prensas usadas para la venta

Description: Capacity: 10 tonnes Collection on: 29/04/2024 or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item description  ,Approx. Onsite Dimension. (l x w x h): 600 x 1,000 x 2,300 mm, weight approx.: 1,000 kg

pressure:025 tthroat:200 mmstroke:8 - 80 mmno. of strokes:180 /mindistance table/ram, max. stroke up, adjustment up:330 mmtable surface area:550 x 400 mmhole in the table:60 mmtable height over floor:800 mmpassage to the back:200 mmram surface:355 x 220 mmram adjustment:50 mmpower requirement:2,7 kWweight:2,5 tdimensions (WxDxH):1,2 x 1,8 x 2,4 moverload protection in ram:mechanical

Pressure capacity: 500KN, stroke: 8-100mm, stroke rate: 100/min. Ram adjustment: 80mm, drive: 4kW, weight: 2850kg. Safety distance: 175mm, overtravel: 53mm, overtravel time: 110ms. ... más información

Description: Technical data Locking force 120,000 kN Preforming force 2,400 kN Retraction force 2,000 kN Max. Mold weight upper part 30,000 kg Plunger stroke 1250 mm Closing speed (theoretical 450 mm/s)400 mm/s Max. Pressing speed 150 mm/s Return speed (theoretical 450 mm/s) 400 mm/s Positioning accuracy ± 0.1 mm Measuring resolution 0.01 mm Pressure regulating systems for gun pre-tensioning Number of independent systems 2 sets (1 x top, 1 x bottom) Max. Pressure 25 MPa Max. Return flow rate 2 x 900 l/min Accuracy of pressure regulation ± 0.5 MPa Pump - Motor Pump capacity 3 x 360 l/min Max. Working pressure 30 MPa Electric motors (3 x 160) 480 kW Electric motor cooling/filter circuit22 kW Speed1450 rpm (50 Hz) Pressure accumulator system Min. - Max. Working pressure 27 - 30 MPa Volume piston accumulator (6 x 50) 300 liters Oil tank volume 4000 liters Dimensionen Werkzeugeinbau ...

Pressure:035 tthroat:225 mmstroke:8 - 100 mmno. of strokes:130 /mindistance table/ram, max. stroke up, adjustment up:370 mmtable surface area:580 x 450 mmhole in the table:210 x 170 mmtable height over floor:700 mmram surface:350 x 180 mmram adjustment:70 mmpower requirement:2,2 kWweight:2,2 tdimensions (WxDxH):1,0 x 1,8 x 2,2 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical

Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. ... más información

Description: Electric connection: 380VApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm, weight approx.: 1,000 kg ... más información

Pressure capacity: 85t/850kN, ram stroke: 30-110mm, ram adjustability: 50mm. Documentation available. ... más información

Description: closing height: ,250 mm table plate thickness: ,100 mm slide adjustment: ,80 mm bottom table dimensions: ,900 x 560 mm upper table dimensions: ,560 - 360 mm speed: ,40 g/min damaged upper table  , please also have a look at the videos of this machine table surface area l x w : 900 x 560 mm, weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,300 x 2,900 mm

pressure:120 tdistance between columns:430 mmstroke:125 mmdistance table/ram, stroke up:400 mmtable surface area:430 x 450 mmtable height over floor:860 mmside window:230 mmram surface:250 mmworking speed:10 mm/spower requirement:11,0 kWweight:2,5 tdimensions (WxDxH):1,6 x 1,3 x 2,4 mGerman Safety: permitted for manual loading:CE-sign

Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024. ... más información

Description: serial number B239002 , press force 1500 kN , sheet thickness: 0.5-15 mm bending lenght 4050 mm maximal stroke 1760 mm maximal working pressure 205 bar distance between columns 3150 mm distance from ram to bed 420 mm troath depth 400 mm power of main motor 11 kW supply / frequency 400 V, 50 Hz approach speed 80 mm/sec working speed 6 mm/sec return speed 45 mm/sec Approx. Onsite Dimension. (l x w x h): 4,280 x 1,545 x 2,500 mm, weight approx.: 12,925 kg

