prensas usadas para la venta

pressure: 160 tthroat: 360 mmstroke: 560 mmtotal power requirement: 33 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: 2000x2400x3650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

Conductive force: 63 t Projection: 280 mm Table size: 500 x 600 mm Installation height: without straightening bridge 600 mm stroke: 160 mm Tappet speed upwards: 117 mm/s m/min Rotary speed downwards: 42 mm/s m/min Space requirement: 1600 x 700 x 2400 mm Weight: 3900 kg  ... más información

PRESS FORCES  total force (nominal): 72 toA new electrical control system and a mechanical and lubrication rebuild are required.One used PLATARG model 611 transfer press, high speed type.Full follow cams.Number of stations: 12Number of rams: 11 + 1 slaveCapacity on any one ram: 6 tonsSpeed range: 30 – 120 SPMMax shell height: 20 mmTransfer slideMachine awaiting refurbishment

pressure: 50 tthroat: 250 mmstroke: 8-120 mmno. of strokes: 115 Hub/minram - range of adjustment: 70 mmtable surface area: 650x510 mmram surface: 400x180 mmhole in the table: Ø 180 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 1500x2500x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 280 mmstroke: 160 mmtable surface area: 560 x 500 mmram surface: 280 x 280 mmdayligth: 400 mmoil volume: ca. 360 ltotal power requirement: 22 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 1,45 x 1,75 x 2,67 m- Workroom enclosure with Sick light barrier- Large ram with ejector and pin clamp- foot switch- Motorized depth stop in the cylinderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mechanical Press SCHULER ES2 400 T Manufacturer: SCHULER Model: ES2 400 T Year of manufacture: 1978 Condition: working. Press capacity 400 T Slide stroke 610 mm slide adjustment 305 mm Die Height 1018 mm bolster size 2743 x 1524 mm number of strokes 20 SPM required power 82 kW table height over floor 400 mm Die cushion capacity 70 T Die cushion stroke 203 m weight app. 120 T Stroke dia at four pressure points: 400 x 190 mm Stroke dia for pressure transformer: for pneumatic: 200 mm for hydraulic: 30 mm extending table: Pulling device in the table: Puller quantity: 2 pieces Pneumatic cushion quantity: 2 pieces Pressure plate surface on cushions: 1170 x 977 mm Impact diameter: 1000 mm Push stroke: 203 mm Total force at pressure above 6 atm. : 70 Mp

pressure: 40 tdistance between columns: 600 mmstroke: 150 mmtable surface area: 600x410 mmram surface: 220x130 mmtable height: 850 mmweight of the machine ca.: 2,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

pressure: 5 ttable size: 200 x 250 mmpneumatic: weight of the machine ca.: 100 kg: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

pressure: 250 tchamfer lenght: mmthroat: mmstroke of ram: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... más información

pressure: 80 tthroat: - mmstroke: 8 - 112 mmtable surface area: 830 x 550 mmno. of strokes: 30 - 85 Hub/minram surface: 630 x 400 mmram adjustment: 71 mmclamping plate: 990 x 550 mmtable height over floor: 810 mmtotal power requirement: 10 kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: 1,5 x 2,2 x 3,15 mEquipment:- with wheel presentation- fixed table- with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mmSelling price applies without inspection and without a test run.The machine should be partially overhauled in our house (at an additional cost)- Complete disassembly and review- livery- new control cabinet with PLC and touchscreen including cabling.Price of the machine in partially overhauled condition: € 44,000.00Delivery time for the partially overhauled machines: by agreementThe data for this ad was created with ModulMWS - the software solution of Logo ...

pressure:040 tstroke:8 - 50 mmno. of strokes:50 - 300 /mindistance between columns:600 mmdistance table/ram, max. stroke up, adjustment up:285 mmtable surface area:590 x 500 mmhole in the table:590 x 40 - 100 mmtable height over floor:860 mmcolumn travel -side:280 mmram surface:590 x 380 mmram adjustment:80 mmmaterial width of feeder:150 mmpower requirement:7,5 kWclutch:pneumatic ram adjustment:motoric pincer feed:mechanical

Pressure:150 tstroke:fix 80 mmno. of strokes:30 - 150 /mindistance between columns:930 mmdistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:880x1300/1500x600 mmhole in the table:760 x 180 mmtable height over floor:1270 mmcolumn travel -side:650 mmram surface:920x1000/1300x600 mmweight:27,5 tDimensions (WxDxH):3,1 x 1,8 x 4,3 mWITHOUT feeder:can be offered optionally

