máquinas para productos farmacéuticos y cosméticos usadas para la venta

Unused De Dietrich DN1400 2216 litre total capacity vertical glass lined receiver vessel. Nominal capacity 2000 litre. Unit has welded dished top and welded dished bottom heads. Internal rated 3 bar design pressure at 0 to 110 deg.c. Has a top clamped manhole diameter DN500 with (4) flanges - outlet/inlet. Also has a two side flanges DN50 and central bottom discharge flange DN76. Mounted on (4) carbon steel legs. Also equipped with lifting eyes.

Used Comber model PF500 stainless steel 316L nutsche filter dryer. Filtration surface 0,70 sqm. Vessel total capacity 650 litre, working capacity approx. 500 litre. Unit has welded dished top and bottom mobile filter plate with hydraulic lock and hydraulic lifting-max. stroke 600 mm. Inside diameter 950 mm. Internal rated full vacuum/4 bar max. pressure at -15/140°C. Stainless steel external jacket rated 3 bar maximum pressure at -15/140°C max. temperature. Hydraulically lifted, max. stroke 300 mm, S-blade heated agitator is top driven via gearbox by el. motor. Vari speed drive. Bottom side plug type of discharge diameter 200 mm, hydraulicaly operated. Bottom side mounted sampling valve. Has a top mounted jacketed dust filter. N2 purged and Ex-proof design. Includes hydraulic power pack and local control panel. Mounted on (3) stainless steel legs. Full documentation available.

Used bachiller model PC-200 stainless steel vacuum mixer. 338 litre total capacity, 126-200 litre working capacity. Mixing bowl approximately 866 mm diameter x 650 mm straight side. Flat top and inverted dished bottom rated full vacuum. Stainless steel jacket rated 3 bar pressure. Anchor agitator with teflon scrapers driven by 2.2 kw 220/380 volt 3/50 1415 rpm or 2.55 kw 440 volt 3/60 1715 rpm motor through sabre model mas55df gearbox 69:1 reduction ratio. Approximately 220 mm diameter dispersion blade mixer direct driven by 7.5 kw 380 volt 3/50 1450 rpm or 8.6 kw 440 volt 3/60 1755 rpm motor. Lid raised and lowered by 0.55 kw 220/380 volt 3/50 1400 rpm or 0.63 kw 440 volt 3/60 1695 rpm hydraulic power pack. New 1987.

Basket centrifuge made by ZVU, A.S. Czech Republic, model KLVN 500, perforated stainless steel basket diameter 500mm, 245mm deep, diameter of the holes (apertures) 6mm, thickness of wall of basket 4mm, equipped by additional inside screen, overall drum is from cast-iron stainless steel lined, driven by el. motor explosive proof (EXdII BT4) 50HZ/380V, 4kW, drive is mounted under the overall drum, electrical break, top loading and unloading, maximum charge 40kg of suspension, maximum revolutions 1420 rpm, total weight of the machine 590 kg.

Used horizontal pearl mill Oliver Battle model Supermill EHP-50. The stainless steel grinding chamber is equipped with a duplication and has a volume of about 51 liters. The shaft is equipped (13) with grinding discs and is driven via el. motor 36 kW, 1480 rpm, 50 Hz, peripheral speed 10 and 15 m / s (according to the processed product). Separation of grist (balls) using a sieve. It includes an integrated control panel and switchboard with power elements, as well as a pump with a flow rate of 0-923 l / h, which is driven by el. motor 0.75 kW, 230/400 V, 1400 rpm, 50 Hz.

Used J. Engelsmann model VIRO 300-800-4571-St/FDA-konform polished stainless steel (AISI 316Ti) cylindrical rotary sifter. Cylindrical screen measures 300 mm diameter x 600 mm lenght. 3-blade rotor is driven through Ex Stöber gearbox by 3.0 kW, 400 V, 1425 rpm, 50 Hz Ex electric motor, the final rpms are 602 rpm. There is also ATEX vibro motor 0.26 kW, 400 V, 3000 rpm, 50 Hz installed above the screen to increase screening efficiency. Feeding inlet has diameter 120 mm. Discharge hopper for particals smaller than holes of the screen has pneumatical valve and diameter 300 mm. Discharge hopper for particals bigger than holes of the screen has diameter 250 mm. Mounted on stainless steel frame. Overall dimensions are approx: 2600 mm x 800 mm x 2280 mm (height), weight approx 500 kg.

Used Andritz model SE 630 MD chamber membrane type filter press. Filter press has (22) plates 630 x 630 mm - combination of (10) membrane, (10) chamber and (2) end plates. Filtration surface 12.4 m2. Cake volume 163 litres, cake thickness 30 mm. Filter press frame is suitable to be extended up to 40 plates, giving max. filtration surface approx. 20 m2. The unit has hydraulic closure with a maximum closing pressure of 385 bar, a maximum filtration pressure of 15 bar. Central feeding, closed discharge, (5) eyes per plate. Dimension of the filter press: approx 3815 mm (lenght) x 1483 mm (width) x 2055 mm (height), approx 1885 kg. Includes control panel. Unit is dismantled - attached photos are from installation.

Used batch horizontal rapid mixer-homogenizer of powder mixtures manufactured by Lödige model FM 130D/MZ. The stainless steel cylindrical container with duplication has a total volume of 130 liters and a working volume of approx. 35-90 liters, the diameter of the container is approx. 490 mm x 655 mm length. The container is equipped with (1) a 520 x 310 mm filling/cleaning/inspection hole, a 200 mm top filling hole and a 120 x 160 mm rectangular bottom outlet, which is manually operated using a lever. The plow mixing blades are driven via belts by a 5.5 kW, 50 Hz, 380 V, 965 rpm electric motor. The mixing shaft is sealed with a standard cord packing. Furthermore, the device is equipped with a disintegrator of the mixed mixture, which is directly driven by a 4 kW, 50 Hz, 380 V, 2895 RPM electric motor. It includes a switchboard with an integrated control panel.

Used carbon steel 100 litre (26 gallon) capacity sigma blade double arm mixer made by Nagema (Germany) type DMK100. Stainless steel vessel inside measures 600mm long X 500mm wide X 400mm deep. Carbon steel blades are driven through gear box and belts with pulley by EL. motor 3PH/400V/50HZ/7,5kW. Tilt type of discharge. Control panel is included. Transport dimension: 2400 X 1150mm, high: 1600mm

Used Westfalia model SC 35-06-177 stainless steel clarifier centrifuge. Has intermittent solids discharge with self triggered ejection and stainless steel sludge pot. Paring device for light phase, clarifier design. Belt driven by Loher el. motor 18,5 kW/50 Hz/400V/IP55, maximum bowl speed 7270 rpm. Main switch board with integrated control panel included. Rated capacity approximately 20000 liters/hour, the jacketed hood with two coolant feeds Year of production 2000. LABEL: SC 35-06-177 RV: 2000 SN: 1721128 OT. DRUM 7270 RPM FLUID WEIGHT 1.1 KG / DM3 WEIGHT: 1.4 KG / DM3 OPERATING PRESSURE: 6 kPA PRESSURE TANK VOLUME: 0.01 M3 OPERATING TEMPERATURE 80 ° C

Used graphite exchanger / condenser SGL Carbon Technic Sas model CKL7 diameter 16-10 blocks. Total heat transfer area 102.6 m2. It consists of 10 graphite (DIABON NS1) blocks, each with a diameter of 765 mm x 347 mm high. The construction material of the exchanger shell is P265GH (W.Nr. 1.0425). The operating parameters of the process part are vacuum / 3bar maximum operating pressure at a temperature of 1-110 ° C. The service part is designed for an operating pressure of 5 bar at a temperature of 1-40 ° C. The volume of the process part is 542 liters, service 648 liters. Inlet flange diameter 450 mm and outlet flange 100 mm. Overall dimensions 1000 mm diameter x 4520 mm height. Installed on three feet. Year of production 2010. Transport dimensions: 4700mm length y 1450mm width x 1700mm height. Transport weight: 5,600 kg (4950 kg exchanger only).

Used Stephan Model UM 12 high intensity/universal vacuum mixer. Stainless steel jacketed mixing bowl has total capacity 15 litre, working capacity approx. 12 litre. Bowl rated -1/atmospheric pressure at 95°C max. temperarure. Stainless steel nonpressure jacket capacity 0,8 litre, 95°C max. temperature. Has bottom S-blade type of agitator driven via dual speed el. motor 1.5/1.9 kW, 1420/2810 rpm, 50 Hz, 400 V. The vessel has top entry manual teflon wall scrapper. Integrated el. switchboard with local control panel. Also includes vacuum pump DVP Vacuum Italy model LB.5WR and el. heater Thermo Haake model C10 with circulation pump for heating jacket.

Laboratory table in good condition capable of supporting weights up to 250 kg. Measures 1.5 x 0.9 x 3.4 m (width, height, length). It is demountable ... más información

Wsk Kraków UVPX 207 Centrifuge / separator Centrifuge, a separator, centrifuge UVPX 207 UVPX 207 Wsk Kraków UVPX 207 ... más información

Alfa Laval BRPX 214 Separator centifuge used Manual Tools Beer, wine, juices Used For review Hydraulic capacity 30.000 l /h ... más información

Alfa Laval BRPX 213 -35H-22 Motor 18,5 kW Hydraulic capacity 18.000 l/h ... más información

Alfa Laval BRPX 214 Separator centifuge used Manual Tools ... más información

De Laval, Alfa laval, separator centrifuge FL 118 EM De Laval FL 118 EM used ... más información

Alfa Laval BRPX 313 SFD-34C Separator Alfa Laval BRPX 313 SFD-34C tools control panel ... más información

Alfa Laval Alfa Laval UVPX 307 AGT 14 separator centrifuge oil fish , olives Alfa Laval UVPX 307 AGT 14 ... más información