máquinas para alimentos básicos y alimentos para el ganado usadas para la venta

Used UF system ALPMA / TETRA ALVA LAVAL This plant was used for the following products: -Cream cheese - Quark (low-fat quark as well as quark with 20% and 40% FiT) - Skyr - Concentration of milk 3.7% fat to 37% dry matter Depending on the product, the hourly output is approx. 3,500 - 5,000 litres (milk intake) with a service life of 8 hours. The plant consists of 3 stages: Stage 1: - 6 pressure pipes 6" with 2 spiral winding modules each (filter type SPIRA-CEL DS-UP-IP020-6338E1 Mikrodyn Nadir GmbH) - Filter area per module: 13.4m² - Total filter area: 160.8 m² - Centrifugal pump 145 m³/h, 3.5 bar, frequency converter controlled Stage 2: - 4 pressure pipes (same design as stage 1) - Filter area: 107.2 m² - Centrifugal pump: 160 m3/h, 5 bar, frequency converter controlled Stage 3: - P&F module DSS M37/9/2 from TETRA ALFA LAVAL, 9 m² - Displacement pum ...

DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...

Forberg 1000LH Twin shaft paddle mixer Serial: 1720 Stainless twin shaft paddle mixer, 1000Kgs, bottom discharge doors, inspection hatch on each side, 3Ph  ... más información

KK UNI-BA Homogenizer Model: ARIETE Type: NS5160HA Flow rate: 7000 l/h Max. Operating Pressure: 700 bar  ... más información

NNP Hopper and screw feed Stainless, 1000Kg hopper, discharge screw, screw diameter 200mm, screw length 2800mm  ... más información

MANUFACTURER: Niro Atomizer CAPACITY: 1.183 Kg/h, , APPLICATION: Milk powder and whey powder production. MACHINE COMES WITH: External vibro fluid bed dryer, Niro F35 atomizer, powder cyclones, bag filters, air pre heating economizer unit, air heating unit with steam heat exchangers, vibro sieve powder calibration unit, air ventilators, air locks, rotary valves and many accesories...

BRAIBANTI production line for pasta "Long cut" Refurbished 2023, complete control NEW Output: 3000 kg/hour Equipment: Press Pre-Dryer Divider Dryer Cool Humidifier Cutting Unit Feeding elevator for packing section Electric Control System and control panel with all inside cabling of system Dry Pasta Storage section- -8 hours capacity Vacuum Pumping system (NEW) Raw material feeding system (Rotoflow) with air transfer (Blower) (NEW) Hot water system with piping between line (NEW) Chiller system for cold water (NEW) The washing machine (NEW) Pasta die and filters (with new inserts) 2 x Packaging system (110 packs/minute) (NEW) Laboratory (Pasta grinder and Pasta moisture analyzer) (NEW) Compressed air system (NEW) Water filtering and softening system (NEW) Needed minimum building dimension: Length 4800 cm x Width 800 cm x Height 800 cm. Shall have changes according ...

Drum cleaner type EIRICH with double screen 1.5 m width  ... más información

Flour scale Chronos 50 kg good condition  ... más información

Homogenizer GAULIN MC 25 - 3TPS, SN.95L34613 Flow Rate: 10,000 l/h, maximum pressure: 170 bar, poppet valves 2-stage with MICRO-GAP valve for dairy products Main motor: 75 kW incl. control cabinet with automatic control Device will be completely overhauled, engine is newly stored,  ... más información

Atomo 3.0, max pressure 600 bar, Flow Rate 150 l / h, two-stage homogenizing valve Suitable for various foods Demonstration device, like new The new price is around Euro 32.000  ... más información

Height 1350 Width 1700 mm Length 700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel Chamber dimentions 500 mm  ... más información

Bottler with 4 x filling head (additional device for lateral movement for filling dough/mass strips) in elongated shapes Item condition:maintained Availability: immediately  ... más información

3 frothers 1) Mondomix with head REN25 for 250 liters - 1,000 liters dough/mass per hour (depending on desired impact volume) 2) Mondomix with head UB25 for 250 liters - 1,000 liters dough/mass per hour (depending on desired impact volume) 3) Mondomix with head UB25 for 250 liters - 1,000 liters dough/mass per hour (depending on desired impact volume) 4) Mondomix head UE50 (NEW) for 850 liters - 1,600 liters dough/mass per hour (depending on desired impact volume) Condition: well-kept, functional Availability: immediately Retail sale possible

Manafacture: Bizerba Power: 2.4 kW Connection: 400V/50Hz Throughput capacity: max 350 kg/h depending on type of meat and grinder use Diameter of the filling opening: 52 mm Sieve diameter: 82 mm Table meat grinder BIZERBA type FW-N 22/2 Weight approx. 50 kg Dimensions : L 33 x W 35 x H 48 cm Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60

Producent: Treif Type: Argon built 2009 FRAME KNIFE D = 32 mm  The cube and strip cutter TWISTER basic is ideal for those who are looking for a profitable solution for perfect cutting quality in the medium performance class. The machine achieves an output of up to 2,000 kg in one hour, even with continuous use. Since the cutting chamber is generously dimensioned with 550 x 120 x 120 mm (L x W x H), a high filling quantity is always ensured. Product temperature in the range from 0 to - 4 C (depending on the product). Specifications:  maximum number of cuts / minute: 300  mechanical capacity: up to 2000 kg / h - with a net (for a 40x40 mm cube)  Length of loading chamber: 550 mm  Load compartment cross-section: 96 x 96 mm  Cutting thickness: 1 - 50 mm  Machine dimensions: (L x W x H) 1740 x 1480 x 1200 mm  manual loading method  Weight: 415 kg  ...

CUTTING GATE FOR DICER RÜHLE typ SR 1- used Cutting gate sizes to the choice /optional/ : 6 and 24 mm Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Manufacturer: Fatosa Type: TBG 480 Year of construction: 2004 Power: 5.5 kW Connection: 400 V Productivity: up to 3000 kg/h Maximum size of blocks: 600 x 480 x 250 mm Max block temperature : -20°C Net weight: 550 kg Dimensions: length 1350 x width 700 x height 1750 cm With raised front cover - Height 2117 mm The guillotine is only equipped with a cross-cutting knife. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT No.: PL547-17-47-669 phone 0048/33 812 58 60 fax. 0048/33 812 58 36

POWER ELECTRONICS ASSY - CONTROL BOARD FOR FILLING MACHINE VEMAG TYPE 134 ROBBY II - / PC 880 / ARTICLE NUMBER VEMAG: 871.371-004 871.380-002-574733-5LP210695 871.360-102 - 871.360-002 072.999-005 875.821-005 - 871.821-105 871.370-004 - 871.370-701 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Description Brand Agriflex Model Impianto ID R186 Status Active Price 8.500 € + VAT Year of manufacture 2008 Location Oradea (RO) Indoor silo Agriflex Impianto ST-TR-DO 2008, suitable for flour, semola or sugar. Equiped with a product scale, control panel and a suction motor. TREVIRA fabric silo is heavily deteriorated, we recommend changing them. Volume: 5 cub. meters, size: 2100 x 2100 x 2700 mm, capacity: flour 600 kg x cub. meters - 3 tons, sugar: 800 kg x cubic meters - 4 tons. 2 pieces available. Price is per piece. Dismantled and sold as is. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-74 ...