Pressure:250 tstroke:30 mmno. of strokes:60 - 500 /minDistance between columns:1500 mmdistance table/ram, max. stroke up, adjustment up:390 mmtable surface area:1580 x 1100 mmhole in the table:1270 x 300 mmtable height over floor:1470 mmside window:600 mmram surface:1500 x 900 mmram adjustment:100 mmmaterial width:500 mmmaterial thickness:0,5 - 1,5 mmcoil weight:6,5 tcoil internal diameter:420 - 560 mmcoil external diameter:1500 mmpower capacity:45,0 kWWeight:44,0 tDimensions (WxDxH):3,3 x 1,8 x 4,5 mclutch:pneumatisch ram adjustment:motorisch double decoiler:LH 2-1,5-500 straightening machine:R 500 roll feed:mechanisch; Schuler, WK 8-500

Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg.

Description: machine number: 6114.14 serial number: 260036616 T pressing pressure: 155 kN motor power: 4 kW Approx. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 1,800 mm, weight approx.: 1,000 kg ... más información

impact energy:207951 mkgram hammer stroke:660 mmno. of strokes:100 /minimpact energy:2040 kJdistance lower die block / ram gudeway:660 mmThroat:750 mmsteel forging - rectangular up to:240 mmsteel forging - diameter up to:270 mmpower requirement:75,0 kWweight of hammer:16,5 tweight of anvil:15,5 tram hammer weight:750 kgweight:32,0 tdimensions (WxDxH):3,2 x 1,45 x 3,45 mMode of operation:pneumatisch

pressure:500 tdistance between columns:1910 mmstroke:500 mmDistance table/ram, max. stroke up, adjustment up:700 mmtable surfache without cutting impact cushions:1910 x 1360 mmtable surfache with cutting impact cushions:1600 x 1360 mmtable height over floor:800 mmram surface:1600 x 1270 mmSide window:600 mmspeed down:400 mm/sspeed up:330 mm/sworking speed:10 - 28 mm/soil volume:1200 lpower requirement:60,0 kWweight:40,0 tDimensions (WxDxH):3,6 x 2,5 x 5,0 mheight over floor:4,5 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 cutting impact cushioning:hydraulic ram interlocking:hydraulic

pressure:200 tdistance between columns:1400 mmstroke:300 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:1300 x 1100 mmpressure of drawing cushion in table:80 tstroke of drawing cushion in table:150 mmdie cushion area:700 x 700 mmcapacity of ejector in ram:10 tejector stroke in ram:50 mmtable height over floor:930 mmside window:770 mmram surface:1300 x 1100 mmspeed down:400 mm/sspeed up:410 mm/sworking speed:20 - 50 mm/sreturn capacity:30 toil volume:1350 lpower requirement:70,0 kWweight:23,0 tdimensions (WxDxH):4,5 x 3,0 x 3,5 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic ejector in ram:hydraulic foundation pit:not necessary

Pressure:1000 tdistance between columns:4100 mmstroke:1200 mmDistance table/ram, stroke up:2100 mmTable surface area:4000 x 2200 mmpressure of drawing cushion in table:360 tDie cushion stroke in table:300 mmDie cushion area in table:3500 x 1600 mmDie cushion pressure in ram:100 tDie cushion stroke in ram:160 mmDie cushion area in ram:3250 x 1600 mmRam surface:4000 x 2200 mmSide window:1300 mmOil volume:8000 lPower capacity:300,0 kWDimensions (WxDxH):5,75 x 4,3 x 9,55 mHeight above floor:7,7 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact cushioning:hydraulic

Pressure:1600 tdistance between columns:4100 mmslide stroke:1450 mmDistance table/ram, stroke up:2750 mmdistance table/blank holder, stroke up:2200 Table surface area:4000 x 2200 mmram pressure:1000 tPressure of blank holder:600 tstroke of blankholder:1000 mmblank holder surface:4050 x 2200 mmRam surface:3200 x 1650 mmpressure of drawing cushion in table:360 tDie cushion stroke in table:300 mmdie cushion area:3500 x 1600 mmSide window:1100 mmOil volume:9000 lPower capacity:390,0 kWWeight:250,0 tDimensions (WxDxH):5,95 x 4,3 x 10,5 mHeight above floor:8,6 mdie cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable