Fabricante:
(Categoría: 503)
Small but very robust and powerful shredder for a wide range of tasks such as old cables, plastics, wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connections for connecting a cooling unit (e.g. when used for old NYM cables. The machine is and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.
AGICOM recycling machines: Very good, almost as good as new single-shaft shredder for old cables, wood The cutting width or rotor length is 400 mm, 30 mm indexable cutting plates are installed. The machine has a hydraulically driven gate valve equipped with pressure monitoring. The machine has only 35 hours of operation and is still coated with the original paint in the cutting room. • Year of construction 2007 • Propulsion: 9.2 kW • Hydraulic pusher: 1.5 kW • Weight of single-shaft shredder Bano MAC400: approx. 850 kg
COMPLETE REFUSE-DERIVED FUEL PLANT WITH HIGH CAPACITY Year of construction 2009 13,500 operating hours - 1 x pre-shredder TYPE VECOPLAN - 1 x Magnet - 1 x air classifier TYPE WESTERIA - 3 x secondary shredder type VECOPLAN - approx. 150 meters of conveyor belts - Electrical control - Spare parts worth approx. € 70 000 Installed capacity approx. 1200 kW Product size 25 to 80 mm according to customer's requirements. We can dismantle the system and load it onto trucks.
total power requirement: 3,0 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,6 x 1,4 x 1,6 mSingle shaft shredder cutting system chip shredderPerformance values: Motor cutting unit 3.0 KWTemperature range 15-40 degrees CelsiusVoltage 400VPower consumption 3.0 KWLength x width x height with flat gear 1.50 mm x 575 mm x 315 mmMounted on a mobile base frameincluding mobile/tiltable bucket cartincluding documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Forrec AE-600R single-shaft shredder: Used and very powerful single-shaft shredder for a wide range of applications. Easy replacement of perforated screen, hydraulic pusher Technical data shredder Forrec AE-600R: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight shredder Forrec AE-600R: approx. 1600 kg
For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg ... más información
We hereby request the following machines and equipment as a package:, Leimbach HS 1400/8000-2500-6/1-L, Brand: Leimbach, Model: HS 1400/8000-2500, Dimensions in mm (LxWxH): approx. 26400 x 10750 x 5950, Year of construction: 2014, Operating hours: 11,000 hours, Weight: approx. 390 t, Technical data:, Operating pressure: 350/315 bar, Shear force: 1400 kN, Cutting width: 950mm, Blade opening: 850mm, Side basket height: 800 mm, Cut per minute: approx.4-6, Pre-press bed:, Case length: 8000 mm, Filling width: 2500 mm, Clear bed height: 1800 mm, Sennebogen 850 E, Crawler R 70 / 490 Material Handling Machine:, Fire: Sennebogen, Model: 850 E crawler R70/490 special., Cab adjustment: E270 hydraulically elevating, Technical data:, Engine Power: 250kW, 400V, 50Hz., Service weight: approx. 63 t., Equipment: K 21, Operating hours: 9800 h, Year of construction: 2014, Lift capacity at 20 m reach: 5.9 t ...
Kleemann Impact Mill Brand: Kleemann. Type: SHB 14 Inlet opening: 1430 x 950mm Incl.: electric motor and inlet box ... más información
Idromec T656 SLK, Type: T656-SLK, SN: 120408, Box length: 6000 mm, Box section: 800650 mm, Shear force: 650 Ton, Hold down cylinder: Yes, Engine: Diesel Cummins, Preloading table: No, Radio remote control: Yes, Automatic function: Yes, Weight: 59 Ton, Year: 2008, Working hours: 12,000, Documents: Yes, CE, Type: T656-SLK, SN: 120408, box length: 6000 mm, Box section: 800650mm, Shear force: 650 tone, Hold down cylinder: Yes, Engine: Diesel Cummins, Preloading table: No, Radio remote control: Yes, Automatic function: Yes, Weight: 59 tone, Year: 2008, Working hours: 12.000, Documents: Yes, CE
WAGNER SINGLE SHAFT SHREDDER WS 70, Only less than 7.000 worked hours, Length:4.680 mm, Width:3.100 mm, Height:2.410 mm, Work area:1.800 x 1.600 mm, Rotor length:1.800 mm (new 2024), Rotor diameter: 588 mm, Number of knives: 104 pc., Drive power: 90 kW, Screen size:40 mm, extraction screw (new 2024), Weight:approx. 12.000 kg, Very good conditions, [Watch Constructors video for this machine](https://www.youtube/watch?v=rDnrhGHvsBQ&ab_channel=WAGNERMasc hinenbauGmbH)
Impact mill Metso-Nordberg Brand: Metso / Nordberg Type: 1315 SR Inlet opening: 1550 x 950mm ... más información
Twin shaft shredder from Erdwich, opening 800x780 mm, hydraulic drive 30 Kw., with control cabinet mounted on frame. 1 set of new knives additionally available. ... más información
Kleemann Impact Mill Brand: Kleemann. Type: SHB 12 Inlet opening: 1430 x 1050mm Incl.: steel construction and inlet box. ... más información
Impact mill SBM Austria Brand: SBM Austria Type: HSB 125/112 4F for hard rock Inlet opening : 1150 x 450 mm Incl.: E-Motor & Hydroliek-unit ... más información
Hump shredder PHSS 40/110 Specifications: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of construction: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Material: Punching Waste, Cardboard Punching Mesh, Corrugated Cardboard
LEFORT CONQUEROR 600 T, crushing system, Cutting force: 600 t, Hold down force: 120 t, Box closing force: 2 x 240 t, Pusher ram force: 120 t, Open box dimensions: 6000x2450, Closed box dimensions: 800 x 600 mm, Baler size: 800 x 600 mm, Weight: 49 t, MOTORIZATION, Engine: …………………………………………………………… ……………………Cat, Type: diesel, Engine power: 278 HP, Year of construction: 2008, operating hours 18,000 h, Hydraulic oil tank: 2000 l, Fuel tank capacity: 1200 l, Cabin: yes, Remote control: yes, Machine is refurbished and ready for immediate use., Location: UK, Cutting force: 600 t, Hold down force: 120 t, Box closing force: 2 x 240 t, Pusher ram force: 120 t, Open box dimensions: 6000x2450, Closed box dimensions: 800 x 600 mm, Baller size: 800 x 600 mm, Weight: 49 t, Engine: Cat, Type: diesel, Engine power: 278 HP, Year of constructio ...
WEIMA WLK 18 SJ SUPER JUMBO SINGLE SHAFT SHREDDER, Totally refurbished in 2020 with replacement of electric circuits + motor + rotor + board .., 219 worked hours after refurbIshing, loading hopper 1.800 x 1.880 mm., hopper capacity approx 5,4 m3, rotor width 1.800 mm, rotor diameter 482 mm, 100 rpm, 75 kw drive, weight : about 12.000 kg, installed power : 75
Specifications Cutting width: 3.8×48 mm Productivity: approx. 40 sheets (A4, 70g/m²) Cutting speed:- Year of construction: 1989 Safety level: P3 Power supply: 400 V / 2.2 kW ... más información