trituradoras usadas para la venta

Single-shaft shredder, 30 KW drive power, 800 mm working width, incl. discharge screw, Total height 2,000 mm, total width 1,800 mm, total length 2,850 mm Insertion opening 1,100 x 1,500 mm, perforated sieve 30 mm  ... más información

Intimus 16.86 aktenvernichter mit presse - Shredder with press shred size 7.8 x 55 mm  ... más información

Technical data paper shredder:Manufacturer BollegraafType HBS 110 - 1500Year of manufacture 1994Drive power 110 kWThroughput approx. 25 t/hourDimensions of feed hopper 1,970 x 2,000 mmDimensions of built-up machine 3,160 x 4,400 x 3,980 mm (L x W x H)Weight approx. 11.5 tSpecial features:The drive unit is equipped with a hydraulic fluid coupling that minimises current peaks during start-up and operation. The rotor is mounted on oversized roller bearings and equipped with replaceable hammers that are extremely wear-resistant.Range of applications:The shredder was used to shred paper, cardboard, newspapers, magazines, books, etc. in order to achieve optimum compaction and dimensional stability of the bales in the downstream baling press. Condition of the shredder:The shredder is in good working condition and will be dismantled at the end of April. Scope of delivery:Shredder with feeding h ...

Technical data cardboard shredder:Manufacturer Presto GmbH & Co. KGType PZAYear of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021Throughput volume 130 m³/hourSpeed 37/9 rpmMotor power 7,5 / 2,2 kWElectrical connection 32 ADimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H)Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h)Machine weight 0,45 tonsUse of the systems:The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds  ...

used single-shaft shredder Manufacturer: LINDNER Type: VEGA 1100 L Year of construction: 2013 specifications: Filling volume: 1.7 m³ Working opening: 1,100 x 1,800 mm Rotor length: 1,090 mm Rotor flight circle: 434 mm Rotor speed: 100 rpm. Drive power: 45 kW Pneumatic pusher: 6 bar Weight: approx. 6,000 kg

Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Drive: 75 kW Application: Shredding of all impact-brittle materials such as - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)  ... más información

Kleemann Baking Crusher Unit composed of: Pusher wagon Dim.: 6500 x 1300 mm Incl.: Electric motor Grizzly screening machine Screen area: 3500 x 1400 mm – 2 deckers Incl.: electric motor and springs Baking Crushers Type: SSTR 1250 Inlet opening:1250 x 950 mm Incl.: Electric motor Weight about 38 tons.

Hosokawa Alpine Cutting Mill Rotoplex 20/12 RO, year of construction 1993, universally applicable Specifications Manufacturer: Hosokawa Alpine Type: 20/12 RO Year of construction: 1993 Motor power: 1.5 kW Speed: min-1 750 Number of rotor blades: 2 Number of stator knives: 3 Sieve: Weight: 110 kg Including replacement screens in different sizes and spare knives. Complete technical documentation available.

Engine: Diesel engine CAT C9 Power: approx. 261 kW / 350 PS - Waves with 7/7 writing with 5 knives per write (regenerated) - Refractive beam with comb (regenerated) - Chain drive - Discharge belt with discharge height of approx. 3,400 mm - Permanent - Belt magnet with hydraulic height adjustment -Remote control Weight: approx. 24 t regenerated according to HAMMEL standard

Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Untha RS40 Shredder Year: 12/2019 Technical data RS40 Rated capacity 30/37/44 kW Cutter clearance 750/1000 x 700mm Number of shafts 4 pcs Speed of the main shafts 24 rpm Speed of the secondary shafts 32 rpm Ø perforated screen 15-40 mm Weight 3300/3600kg  ... más información

machine measurements: -- mmmachine weight: 1.500 kgpower capacity: 30 kWCondition: used,Specification: shredder/Shredding plant with two shredders type: WLK 6 S / 30 V-rotor Weima low and slow speed rotor, and second shredder make: AMIScomplete plant ready for operation, incl. hopper with lidand platform.Special accessories:- automatic star-delta start-up- gear motor with transport screw- lid with limit switch- quick-change sieve- Hopper can be lifted manually- Equipment for underfloor installation consisting of hopper elevation, guard rail, external emergency stop WLK version with sound insulation, sound-insulated lid and front doorTechnical data:- Hopper volume: 0.9 m³- Operating voltage: 3x 400 V- Motor power main drive: 30 kW, 1,500 rpm- Motor power hydraulics: 1.5 / 2.0 kW, 1,500/3,000 rpm- Weig ...

SHREDDER KOMPTECH TERMINATOR 5000 E incl. control cabinet  ... más información

We offer you a semi-mobile Maier crusher. This used to shred wood, paper, etc. The counter cutting edge was converted with gas pressure cylinders to rise in case of faulty parts (such as Büffel Doppstadt). The machine is mounted on a semi-mobile steel frame to be manoeuvred on the premises. Currently, 90 KW of electrical power are installed. However, the gearbox can absorb up to 250 KW of power.

GRANULATOR TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition incl. 3 sets of rotor knives and stator knives incl. 2 sets of screens, 5 and 8 mm IMMEDIATELY AVAILABLE AND READY FOR USE  ... más información

Complete wood shredder line, shredder motor 55 kW. Composed of: - Shredder type Jenz with vibro feeding table - 1 piece discharge conveyor - 1 piece magnet It all fits on a standard tarpaulin truck.  ... más información

DESCRIPTION ITS twin-shaft shredders with low speed and high torque designed to guarantee high performance and maximum reliability in the shredding of tough or bulky materials. Their solid and sturdy construction surpasses any other shredder on the market. As previously said: Given the large size of the grinding chamber and the solid construction, they are particularly suitable for grinding bulky and tough products such as wooden pallets, cardboard cores, metal scraps of various kinds and sizes, stacks of paper / cardboard sheets and many other materials that are usually difficult to grind. APPLICATIONS Large rolled up carpet Cardboard cores Pile of cardboard sheets Metal scraps WORKING PRINCIPLE The material is fed through a loading hopper placed above the grinding chamber which contains two rotating hexagonal shafts, equipped with circular blades of prede-fined thickness w ...

Impact mill Kleemann (for sand) Brand: Kleemann Type: 825 Inlet opening: 790 x 140 mm Incl: electric motor 160 kW  ... más información

Catalog No. 6796 TECHNICAL DATA - inlet width 410mm - inlet height 150mm - shaft diameter 800mm - number of knives 3 pcs - knife length 410mm - from the bottom, 6 pulling shafts, toothed - 2 pulling rollers, toothed from above - reverse gear - autoreverse - length of the conveyor belt 3500mm - width of the conveyor belt 390mm - main engine 37kW - feed motor about 4kW - feeder drive motor about 3kW - dimensions of the machine length / width / height 3300x2300x1900mm - feeder dimension length/width/height 3600x800x1000mm - weight about 7500 kg ADVANTAGES – Polish production – with a feeder – technical documentation – used chipper, very good condition Net price: PLN 75900 Net price: EUR 16323 Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Secondary shredder with feed hopper with screw discharge Rotor 1000 mm diameter x 700 mm wide 10 rotor blades, 2 stator knives Motor 110 kW (other motor size available on request) ... más información