otras máquinas para la eliminación de residuos y reciclaje usadas para la venta

used lift-tilt device Manufacturer: L&M Type: HKV Year of construction: 2016 Net weight: 800 kg Total weight: 1,600 kg with transport castors  ... más información

used residual roller saw Manufacturer: PAAL Type: RS 40 / 250 specifications: roll diameter: 400 mm roll length: 2,500 mm Saw blade diameter: 600 mm Drive power: 22 kW transport chain speed: 2.45 to 11.75 m/min. Throughput depending on roll length and saw cutting depth: 87.5 to 175 m/h housing width approx.: 1000 mm machine length approx.: 9000 mm Machine weight: approx. 2,400 kg

used conveyor belt Manufacturer: AVERMANN Type: Chain conveyor belt Year of construction: submitted technical data: Conveyor width: 1,800 mm Axle distance: approx. 10,000 mm Installation according to photos. Subject to errors in the technical data!  ... más información

used chain conveyor belt Manufacturer: PAAL Type: KEL 1000 Year of construction: 1997 specifications: Conveying width: approx. 1,000 mm Center distance:approx. 7,500 mm Band course: ascending over the entire length, Conveyor belt drive power: 3.0 kW Side bolster height: 500 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE

Used screw compressor / screw press Manufacturer: H&G Type: DWF V11 Year of construction: 04.00 Specifications: Weight: approx. 1,800 kg Speed: 10 1/min. Operating voltage: 3/N/PE AC 400 V Frequency: 50 Hz Rated current: 22.5 A  ... más información

used chain conveyor belt Manufacturer: PAAL Type: KES 1750 Year of construction: 1993 specifications: Conveying width: 1,750 mm Feed length: 18,370 mm Riser length: 13,440 mm Drive power: 9.2 kW 2-speed speed Side bolster heights: 527 / 1027 mm  ... más información

used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW  ... más información

Dosing hoppers Manufacturer: HECKERT Type: Dosing bunker specifications: Sliding floor length: approx. 8,500 mm Sliding floor width: approx. 2,700 mm Sliding floor height: approx. 2,360 mm Side wall height: approx. 2,000 mm Capacity: approx. 40 m³ Drive power: to follow!  ... más información

used optical sorting device Manufacturer: TiTech Type: PolySort 1400 Serial-No.: X148T, A551004-00  ... más información

Several used TiTech Autosort and Polysort 700 1.000 and 1400 devices available  ... más información

used optical sorting device Manufacturer: TiTech Type: PolySort 1000 Serial No.: X092M, A551003-00  ... más información

used paper sorting system composed of: Feed belt with high side walls, standing on the floor Climbing belt as steep chain conveyor Cross band as webbing to the screening machine Screening machine Trigger tape 1 as webbing for large cardboard Trigger belt 2 as chain belt to sorting belt 1 Trigger belt 3 as belt conveyor Sorting belt 1 Sorting platform 1 with 4 boxes of approx. 3 m width each with stairs and emergency ladder Sorting cabin1 with heating and ventilation system Paper Spike 1600 Sorting belt 2 Sorting platform 2 with 3 boxes of approx. 3 m width each with stairs, flanged to sorting platform 1 Sorting cabin 2 with heating and ventilation system

used webbing conveyor belt Manufacturer: SUTCO Type: RGF GB 1400 Year of construction: 2016 Specifications: Conveying width: approx. 1,400 mm Centre distance: approx. 9,620 mm Path length: approx. 5,061 mm Gooseneck: yes Drive power: 2.2 kW  ... más información

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

Conveyor belt Svedala Brand: Svedala Sv8: A.A length = 7,800 mm, belt width: 1500 mm Propulsion: Hydraulic motor Sv9: A.A length = 7,600 mm, belt width: 1000 mm Propulsion: 3 kW drum motor  ... más información

Drying centrifuge brand: viplat, length: 1.2 m, Ø: 0.5, grill: 3 mm, motor: 22 kw (30 hp) at 3,000 rpm and electrical panel.  ... más información

Centrifuge: 1,200x550 mm. Engine: 15 hp.  ... más información

Centrifuge Brand: Sion, model: 1400x700 mm Ø, motor: 55 Kw at 2960 rpm, year: 2009. No grill and no electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... más información

Centrifuge: 1.2x0.55 Ø, motor: 30 Kw (40 hp). With pneumatic scraper for top cleaning. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... más información

Hydraulic shear (guillotine) 80 TN force. Measures cut width: 1.400 mm, height: 1.500 mm, motor: 60 hp. With electrical panel.  ... más información