Fabricante:
(Categoría: 106)
Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s
Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm ... más información
Inv. Num. : 6050 Type: 30T Producer: MEYER Produced: 1982 Parameters: Compressive force: 30 t Distance between frame walls: 300 mm Lifting height: 200 mm ... más información
Catalog No. : 6536 Type: TRUMATIC 500 R Producer: Trumpf Made in: 2000 Characteristic: Hours on: 36200 h Pressing force: 220 kN Travel length X-axis: 2500 mm Travel length Y-axis: 1250 mm Machine weight: 11050 kg Equipment: Tool Cartridges (2x) USB Interface ... más información
Inv. Num. : 6606 Type: LDC 250 Producer: SMERAL Created: 1980 Parameters: Compressive force: 250 t Maximum stroke rate upper table: 38 1/min Ram stroke: 200 mm Adjustment of the plunger: 120 mm ... más información
Inv. Num. : 6612 Type: Trumatic 500 Producer: Trumpf Created: 1955 Parameters: Operating hours: 69739 h Compressive force: 220 kN Maximum length of the sheet plate: 2500 mm Maximum blade width: 1250 mm Machine weight: 11050 kg 4 cassettes for a single tool and a cassette for a 6-way multitool
Inv. Num. : 6443 Type: TECHNICA PLUS Producer: DERATECH Created: 2009 Parameters: Control system: Cybelec DNC 880 S Operating hours: 3040 h Compressive force: 250 t Maximum bending length: 4100 mm Total power requirement: 18.5 kW Machine weight: 18000 kg Equipment: Tools 2-axis backgauge
Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm ... más información
Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg
Inv. Num. : 5451 Type: 1250 F1 Producer: SIMASV Created: 2011 Parameters: Compressive force: 30 t Maximum sheet thickness: 6.3 mm Maximum punching speed: 450 1/min Punching diameter: 89 mm Machine height: 2400 mm Machine length: 4200 mm Machine width: 3700 mm Machine weight: 5500 kg
Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control
RADAELLI DELFINO 3 350T eccentric press built in 1978 in Italy by CUGINI RADAELLI & C, is the perfect solution for even the most intensive mass production of various types of parts. All of this is possible thanks to its extremely high press force of 350 tonnes and extensive machining capabilities, which enable, among others, precise cutting, machining, bending and punching of metal sheets and bands. To further increase production efficiency, the entire process can be fully automated after retrofitting the machine with a decoiler and sheet feeder. The RADAELLI DELFINO 3 H-type press weighs approximately 60 tonnes. Technical specifications of the RADAELLI DELFINO 3 mechanical press - maximum press force: 350 t - work table dimensions (L x W): 2500 x 1600 mm - slider dimensions (L x W): 2500 x 1200 mm - slider adjustment: 200 mm - slider stroke: 300 mm - number of slider strokes: 2 ...
PLASOMAT PMS 63 CP eccentric press was manufactured in Poland. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adjustment: ...
FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...
SPK KB 2132 eccentric press was manufactured in the USSR in 1980. Operating with a force of 160 tonnes, the press of almost indestructible design offers the highest quality and precision during the most demanding workpiece machining. The machine’s equipment includes among others a pneumatic clutch, a large-area slider performing up to 71 strokes per minute, central lubrication and manual control. The total weight of the press is 13200 kg. Technical data of the SPK KB 2132 press - maximum press force: 160 t - work table dimensions (L x W): 1000 x 700 mm - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider dimensions (L x W): 580 x 460 mm - slider adjustment range: 120 mm - slider stroke rate: 71/min - intermediate plate thickness: 110 mm - distance between work table and slider (slider in lower position, largest stroke, connector unscrewed): 480 mm - bore ...
EUROMET Y41-63T hydraulic press manufactured in 2007 is designed for machining metal sheets, sections and profiles. EUROMET Y41 63T hydraulic press has a monolithic structure resistant to any deformations, which, combined with the 63-ton press force, allows to achieve excellent precision and quality of machining both in medium and large series production. Technical parameters of EUROMET Y41-63T hydraulic press - maximum press force: 63 t - work table dimensions (L x W): 580 x 560 mm - piston rod speed (pressure): 10 mm/s - piston rod speed (return): 95 mm/s - piston rod speed (no load): 38 mm/s - piston rod stroke: 500 mm - maximum piston rod feed: 800 mm - power: 7.5 kW
ERFURT PKZZ 315 double column press manufactured in 1984 in Germany is used for, among others, cutting, machining, bending and punching sheet metal and strip metal. Features such as the ability of extensive workpiece machining, a large work table and a 315-tonne operating slider make the crank press ideal for mass production of things such as washing machine parts, agricultural machinery or other types of vehicles. The ERFURT mechanical press is also distinguished by its high-quality welded steel construction, ensuring excellent stability during the production process. The machine uses a slider with a beam ejector, which is adjustable within a range of 400 mm via a motor reduction gear with overload protection. In order to increase the life of the tools and the quality of the parts produced, the 2500 mm long and 1400 mm wide work table has been equipped with hydropneumatic cushions. ...
PY-3.5 T fly press is used for extrusion and pressing of bearings and bolts, as well as for other locksmith work. The offered manual screw press with a maximum pressing force of 3500 kg is new. Technical data of the PY-3.5 T press - maximum press force: 3500 kg - stroke: approx. 200 mm - weight of machine: approx. 100 kg
PONAR ŻYWIEC PHM 160 D hydraulic press manufactured in Poland in 1990 is used for machining metal and processing plastics (e.g. polofen or melamine) or rubber. The machine characterised by its high reliability, performs precise machining with a force of 160 tonnes in manual mode as well as in semi-automatic or automatic mode, thanks to its being equipped with time relays. The gantry press is also equipped with, among others, a hydraulic ejector with a force of 60 tonnes and two temperature controllers for the upper and lower parts of the heating plate. The offered machine was purchased from the university and has never worked during typical production. The total weight of the machine is 4000 kg. Technical parameters of the PONAR ŻYWIEC PHM 160 D press - maximum pressing force: 160 t (1600 kN) - ejector force: 60 t (600 kN) - working table surface (L x W): 800 x 800 mm - pressin ...
ZTS KOSICE LEK 160 eccentric press was built in 1985 in Czechoslovakia. The press, operating with a force of 160 tonnes and a slider making up to 50 strokes per minute, is designed for, e.g. punching, cutting and pressing of workpieces. Machining is performed on a large work table with a length of 1000 mm and a width of 740 mm, with full illumination in the form of a lamp mounted on the body of the KOSICE LEK 160 machine. The total weight of the machine is 12180 kg. Technical data of the ZTS KOSICE LEK 160 press - maximum press force: 160 t (1600 kN) - work space dimensions (L x W): 1000 x 740 mm - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 32/min - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider adjustment range: 100 mm - reach: 355 mm - workspace illumination - weight of the KOSICE LEK-160 machine: 12180 kg