Fabricante:
(Categoría: 503)
Cross-flow scraper mobile version for the treatment of mixed waste fractions (municipal waste, biowaste, scrap metal, packaging, etc.) - Material input via vibrating chute - Efficient shredding in QSZ (1,600 mm) - Material transport via discharge belt below QSZ - Material discharge via conveyor belt (foldable) - Metal sorting by means of an overbelt magnet (neodymium) - Hook lift holder for transport - Motor power: 160 kW, 50 Hz, 400 V -Material discharge: screen discharge made of wear-resistant steel, screen plates are individually replaceable, Various hole geometries and sizes possible, external discharge box with flange connection for dust extraction - Contaminant discharge: discharge opening with hydraulically operated slider, incl. hydraulic unit and inductive end position sensors - percussion mechanism: chain mounting system for the use of up to fo ...
Hello, I have a chipper for sale with a 6-cylinder John Deere engine, about 250 HP The chipper, despite its age and appearance, is fully operational. Its strong advantage is its very simple structure. It does not require a complicated service for simple repairs. The same applies to the operation, which is very intuitive. A chipper for a wide variety of needs: - Various types of wood waste - The cuts - Pallets - The bark - blocks, waste - and many others Capacity about 80 m3 / h depending on the material, operator efficiency, type of material and sieves It is possible to install different sizes of screens depending on the needs The wide charging with dimensions of 4.10m x 1.90m allows you to backfill even with very large loaders The working width of the roller is 1.45 m and the sieves have a mesh size of 8 cm x 8 cm. Chippers of this type and power, regardless of age, kee ...
The shredder breaks large bulky parts made of polystyrene and EPS and similar substances with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by about 65%. Thus, machine is ideally suited for use in industrial and craft companies as well as for the wholesale and retail trade with packaging material made of Styrofoam. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Depending on the sieve set, a volume reduction of 3 : 1 takes place just by shredding your polystyrene residues. Custom-made products are available on request. VAT will be shown separately on the invoice. Shipping Germany-wide included, islands with surcharge. If you have any questions, please do not hesitate to contact us.
Shredder Vecoplan, type HR 75/35, for wood, packaging material, bark, wood waste Manufacturer: Vecoplan Type: HR 75/35 Year of construction 1987 Drive: 45 kW Filling opening: 750 x 350 mm Rotor diameter: 700 mm Number of cleavers: 2-4 Chopping length: 5-30 mm Throughput: max. 35 cbm/h Screen hole: 65 mm, 2 x 35 mm Dimensions: approx. 1500 x 1500 x 1400 mm (LxWxH) Weight: approx. 4,400 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or for any errors.
Impact Mill Voestalpine Brand: voestalpine Inlet opening: 900 x 680 mm. Drive: 55 kW electric motor. ... más información
SBM Austria Impact Mill Type 8/5/3-SE Inlet opening : 390 x 465 mm Drive : 75 kW electric motor Incl. : steel construction, inlet/outlet hopper & electrical system. ... más información
Impact mill MFL Type R-CI 100-100 Inlet opening 1020 x 760 mm Power requirement 90 kW electric motor Weight 9 ton ... más información
Kleemann Impact Mill Brand: Kleemann. Type: SHB 14-1000 Inlet opening: 1430 x 1050mm Dim. Rotor: 1400 x 1000mm Incl.: electric motor 160 kW ... más información
Kleemann Impact Mill Brand: Kleemann. Inlet opening: 1430 x 900mm Dim. Rotor: 1400 x 1000mm Incl.: electric motor 160 kW ... más información
Hazemag Impact Mill AP 4 complete with drive, spare rotor + spare parts. Capacity: approx. 150 T/h. Power requirement: 35 to 80 kW. Mouth width : 700 x 1000 mm. Weight: approx. 11000 kg ... más información
Impact mill Böhringer RC12 Brand: Böhringer Type: RC12 Inlet opening : 1250 x 1000 mm Drive : Electric motor 100 kW ... más información
Baking Crusher Nordberg-Dragon-Babbitless Mouth width 900 x 650 mm Incl. Motor 75 kW Weight ± 20,000 kg ... más información
Baking Crusher Kleemann Type SSTR Mouth width 400 x 280 mm With new 15 kW motor Incl. new underframe, new pulley and V-belt ... más información
New and unused high-performance shredder type Lindner Power Comet 2800 with pointed knife!. Drive power 2 x 132 kW. 186 pointed knife 43 x 43 mm. Ideal for document destruction, plastic shredding. Weight 29500 kg! Complete with control cabinet, Filling hopper, extraction hood and spare parts package.
Builder: WILLIBALD Model: MINISHARK Engine: PERKINS 130 kW (175 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2015 Hourly Production: 35 m³/h Shredding System: 22 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 8.000 kg ... más información
Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)
CATALOG NUMBER 6631 TECHNICAL DATA - 285x305mm loading hopper inlet - 7.35kW engine - number of knives 3pcs + 2 counter knives - knife size 300x75mm - sieve (2 types) 10mm, 8mm - diameter of the extraction nozzle 100mm - dimensions length / width / height 1070x900x1980mm - weight 613 kg ADVANTAGES - Swedish production - additional sieve - very good condition - used chipper Net price: PLN 22900 Net price: EUR 5089 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)
Wood shredders, plastic shredders, garbage shredders, two-shaft shredders, shredders, shredders used Manufacturer: I.S.V.E. Srl Type: 80-80 D Year of construction: 2003 Insertion approx. 1500 x 900 mm Insertion height approx. 1600 mm Drive 2x 9 kW 380 V Dimensions: approx. 2400 x 1800 x 2400 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Tank scissor dentition, scrap scissor bit attachment for an excavator used MBI ZHEJIANG MANTOVANI MANTOVANIBENNE for MS22 Overall dimensions: 1400 x 1300 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved ... más información
Scrap shear dentition attachment for an excavator unused MBI ZHEJIANG MANTOVANI MANTOVANIBENNE Type MS15-MC Year: 2020 Overall dimensions: 1100 x 1000 x 500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved ... más información