Fabricante:
(Categoría: 503)
ID3253 Doppstadt AK510 K year/Year of construction 2014 approx. 5210 hours/hours 29 t Shredder Shredder ... más información
FOLCIERI GRANUATOR TOP800, 800 mm. wide rotor, 530 mm rotor Ø, 90 kw ABB drive, constructed in 2002, complete with control cabinet, now connected and running, available either AS IS or RECONDITIONED, installed power : 90 ... más información
LINDNER MICROMAT MS2000, rotor length 2.025 mm., n.104 knives, knives size 43x43x23 mm., screen size 50 mm., V-belt 75 kw drive 400V 3Ph.50 Hz 1500 rpm, rotor speed 80 rpm, hydraulic ram, constructed in 1997, offered RECONDITIONED, installed power : 75 ... más información
- Mutton NZ 700 E - Year of construction 2007 - incl. magnet - Incl. all-metal detector and ejection - Incl. feed belt and discharge belt - good condition ... más información
Technical data shredder:Manufacturer Lindner Recyclingtech GmbHType Micromat 2000Year of construction 2012Operating hours 5,842 hours, as of MarchDrive power 160 kWFilling opening 2,790 x 2,405 mmFilling height 2,594 mmCutting chamber volume 4.5 m³Number of sieve sheets 4 piecesDischarge width 2,225 mmInput density 160 up to 200 kg/m³Input granulate
Cutting force: 900 t., Cutting width: 940 mm, Max cutting stroke: 600 mm, Cutting length variable, Cutting strokes per min. approx. 4, Pressure material clamping cylinder: 180 t., Pressing force press cover cylinders: 2 x 350 t, Pressure force supply cylinder: 120 t., Press box dimensions, opened: 7000 x 2400 mm., Press box dimensions, closed: 7000 x 940 x 600 mm, Cutting capacity square: 110 mm (e.g. with normal, steel 37 kg/mm²), round 120 mm plate 70 x 700 mm, Production capacity approx. 20 tons/hour,, depending on the type of scrap, cutting length and the load on the machine., Drive power: 1x diesel engine, Scania DC16 500 HP., Pumps High-pressure axial piston pumps with self-regulating flow. Manufacturer Bosch-Rexroth., Year of manufacture: 2012, Weight of the machine approx.: 75,000 KG, Cutting force: 900 tons., Cutting width: 940 mm, Max cutting stroke: 600 mm, Pressure material ...
fire: IDROMEC, Model: T1000x8000LS, Status: Used, non-refurbished, approx. 2,800 working hours, Year of construction: 2008, Shearing force: 1000 ton, Hold down force: 140 ton, Box length: 8 meters., shear throat: 900x700mm, Open box width: 3280mm, power unit: Electro 310 kW, Piston pumps: main pump by Rexroth, Control cabin yes, Remote control AUTEC, PLC: Semi-automatic cutting and baling cycle, Supporting legs: N.4 oversized hydraulic supporting legs/feet, Total weight: approx. 75 ton, Warranty: none, fire: IDROMEC, model: T1000x8000LS, Year of construction: 2008, shearing force: 1000 ton, Hold down force: 140 tons, box length: 8 meters., shear throat: 900x700mm, Open box width: 3280 mm, power unit: Electro 310 kW, Piston pumps: main pump by Rexroth, Total weight: approx. 75 ton, Warranty: none
LINDNER VEGA SINGLE SHAFT SHREDDER, type VEGA 1.650, 90 kw drive, rotor width 1.650 mm., loading hopper : 2,6 m3, shredding surface 1.100 x 1.800 mm., rotor width 1.630 mm, 434 mm Ø, 6 Bar ram, weight : about 8.500 kg, dimensions : LxWxH 3,4 x 2,35 x 2,81 mt., This machine is offered reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), installed power : 90, width: 1.650 mm.
Small but very robust and powerful shredder for a wide range of tasks such as old cables, plastics, wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connections for connecting a cooling unit (e.g. when used for old NYM cables. The machine is and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.
