otras máquinas para la eliminación de residuos y reciclaje usadas para la venta

On and off when needed Low maintenance costs (no discs, just knives which can be re-sharpened) No need to reduce size, on most scraps. Suitable for film + foam + fibers, moisture and some contamination are well tolerated. Best degassing in the process, compared with other systems. Remote assistance through modem Agglomerator with barrel diam. 1500 mm.,LxWxH 4,3 x 2,3 x 5,050 mt. 570 kw , installed power about 370 kw in work Steel cylinder case with inspection door, Side opening panel for inspection and replacing blades Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam vacuum vent 4 kW Discharging hopper complete with 200 mm diam. diagonal auger for agglomerated material 1,5 kW drive.size Z x ...

Disc separator Zeno, type ZSS 1200 x 4500, with FE separator and conveyor technology, very good condition Specifications Disc separator with elevation Manufacturer: Zeno Type: ZSS 1200 x 4500 Year of construction: 2015 Grain size: 0-30 mm Working width: 1200 mm Length: 4500 mm Drive power: 3 x 7.5 kW Separate control panel Elevation height: 1000 mm FE separators Manufacturer: Solau Type: DND-AC M5 Working width: 800 mm Drive power: 2.2 kW Self-Cleaning Device – Wiper Conveyor Feed belt Length: 5000 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.3 m/s Discharge belt Length: 3500 mm Slope: 25° Working width: 1200 mm Driver height: 40 mm Height of side wall: 400 mm Drive power: 2.2 kW Belt speed: 0.4 m/s Discharge height: min. 2000 mm Collection belt fraction 0-30 mm under disc ...

Waste water neutralisation, Capacity: 8 m3/h, Operation / Control: Control cabinet with touch-screen display / WAGO, Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

TECNOVA WATER RING PELLETIZER, Type TTC1000 vertical, Drying centrifuge with water tank and re-circulating pump, n. 1 spare pump, cyclone for granulate discharging, pulpit electric panel, now producing 1200 kg on a 160 mm extruder, Construction year 2001, Machine offered reconditioned ... más información

CROCODILE SHOVEL with 2 rear hyd. Cylinders, strong double-stiffened hold-down, available in different working widths and with different mounts, Other mounts such as Atlas, Avant, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer also available!

Screw conveyor for various materials in very high-quality design with replaceable wear parts, electrically driven, feed length approx. 7 m, feed width approx. 1 m, discharge in the middle, hardly run, very good condition, for example suitable for filling a conveyor belt with the wheel loader, etc.  ... más información

Ex Starfighter BW Please inquire with location and postcode VAT not deductible  ... más información

5.5 kW without controller Please inquire with location and postcode. VAT not deductible  ... más información

Friction scrubber with stainless steel housing and stainless steel rotor. Drive motor 22 kW ... más información

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance, drawings and instructions manual in English., Possible additions: wheeled slide, feeding screw and hopper, extraction auger, b ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](https://drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/vi ew?usp=drive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover ...

Nestro rotary valve separator valve, for the separation / differentiation of paper chips or paper edge sections Specifications: Manufacturer: Nestro Lufttechnik GmbH Year of construction: approx. 2012 Motor: 4 kW Volume flow max. 28000 m³/h Max. inlet diameter: 450 mm Speed: 22 rpm. Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (LxWxH) Weight: approx. 3000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Hydraulic Gripper ... más información

Conveyor belt Hazemag Brand: Hazemag H1= A.A length: 11,500 mm, belt width: 600 mm, drive: 1.1 kW. H2= A.A Length: 14,800 mm, belt width: 600 mm, drive: 3 kW. H3= A.A length: 3,500 mm, belt width: 500 mm, drive: 1.5 kW. H4= A.A length: 12,500 mm, belt width: 500 mm, drive: 3 kW. H5= A.A length: 10,500 mm, belt width: 500 mm, drive: 2 kW.

Technical data for the bale loosening drum:Manufacturer not knownType of bale loosening drumYear of manufacture not knownDimensions of the drum 6000 x 3000 mm (l x d)Height of the welded-in helix 300 mmDimensions of the drum frame 4900 x 3400 x 2200 mm (L x W x H)Drive power 2 x 4 kWFunctional description:The bale loosening drum was fed with pressed paper bales from which the binding wire had previously been removed. The pressed and compact bale is broken up and loosened by the baffle plates welded into the drum parallel to the conveying direction. The helix, which is welded in with an incline to the conveying direction, transports the loosened material further to the drum outlet. Here it falls through a hopper onto a conveyor belt for further processing.Scope of delivery:Bale loosening drumFrame with drive and roller bearings for the bale loosening drumComments:Documentation (operating  ...

GUILLOTINE REEL SPLITTER 50 T, Working width 2.500 mm, Working height 1.250 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., See item [RES100](https://www.germanplast.eu/listings/4115633-guillotine-reel-s litter) for full description., Force: 50 T

As good as new plant for sale Air sifting for substitute fuel, mixed construction waste, bulky waste, household waste Facility can be visited by appointment! Few operating hours Subject to prior sale!  ... más información

ID2836 Construction waste sorting plant / Bauschutt-Sortieranlage year/Year of construction 1995 Construction waste sorting plant, throughput capacity 60,000 kg/h mixed construction waste, 2500-3000 kg/year commercial waste, total 110 KW Sorting system consisting of: bunker conveyor Screening machine (cup screen) Chain conveyor for coarse material Palmiste Tape conveyor belt various chain conveyors Conveyor belts for fines and leftovers screening machine Palm Reading Tape (Ergobelt) Conveyor belt rev. and moveable Electromagnetic belt separator sorting booth Sifter System various conveyor belts sorting status compressor Additional heating for sorting cabin Construction waste sorting plant, throughput 60,000 kg/h mixed construction waste, 2500-3000 kg/year commercial waste, total 110 KW Sorting plant consisting of: Bunker conveyors Screening machine (cup scree ...

ID2842 Knott BSS 19 Evolution year/Bauahr 2017 2995 hours/hours Ballistic disc party Ballistic Disc Separator  ... más información