying system 5-fold vertical, fully automaticThroughput rates for quality:B12 / B19, 40 ? 60 kg/cm³, up to approx. 9 t/hour, bale weight up to 850 kg/bale, depends on materialHydraulic oil tank capacity 800 lTransport dimensions 10,020 x 2,400 x 3,400 mm (l x w x h)Machine weight press approx. 24 tNoise level

Technical data baler:Manufacturer PresonaType LP 40 EH1 Year of construction 1995Operating hours 16,917 hours, data according to operating hours counter, as of MarchNo. of bales pressed 28,745 pieces, data according to bale counter as of MarchPressing force of main press 40 tonnesSpecific pressing force 5.2 kg/cm²Dimensions of feed chute 1,250 x 1,100 mmFilling volume 2.2 cm³Theoretical throughput 290 m³/hourThroughput capacity under operating conditions 160 m³/hourBale dimensions 720 x 1100 mm, variable lengthDrive power 18,5 kWConnected load, total 26 kWAbsicherung min. 62 A, max. 100 A5-fold vertical binding, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3 to 4 tonnes/hourbulk density of 50 kg/cbm approx. 5 to 6 tonnes/hourbulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hourFilling volume of hydraulic oil tank 600 litresEffective transport dimensions exc ...

Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Vertical baler HSM VL 500.2, built in 2007 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2007 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Vertical baler HSM 155.2 VL, built in 2003 Specifications: Manufacturer: HSM Type: 155.2 VL Year of construction: 2003 Press force: 16 t Drive power: 4 kW Filling opening: 1100 x 590 mm Filling height: 730 mm Press box dimensions: 1100 x 700 x 1130 mm (WxDxH) Bale size: approx. 1100 x 700 x 700-1000 mm Capacity per hour: approx. 4-8 bales Theor. Idle cycle time: 24 s Dimensions: 1400 x 1200 x 2300 mm (WxDxH) Weight: 1300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Specifications Maximum pressure: 50 tons Press force: 7.14 kg/cm² Duct cross-section: 1000 x 700 mm Bale weight: do 500 kg Power supply: 400 V/ 30 kW Number of ties: 3 horizontal Dimensions of the tailgate: 1250 x 950 mm Weight: about 10 tons Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the duct. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the press chamber for easy maintenance