AGICOM recycling machines: Very good, almost as good as new single-shaft shredder for old cables, wood The cutting width or rotor length is 400 mm, 30 mm indexable cutting plates are installed. The machine has a hydraulically driven gate valve equipped with pressure monitoring. The machine has only 35 hours of operation and is still coated with the original paint in the cutting room. • Year of construction 2007 • Propulsion: 9.2 kW • Hydraulic pusher: 1.5 kW • Weight of single-shaft shredder Bano MAC400: approx. 850 kg
total power requirement: 3,0 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,6 x 1,4 x 1,6 mSingle shaft shredder cutting system chip shredderPerformance values: Motor cutting unit 3.0 KWTemperature range 15-40 degrees CelsiusVoltage 400VPower consumption 3.0 KWLength x width x height with flat gear 1.50 mm x 575 mm x 315 mmMounted on a mobile base frameincluding mobile/tiltable bucket cartincluding documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Forrec AE-600R single-shaft shredder: Used and very powerful single-shaft shredder for a wide range of applications. Easy replacement of perforated screen, hydraulic pusher Technical data shredder Forrec AE-600R: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight shredder Forrec AE-600R: approx. 1600 kg
For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg ... más información
We hereby request the following machines and equipment as a package:, Leimbach HS 1400/8000-2500-6/1-L, Brand: Leimbach, Model: HS 1400/8000-2500, Dimensions in mm (LxWxH): approx. 26400 x 10750 x 5950, Year of construction: 2014, Operating hours: 11,000 hours, Weight: approx. 390 t, Technical data:, Operating pressure: 350/315 bar, Shear force: 1400 kN, Cutting width: 950mm, Blade opening: 850mm, Side basket height: 800 mm, Cut per minute: approx.4-6, Pre-press bed:, Case length: 8000 mm, Filling width: 2500 mm, Clear bed height: 1800 mm, Sennebogen 850 E, Crawler R 70 / 490 Material Handling Machine:, Fire: Sennebogen, Model: 850 E crawler R70/490 special., Cab adjustment: E270 hydraulically elevating, Technical data:, Engine Power: 250kW, 400V, 50Hz., Service weight: approx. 63 t., Equipment: K 21, Operating hours: 9800 h, Year of construction: 2014, Lift capacity at 20 m reach: 5.9 t ...
Kleemann Impact Mill Brand: Kleemann. Type: SHB 14 Inlet opening: 1430 x 950mm Incl.: electric motor and inlet box ... más información
Idromec T656 SLK, Type: T656-SLK, SN: 120408, Box length: 6000 mm, Box section: 800650 mm, Shear force: 650 Ton, Hold down cylinder: Yes, Engine: Diesel Cummins, Preloading table: No, Radio remote control: Yes, Automatic function: Yes, Weight: 59 Ton, Year: 2008, Working hours: 12,000, Documents: Yes, CE, Type: T656-SLK, SN: 120408, box length: 6000 mm, Box section: 800650mm, Shear force: 650 tone, Hold down cylinder: Yes, Engine: Diesel Cummins, Preloading table: No, Radio remote control: Yes, Automatic function: Yes, Weight: 59 tone, Year: 2008, Working hours: 12.000, Documents: Yes, CE
WAGNER SINGLE SHAFT SHREDDER WS 70, Only less than 7.000 worked hours, Length:4.680 mm, Width:3.100 mm, Height:2.410 mm, Work area:1.800 x 1.600 mm, Rotor length:1.800 mm (new 2024), Rotor diameter: 588 mm, Number of knives: 104 pc., Drive power: 90 kW, Screen size:40 mm, extraction screw (new 2024), Weight:approx. 12.000 kg, Very good conditions, [Watch Constructors video for this machine](https://www.youtube/watch?v=rDnrhGHvsBQ&ab_channel=WAGNERMasc hinenbauGmbH)
Impact mill Metso-Nordberg Brand: Metso / Nordberg Type: 1315 SR Inlet opening: 1550 x 950mm ... más información
Twin shaft shredder from Erdwich, opening 800x780 mm, hydraulic drive 30 Kw., with control cabinet mounted on frame. 1 set of new knives additionally available. ... más información
Kleemann Impact Mill Brand: Kleemann. Type: SHB 12 Inlet opening: 1430 x 1050mm Incl.: steel construction and inlet box. ... más información