Pressure:250 tstroke:30 mmno. of strokes:60 - 500 /minDistance between columns:1500 mmdistance table/ram, max. stroke up, adjustment up:390 mmtable surface area:1580 x 1100 mmhole in the table:1270 x 300 mmtable height over floor:1470 mmside window:600 mmram surface:1500 x 900 mmram adjustment:100 mmmaterial width:500 mmmaterial thickness:0,5 - 1,5 mmcoil weight:6,5 tcoil internal diameter:420 - 560 mmcoil external diameter:1500 mmpower capacity:45,0 kWWeight:44,0 tDimensions (WxDxH):3,3 x 1,8 x 4,5 mclutch:pneumatisch ram adjustment:motorisch double decoiler:LH 2-1,5-500 straightening machine:R 500 roll feed:mechanisch; Schuler, WK 8-500

pressure: 2000 /1000 tdistance between columns: 2650 mmstroke: 500 mmcolumn travel -side: 500 x 1000 mmdiameter of piston: 710 mmnumber of pistons: 2 distance between table / ram: 1000 mmoperating pressure: 130 / 230 bardayligth: 800 mmtable length: 2500 mmtable width: 1600 mmtable height: 250 mmdraw back pressure: 500 kNnumber of T-slots: 8 turning speeds: 1500 U/minrapid speed: 120 - 140 mm/minclosing speed: max. 120 - 140 mm/sec.hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/seccutting sound absorber: 300 tdie cushion capacity: 200 tdie cushion stroke: 250 mmspeed of die cushion: 100 mm/secvoltage: 380 Vfrequency: 50 Hzquantity of oil: 2000 ltotal power requirement: 93 kWweight of the machine ca.: 90 tdimensions of the machine ca.: 5000 x 2500 x 7200 mmtransport measurements: ca. 6500 x 3750 x 2190 mm1991 assembly of a die cushion, pressure reducti ...

pressure: 25 tdistance between columns: 580 mmstroke: 150 mmdayligth: 370 mmtable surface area: 560x400 mmram surface: 400x350 mmhole in the table: 80 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1500x500x2500 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity 500 tons Speed 20 spm Bed area 2800 x 1800mm Ram area 2800 x 1700mm Stroke 500mm Die height 1100mm SDAU weight 130 tons  ... más información

pressure:050 tthroat:250 mmstroke:8 - 120 mmno. of strokes:100 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:650 x 515 mmhole in the table:115 mmtable height over floor:790 - 1020 mmtable adjustable:230 mmram surface:390 x 180 mmram adjustment:70 mmpower requirement:2,0 kWweight:2,6 tdimensions (WxDxH):1,1 x 1,4 x 2,2 moverload protection in ram:mechanical

pressure:125 tthroat:340 mmstroke:20 - 160 mmno. of strokes:55 /mindistance table/ram, max. stroke up, adjustment up:480 mmtable surface area:1000 x 660 mmtable height over floor:730 mmram surface:600 x 300 mmram adjustment:75 mmpower requirement:8,5 kWweight:7,8 tdimensions (WxDxH):1,4 x 2,8 x 2,7 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical

pressure: 80 tthroat: 280 mmstroke: 8-112 mmno. of strokes: 55 / 82 Hub/minram - range of adjustment: 80 mmtable surface area: 800x570 mmram surface: 560x355 mmhole in the table: Ø 280 mmtable height: 800 mmtool hole in ram: Ø 50 mmtotal power requirement: 7,5 kWweight of the machine ca.: 6 tdimensions of the machine ca.: BxTxH 1600x2200x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RADAELLI DELFINO 3 350T eccentric press built in 1978 in Italy by CUGINI RADAELLI & C, is the perfect solution for even the most intensive mass production of various types of parts. All of this is possible thanks to its extremely high press force of 350 tonnes and extensive machining capabilities, which enable, among others, precise cutting, machining, bending and punching of metal sheets and bands. To further increase production efficiency, the entire process can be fully automated after retrofitting the machine with a decoiler and sheet feeder. The RADAELLI DELFINO 3 H-type press weighs approximately 60 tonnes. Technical specifications of the RADAELLI DELFINO 3 mechanical press - maximum press force: 350 t - work table dimensions (L x W): 2500 x 1600 mm - slider dimensions (L x W): 2500 x 1200 mm - slider adjustment: 200 mm - slider stroke: 300 mm - number of slider strokes: 2 ...